Menu
EUR

Tractor parts Fendt Favorit 509 (Typ 509)

Looking for parts for your Fendt Favorit 509 (Typ 509) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

690 parts found for Fendt Favorit 509 (Typ 509)
Show:
Push button switch work light, top 12 / 24 V, button green, Ø 30 mm
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals 6.3 x 0.8 (L- R- 49a- 30b- 15- 49), dustproof and splashproof. More
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals...
€33,00 €27,27
Knob loose for switch heater setting
Version: For switch, heater adjustment. More
Version: For switch, heater adjustment.
€38,45 €31,78
Knob for blower switch
Version: For blower switch. More
Version: For blower switch.
€9,20 €7,60
Push button switch hazard lights 12 / 24 V red, with lock
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€57,83 €47,79 €52,60 €43,47
You save 9%
Plug housing 7-pin for push button switch
Number of pins: 7. Additional information: • For push button switch. More
Number of pins: 7. Additional information: • For push button switch.
€8,60 €7,11
HELLA Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
HELLA
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Material: Plastic. Depth: 7 mm. Fixing: Horizontal. Installation location: Left, right.... More
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Materia...
€1,96 €1,62
Cobo Work lamp H3 55 / 70 W, square, 178 x 86 x 73 mm, 12 / 24 V
Cobo
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Dimensions W x H x D: 178 x 86 x 73 mm. Nominal voltage: 12 / 24 V. Cable length: 250 mm. Pow... More
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Dimensions W ...
€59,43 €49,12 €54,10 €44,71
You save 9%
Light housing
€9,35 €7,73
Cable set
€35,60 €29,42
Pipe RKLE
€102,02 €84,31 €92,85 €76,74
You save 9%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€38,51 €31,83 €37,00 €30,58
You save 4%
HELLA Work lamp spotlight H3 12 / 24 V, 158 x 162 x 127 mm, bracket assembly
HELLA
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 158 x 162 x 127 mm. Light function: Far-reaching illumination. Connection: Open c... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€75,63 €62,50 €72,80 €60,17
You save 4%
Relays relays make contact 12 V, 70 A, 4-pin, 6,3 mm, with holder
Version: 12 V / 70 A, With holder, 4-pin, flat plug connection 6.3 mm, With blocking diode, parallel resistor for suppressing inductive interference v... More
Version: 12 V / 70 A, With holder, 4-pin, flat plug connection 6.3 mm,...
€27,50 €22,73
Tension spring brake pedal Fendt 250 S (Typ 295) - 615 (Typ 285), GT 350-395
To fit as: Fendt Farmer 303, 304 (from serial no. 158/3901), 305, 306, 307, 308, 309, 310, 311, 312 More
To fit as: Fendt Farmer 303, 304 (from serial no. 158/3901), 305, 306,...
€7,00 €5,79
Brake pad set foot brake 90 x 15 x 71 mm for cardan shaft
To fit as: Case IH C 55, 64, 70 More
To fit as: Case IH C 55, 64, 70
€34,25 €28,31
Stabilus Gas strut door-, for- or rear window 150 N, 500 mm, stroke 200 mm
Stabilus
To fit as: Fendt Door window, windscreen or rear screen More
To fit as: Fendt Door window, windscreen or rear screen
€31,60 €26,12
FTE Clutch master cylinder Ø 22,2 mm, mineral oil, gray cast iron Fendt
FTE
Medium: Mineral oil | Material: Grey cast iron | Hole Ø (mm): 22.2 More
Medium: Mineral oil | Material: Grey cast iron | Hole Ø (mm): 22.2
€322,69 €266,69 €293,75 €242,77
You save 9%
Internal plate PTO shaft 3 mm, 80,5 mm, 140 mm Fendt
Version: thickness = 3 mm inner = 80,5 mm outer = 140 mm More
Version: thickness = 3 mm inner = 80,5 mm outer = 140 mm
€38,61 €31,91 €35,15 €29,05
You save 9%
Lip ring vane connection 40 x 51 x 2,5 mm Fendt, Massey Ferguson
Dimensions (mm): 40x51x2.5 More
Dimensions (mm): 40x51x2.5
€19,00 €15,70
External plate 3,5 mm, inner 115 mm, outer 181 mm Fendt
Version: Thickness: 3.5 mm Inner: 115 mm Outer: 181 mm More
Version: Thickness: 3.5 mm Inner: 115 mm Outer: 181 mm
€23,55 €19,46
Interval relays windshield wiser 12 V, 5 A, 6-pin blade terminal Fendt
Connection type: Blade terminal | Nominal voltage (V): 12 | Current (A): 5 | Number of pins: 6 More
Connection type: Blade terminal | Nominal voltage (V): 12 | Current (A...
€46,00 €38,02
Alternator 14 V / 120 A, flange 56 mm
Additional information: With W connection | Nominal values (V / A): 14 / 120 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8,2 / 85,0 | Pulley... More
Additional information: With W connection | Nominal values (V / A): 14...
€185,68 €153,45 €169,00 €139,67
You save 9%
Cover drive shaft Fendt
€38,22 €31,59 €34,75 €28,72
You save 9%
Stop ring drive shaft Fendt
Seal kit for 4WD Fendt
€189,38 €156,51 €172,40 €142,48
You save 9%
Ball joint 337,5 mm, C M22 x 1,5, D M22 x 1,5, taper 24,6 - 28,5 mm
A: 337,5 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 337,5 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24,6 mm. F: 28,5 mm....
€306,10 €252,98 €278,65 €230,29
You save 9%
Tie rod 380 mm, M22 x 1,5, M22 x 1,5, taper 24,6 - 28,5 mm
A: 380 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 380 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€247,30 €204,38 €225,10 €186,03
You save 9%
Ball joint 385 mm, M18 x 1,5, M22 x 1,5, taper 19,9 - 22,3 mm
A: 385 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. Taper: 19,9 - 22,3 mm. More
A: 385 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 19,9 mm. F: 22,3 mm. T...
€108,04 €89,29 €98,35 €81,28
You save 9%
Reservoir brake cylinder Ø 74 mm, 0,08 l Fendt
Medium: DOT4. D: 74 mm. h: 72 mm. Nominal volume: 0,08 l. Fig.: A. H: 126 mm. More
Medium: DOT4. D: 74 mm. h: 72 mm. Nominal volume: 0,08 l. Fig.: A. H: ...
€70,54 €58,30 €64,20 €53,06
You save 9%
Dust cap wheel brake cylinder DOT4 Fendt
€3,73 €3,08
Oil seal rear axle shaft inner 60 x 95 x 14 mm Fendt
Dimensions: 60 x 95 x 14 mm. More
Dimensions: 60 x 95 x 14 mm.
€149,22 €123,32 €135,85 €112,27
You save 9%
Brake hose master brake cylinder outer-Ø 13 mm, inner-Ø 7 mm, 200 mm
Outer Ø: 13 mm. Inner Ø: 7 mm. Length: 200 mm. More
Outer Ø: 13 mm. Inner Ø: 7 mm. Length: 200 mm.
€24,70 €20,41
Ratchet rod hand brake lever Fendt Farmer 303-312, Favorit 509-515
Brake disc Ø 260 mm, thickness 40 mm, 6 hole Fendt
€500,89 €413,96 €456,00 €376,86
You save 9%
Gaiter gear lever Fendt
€43,80 €36,20 €39,85 €32,93
You save 9%
Walterscheid Ball hitch flange ball 80, 140 x 80 mm, 82,4 kN, M17, black
Walterscheid
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-value: 82,4 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Description: The dim... More
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-va...
€1.742,44 €1.440,03 €1.377,55 €1.138,47
You save 21%
Sleeve support push rod 16,4 x 32 mm, width 25 mm Fendt
Dimensions (mm): Inner Ø = 16.4. Outer Ø = 35. Width = 25. More
Dimensions (mm): Inner Ø = 16.4. Outer Ø = 35. Width = 25.
€8,60 €7,11
Pin stabilizer lower 20 x 110 mm Fendt
Dimensions (mm): 20 x 110. More
Dimensions (mm): 20 x 110.
€29,55 €24,42
Set of parts
To fit as Fendt. More
To fit as Fendt.
€67,41 €55,71 €61,35 €50,70
You save 9%
Disc
To fit as Fendt. More
To fit as Fendt.
€3,84 €3,17
KS Connecting rod bearing Ø 63 mm, width 27 mm
€64,09 €52,97 €58,30 €48,18
You save 9%
Borg Warner Fan clutch Fendt Farmer 308-312, Favorit 509-512
€351,19 €290,24 €295,40 €244,13
You save 16%
Oil drain valve thread 1/2 inch - 14 BSP Fendt
Thread: 1/2" - 14 BSP. More
Thread: 1/2" - 14 BSP.
€68,16 €56,33 €62,00 €51,24
You save 9%
Push rod Fendt, Case IH, Steyr
Menke no.: 210255. More
Menke no.: 210255.
€52,59 €43,46 €47,85 €39,55
You save 9%
Showing 289 - 336 of 690

Fendt Favorit 509 (Typ 509) specs

The Fendt Favorit 509 C is the entry-level model of the Favorit 500C series, which Fendt introduced in the autumn of 1993. The names Favorit 509 (Typ 509) and Favorit 509C (Typ 509) refer to the same model. The tractor was built from 1994 to 2000, with a total of 1,490 units produced during that period. Despite being the smallest model in the series, its technical specification closely matched that of the much heavier Fendt 800 series. The 509 C was designed as a versatile tractor suitable for ploughing, harvesting, loading and transport work.

Engine and power

Under the hood sits an MWM four-cylinder turbodiesel, type TD 226 B-4, with a displacement of 4,156 cc. Engine output is 95 hp (70.8 kW) at 2,100 rpm. Maximum torque is 381 Nm at 1,500 rpm. Fuel delivery is handled by a Bosch VE distributor pump with automatic advance and multi-hole injectors. Maximum injection pressure is 850 bar. Further features include overhead valves, pressure lubrication, piston crown cooling and a gear-driven camshaft. Cooling is handled by a thermostatically controlled dual-circuit system with a viscous fan coupling and exhaust turbocharger. The constant power range runs between 1,900 and 2,400 rpm, and an oil change is only required after 500 operating hours. The fuel tank holds 135 litres.

Transmission

The 509 C uses a ZF 7200 Turboshift gearbox, a fully synchronised unit with four-speed powershift and electro-hydraulic reverser operated by a single lever. The gearbox offers 44 forward and 44 reverse gears, consisting of 24 working gears and 20 creep gears. A notable feature is the Voith fluid coupling (type 390 TD-F), positioned ahead of the wet multi-disc clutch. This hydraulic coupling smooths out power delivery and protects the drivetrain from shock loads. Direction changes can be made without depressing the clutch, thanks to the synchronised reverser with preselect function. Standard top speed is 40 km/h, with an optional increase to 50 km/h.

Hydraulics and PTO

  • Hydraulic pump: closed system with a flow rate of 101.8 litres per minute
  • Rear three-point hitch lift capacity: 5,508 kg (category II/III)
  • Control: lower-link draft sensing
  • Rear PTO: independent, electro-hydraulic, 540/750/1000/1400 rpm
  • Front PTO: independent, optional, 1000 rpm
  • Front and rear differential lock: electro-hydraulic

Dimensions, weight and tyres

The operating weight of the tractor is 4,970 kg. Wheelbase is 233 cm. Standard tyre sizes are 420/70R24 front and 480/70R38 rear, though 18.4 R38 rear was also used. The electrical system runs on 12 volts with a 110 Ah battery and alternator charging.

Cab

The cab of the 509 C was at launch nearly identical to that of the Farmer 300 series, with a noise level of 72 dB(A). In 1995 the cab comfort was upgraded. Heating was standard, air conditioning was optional. The cab was fitted with a sprung suspension mounting.

Parts and brands for the Fendt Favorit 509 C

We supply parts for the Fendt Favorit 509 C, for both routine maintenance and full restoration. This covers engine parts, cooling components, exhaust systems, fuel filters, hydraulic components, brakes, electrics and cab parts. The parts we supply come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart