Menu
EUR

Tractor parts Fendt Favorit 509 (Typ 509)

Looking for parts for your Fendt Favorit 509 (Typ 509) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

690 parts found for Fendt Favorit 509 (Typ 509)
Show:
Hose elbow return line heating Fendt Farmer 307-309, Favorit 509
V-belt pulley Fendt
€156,36 €129,22 €142,35 €117,64
You save 9%
Radiator hose Ø 18 mm, length 1000 mm Fendt
Inner Ø: 18 mm. Length: 1000 mm. More
Inner Ø: 18 mm. Length: 1000 mm.
€43,88 €36,26 €39,90 €32,98
You save 9%
Radiator hose, oil cooler inner-Ø 18 mm Fendt
€59,82 €49,44 €54,45 €45,00
You save 9%
Radiator hose, oil cooler Ø 18 mm Fendt
Inner Ø: 18 mm. More
Inner Ø: 18 mm.
€132,59 €109,58 €120,70 €99,75
You save 9%
Tank cap reservoir thread 47 mm, grommet-Ø 47 mm
Neck Ø: 47 mm. Version: Thread 47 mm, For expansion tank. More
Neck Ø: 47 mm. Version: Thread 47 mm, For expansion tank.
€12,25 €10,12
Radiator hose, top Ø 49 mm Fendt Farmer 310-312, Favorit 509-511
€81,72 €67,54 €74,35 €61,45
You save 9%
Flame glow plug 9,5 V, 20 A, M20 x 1,5 Fendt
Version: 9.5 V, 20 A, Thread M20 x 1.5. To fit: Fendt. More
Version: 9.5 V, 20 A, Thread M20 x 1.5. To fit: Fendt.
€81,93 €67,71 €74,55 €61,61
You save 9%
Main bearing standard Ø 70 mm Fendt, Renault
Dimensions: Ø 70 mm. More
Dimensions: Ø 70 mm.
€35,72 €29,52 €32,50 €26,86
You save 9%
Hose lubricating pipe turbocharger Fendt
€48,04 €39,70 €43,70 €36,12
You save 9%
Repair set feed pump Fendt
Adjusting bolt Fendt
€35,33 €29,20 €32,15 €26,57
You save 9%
Valve stem seal
€3,46 €2,86
Crankshaft seal rear outer-Ø 130 mm, inner-Ø 110 mm, width 13 mm
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. More
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm.
€25,25 €20,87
Return line fuel line Fendt Farmer 305-310, Favorit 509, 510
€168,54 €139,29 €153,40 €126,78
You save 9%
Seal kit steering valve Fendt
€38,33 €31,68 €34,90 €28,84
You save 9%
Cover hydraulic pump Fendt
€657,52 €543,41 €598,60 €494,71
You save 9%
Seal kit lift cylinder/front linkage Ø 28/70 mm Fendt
€173,99 €143,79 €158,40 €130,91
You save 9%
Pin Fendt Farmer 310-312, Favorit 509-515, Xylon 520-524
€304,59 €251,73 €277,25 €229,13
You save 9%
Adjusting nut for lower link strut M27 x 3 Fendt
Dimensions: Thread = M27 x 3 mm. More
Dimensions: Thread = M27 x 3 mm.
€58,94 €48,71 €53,65 €44,34
You save 9%
Joint Fendt Farmer 300, Favorit 500, GT 390, 395, Xylon 520-524
€205,53 €169,86 €187,10 €154,63
You save 9%
Housing for lifting strut Fendt
€401,52 €331,83 €365,50 €302,07
You save 9%
Pin for lower link support 22 x 89 mm Fendt
Dimensions: 22 x 89 mm. More
Dimensions: 22 x 89 mm.
€35,45 €29,30
Gas strut rear window 300 N, 600 mm Fendt
Newtons: 300. A: 600 mm. B: 300 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 300. A: 600 mm. B: 300 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€33,06 €27,32 €30,00 €24,79
You save 9%
Locking pawl quick coupling cat. 1, 2 Fendt Farmer, Favorit
€84,18 €69,57 €76,60 €63,31
You save 9%
Pin for top link 25,4 x 140 mm Fendt
Dimensions: 25.4 x 140 mm. More
Dimensions: 25.4 x 140 mm.
€49,03 €40,52 €44,60 €36,86
You save 9%
Pin 22 x 185 mm Fendt
Dimensions: 22 x 185 mm. More
Dimensions: 22 x 185 mm.
€67,01 €55,38 €60,95 €50,37
You save 9%
Buffer hood Fendt
Handle body parts Fendt
Contact switch idle plunger switch, plug connector blue
Version: Plug connection, blue. More
Version: Plug connection, blue.
€68,10 €56,28
Hall sensor 40 mm, engine speed B, PTO shaft C rear, E for
Version: 40 mm, engine speed B, rear PTO speed C, front PTO speed E. More
Version: 40 mm, engine speed B, rear PTO speed C, front PTO speed E.
€162,10 €133,97
VDO Oil pressure switch engine M14 x 1,5, 0 - 5 bar, 10 - 184 Ohm, 2-pin
VDO
Version: Thread: M14 x 1.5, Pressure measuring range: 0 - 5 bar, Resistance values: 10 - 184 ohm, Outlet: 2-pin floating ground. Mounting Ø: 46 mm. More
Version: Thread: M14 x 1.5, Pressure measuring range: 0 - 5 bar, Resis...
€85,06 €70,30 €77,40 €63,97
You save 9%
Oil pressure switch comfort operation with connection cable and plug
Version: Connection cable and plug. Menke no.: 208165. More
Version: Connection cable and plug. Menke no.: 208165.
€253,90 €209,83
Showing 337 - 384 of 690

Fendt Favorit 509 (Typ 509) specs

The Fendt Favorit 509 C is the entry-level model of the Favorit 500C series, which Fendt introduced in the autumn of 1993. The names Favorit 509 (Typ 509) and Favorit 509C (Typ 509) refer to the same model. The tractor was built from 1994 to 2000, with a total of 1,490 units produced during that period. Despite being the smallest model in the series, its technical specification closely matched that of the much heavier Fendt 800 series. The 509 C was designed as a versatile tractor suitable for ploughing, harvesting, loading and transport work.

Engine and power

Under the hood sits an MWM four-cylinder turbodiesel, type TD 226 B-4, with a displacement of 4,156 cc. Engine output is 95 hp (70.8 kW) at 2,100 rpm. Maximum torque is 381 Nm at 1,500 rpm. Fuel delivery is handled by a Bosch VE distributor pump with automatic advance and multi-hole injectors. Maximum injection pressure is 850 bar. Further features include overhead valves, pressure lubrication, piston crown cooling and a gear-driven camshaft. Cooling is handled by a thermostatically controlled dual-circuit system with a viscous fan coupling and exhaust turbocharger. The constant power range runs between 1,900 and 2,400 rpm, and an oil change is only required after 500 operating hours. The fuel tank holds 135 litres.

Transmission

The 509 C uses a ZF 7200 Turboshift gearbox, a fully synchronised unit with four-speed powershift and electro-hydraulic reverser operated by a single lever. The gearbox offers 44 forward and 44 reverse gears, consisting of 24 working gears and 20 creep gears. A notable feature is the Voith fluid coupling (type 390 TD-F), positioned ahead of the wet multi-disc clutch. This hydraulic coupling smooths out power delivery and protects the drivetrain from shock loads. Direction changes can be made without depressing the clutch, thanks to the synchronised reverser with preselect function. Standard top speed is 40 km/h, with an optional increase to 50 km/h.

Hydraulics and PTO

  • Hydraulic pump: closed system with a flow rate of 101.8 litres per minute
  • Rear three-point hitch lift capacity: 5,508 kg (category II/III)
  • Control: lower-link draft sensing
  • Rear PTO: independent, electro-hydraulic, 540/750/1000/1400 rpm
  • Front PTO: independent, optional, 1000 rpm
  • Front and rear differential lock: electro-hydraulic

Dimensions, weight and tyres

The operating weight of the tractor is 4,970 kg. Wheelbase is 233 cm. Standard tyre sizes are 420/70R24 front and 480/70R38 rear, though 18.4 R38 rear was also used. The electrical system runs on 12 volts with a 110 Ah battery and alternator charging.

Cab

The cab of the 509 C was at launch nearly identical to that of the Farmer 300 series, with a noise level of 72 dB(A). In 1995 the cab comfort was upgraded. Heating was standard, air conditioning was optional. The cab was fitted with a sprung suspension mounting.

Parts and brands for the Fendt Favorit 509 C

We supply parts for the Fendt Favorit 509 C, for both routine maintenance and full restoration. This covers engine parts, cooling components, exhaust systems, fuel filters, hydraulic components, brakes, electrics and cab parts. The parts we supply come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart