Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Fendt Favorit 610 / 610S / 610 LS / 610 LSA parts

Do you need parts for your Fendt Favorit 610, 610 S, 610 LS or 610 LSA? In this category you’ll find all parts that fit these models from the Fendt Favorit series.

505 parts found for Fendt Favorit 610 (Typ 281)
Show:
Glow plug 9,5 V, 10 A, M14 x 1,25, pin 25 mm, total 102 mm
9%
Glow plug 9,5 V, 10 A, M14 x 1,25, pin 25 mm, total 102 mm
Version: 9.5 V, 10 A, thread M14 x 1.25, length of rod = 25 mm, total length = 1...
€76,77 €63,45 €69,85 €57,73
 
Flame glow plug 9,5 V, 20 A, M20 x 1,5 Fendt
9%
Flame glow plug 9,5 V, 20 A, M20 x 1,5 Fendt
Version: 9.5 V, 20 A, Thread M20 x 1.5. To fit: Fendt.
€81,93 €67,71 €74,55 €61,61
 
Main bearing standard Ø 70 mm Fendt, Renault
9%
Main bearing standard Ø 70 mm Fendt, Renault
Dimensions: Ø 70 mm.
€35,72 €29,52 €32,50 €26,86
 
Outlet valve Fendt
Outlet valve Fendt
€24,65 €20,37
 
Repair set feed pump Fendt
Repair set feed pump Fendt
€29,55 €24,42
 
Hose air filter Ø 100 mm, 75 mm Fendt Favorit 600-615
9%
Hose air filter Ø 100 mm, 75 mm Fendt Favorit 600-615
Inner Ø: 100 mm. Length: 75 mm.
€110,15 €91,03 €100,25 €82,85
 
Ring exhaust manifold Fendt Farmer 311, Favorit 600-615
9%
Ring exhaust manifold Fendt Farmer 311, Favorit 600-615
€112,39 €92,88 €102,30 €84,55
 
Gasket exhaust Fendt Favorit 600-615
Gasket exhaust Fendt Favorit 600-615
€21,25 €17,56
 
Crankshaft, 6-cylinder forged Fendt Farmer 311, 312, Favorit 511-615
9%
Crankshaft, 6-cylinder forged Fendt Farmer 311, 312, Favorit 511-615
Notes: Please follow the instructions in the installation guide. Please complete...
€2.218,73 €1.833,66 €2.019,90 €1.669,34
 
Crankshaft seal rear outer-Ø 130 mm, inner-Ø 110 mm, width 13 mm
Crankshaft seal rear outer-Ø 130 mm, inner-Ø 110 mm, width 13 mm
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm.
€25,25 €20,87
 
Piston, complete Fendt
9%
Piston, complete Fendt
Menke no.: 53212.
€146,34 €120,94 €133,20 €110,08
 
Return line Fendt Farmer 311, Favorit 600-615
9%
Return line Fendt Farmer 311, Favorit 600-615
€240,92 €199,11 €219,30 €181,24
 
Bolt set 3de steering valve 3x M8 x 230 Fendt, Case IH, Steyr, Schlüter
9%
Bolt set 3de steering valve 3x M8 x 230 Fendt, Case IH, Steyr, Schlüter
Technical data: 3x M8 x 230.
€56,60 €46,78 €51,50 €42,56
 
Bolt set 4de steering valve 3x M8 x 280
9%
Bolt set 4de steering valve 3x M8 x 280
Technical data: 3x M8 x 280.
€67,87 €56,09 €61,75 €51,03
 
Cover hydraulic pump Fendt
9%
Cover hydraulic pump Fendt
€657,52 €543,41 €598,60 €494,71
 
Single hydraulic pump 16,8 cm³/rpm., taper 1:5 Ø 17 x 17, left
9%
Single hydraulic pump 16,8 cm³/rpm., taper 1:5 Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 59 mm. B: 107,...
€198,99 €164,45 €181,15 €149,71
 
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
9%
Bosch/Rexroth
Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure ...
€643,00 €531,41 €585,35 €483,76
 
Door handle, left, inner Fendt Favorit 600 (Typ 280) - 615 (Typ 285)
9%
Door handle, left, inner Fendt Favorit 600 (Typ 280) - 615 (Typ 285)
€54,65 €45,17 €49,75 €41,12
 
Guide ring Fendt
Guide ring Fendt
€18,70 €15,45
 
Adjusting nut for lower link strut M27 x 3 Fendt
9%
Adjusting nut for lower link strut M27 x 3 Fendt
Dimensions: Thread = M27 x 3 mm.
€58,94 €48,71 €53,65 €44,34
 
Gas strut roof window 120 N, 225 mm Fendt Farmer 240 S (Typ 294), GT 395
Gas strut roof window 120 N, 225 mm Fendt Farmer 240 S (Typ 294), GT 395
Newtons: 120. A: 225 mm. B: 130 mm. C: 6 mm. D: 6 mm. To fit: roof hatch. Form: ...
€29,90 €24,71
 
Gas strut door 100 N, 500 mm Fendt
Gas strut door 100 N, 500 mm Fendt
suitable for: Tür. Newtons: 100. A: 500 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form:...
€30,75 €25,41
 
Mirror 260 x 148 mm, unheated, right / left, rod-Ø 13 mm
9%
Mirror 260 x 148 mm, unheated, right / left, rod-Ø 13 mm
Dimensions: 260 x 148 mm. Height: 260 mm. Width: 148 mm. Radius of curvature: 14...
€104,95 €86,74 €95,55 €78,97
 
Mud flap rubber 200 x 150 x 3 mm Fendt
Mud flap rubber 200 x 150 x 3 mm Fendt
Version: 200 x 150 x 3mm, rubber.
€25,25 €20,87
 
Pin for top link 25,4 x 140 mm Fendt
9%
Pin for top link 25,4 x 140 mm Fendt
Dimensions: 25.4 x 140 mm.
€49,03 €40,52 €44,60 €36,86
 
Oil pressure switch M10 x 1 conical, 6,3 mm, 12 V, 0,4 - 0,7 bar
Oil pressure switch M10 x 1 conical, 6,3 mm, 12 V, 0,4 - 0,7 bar
Version: Thread: M10 x 1, tapered, Blade terminal 6.3 mm, DIN 158, AF 24, switch...
€15,65 €12,93
 
Brake light switch oil pressure two-chamber system M10 x 1, wrench size 22
Brake light switch oil pressure two-chamber system M10 x 1, wrench size 22
Version: Two-chamber system, make contact, 3 - 6 bar, connection thread M10 x 1,...
€24,00 €19,83
 
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
9%
Work lamp flood beam H3, 55 W, 12 V, 150 x 98 x 89 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€55,15 €45,58 €50,20 €41,49
 
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 154 x 128 x 77 mm
4%
HELLA
Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 154 x 128 x 77 mm
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions...
€44,82 €37,04 €43,16 €35,67
 
Oil pressure warning switch M10 x 1 conical short DIN 158, 0,5 - 0,8 bar
Oil pressure warning switch M10 x 1 conical short DIN 158, 0,5 - 0,8 bar
Version: Thread: M10 x 1 (tapered, short) DIN 158, Switching pressure: 0.5 - 0.8...
€13,30 €10,99
 
Oil pressure switch engine open function (NO) M10 x 1, 0,3 - 0,6 bar
9%
Oil pressure switch engine open function (NO) M10 x 1, 0,3 - 0,6 bar
Version: Thread: M10 x 1 tapered, short, Switching pressure: 0.3-0.6 bar, Blade ...
€69,70 €57,60 €63,45 €52,44
 
HELLA Glass rear light right, 3 light functions, lamp P21W, R10W
HELLA
Glass rear light right, 3 light functions, lamp P21W, R10W
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850V, 1140F, ...
€24,50 €20,25
 
Water pump with gasket Fendt 103 (Typ 138) - 615 (Typ 285)
9%
Water pump with gasket Fendt 103 (Typ 138) - 615 (Typ 285)
To fit as: Fendt Farmer 2, 102S, 103S, 104S, 105S, 106S, 108S, 303LS, 304LS, Far...
€70,35 €58,14 €64,00 €52,89
 
Set of parts filter glass Ø 29/35 x 53 mm
Set of parts filter glass Ø 29/35 x 53 mm
Ø: 29/35 mm. Height: 33 mm.
€12,95 €10,70
 
Repair set clutch cylinder with piston Fendt Favorit 600 - 615
9%
Repair set clutch cylinder with piston Fendt Favorit 600 - 615
Additional information: with piston | Menke no.: 209836
€71,54 €59,12 €65,10 €53,80
 
Repair set clutch cylinder with piston Fendt Farmer 303 - 309
9%
Repair set clutch cylinder with piston Fendt Farmer 303 - 309
Menke no.: 209829 | Additional information: with piston
€138,83 €114,74 €126,35 €104,42
 
Single clutch G 310 flywheel 36 mm Fendt, Steyr
9%
Single clutch G 310 flywheel 36 mm Fendt, Steyr
Flywheel dimension (mm): 36 | Additional information: Made in Germany
€636,05 €525,66 €579,00 €478,51
 
Thrust bearing driving clutch 57 x 100 x 55,5 mm Fendt Farmer 2 - 312
9%
Thrust bearing driving clutch 57 x 100 x 55,5 mm Fendt Farmer 2 - 312
Dimensions (mm): 57 x 100 x 55.5
€188,64 €155,90 €171,70 €141,90
 
Showing 289 - 336 of 505

Fendt Favorit 610 (Typ 281) specifications

The Fendt Favorit 610 LS carries the internal type designation FW 281 and was built from 1978 to 1984. A total of 2,177 units were produced, of which 301 had rear-wheel drive (chassis number T 281.012) and 1,876 had four-wheel drive (chassis number T 281.212). The predecessor was the Favorit 610 S, built from 1972 to 1976. Compared to the intermediate SL version, the LS models brought larger tyres, a power increase of 5 hp and an improved cab noise level of 81 dB.

The type designation FW 281 applies to both the SL and the LS version, which means it is advisable to use the chassis number as a starting point when sourcing parts.

Engine

The Favorit 610 LS is fitted with an MWM D 227-6.2, a water-cooled six-cylinder four-stroke inline diesel engine without turbocharger and with direct injection. The engine features overhead valves, pressure circulation lubrication, a seven-bearing crankshaft, a gear-driven camshaft, a dry air filter, an inline injection pump with governor, a multi-hole injector and thermostatically controlled dual-circuit cooling with a flat-fin radiator. The governed speed range runs from 650 to 2,450 rpm and minimum oil pressure at rated speed is 2.0 bar.

Power output is 95 hp. Maximum torque is 352 Nm at 1,450 rpm.

Clutch and transmission

The drive clutch is a hydraulically operated self-adjusting dry clutch type Fichtel & Sachs G 310 K. The torque converter is a pre-mounted hydraulic fluid coupling type Voith 422 TD-F3. The PTO clutch is a dry multi-disc clutch, independent of the drive clutch. The gearbox is a helical-cut ZF group fine-step gearbox type T 3312 with side-mounted gear selection, with a top speed of 30 km/h in the basic version. Optional creep gears and super creep gears were available.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Hydraulics and lift system

The hydraulic pump delivers 40 litres per minute. The rear three-point hitch is category III with quick coupler and is fitted with draft, position and mixed control. An optional front linkage is available.

Brakes, front axle and steering

The brakes are hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. On the four-wheel drive version, a front wheel disc brake acts on the drive; when the individual wheel brake is applied, the front wheel brake disengages automatically. The front axle is a power-shift ZF steering-drive planetary oscillating axle type APL-3052 with lateral propshaft. An optional single or dual-circuit compressed air braking system is available. Steering is hydrostatically assisted.

Cab, dimensions and weight

The cab is a rubber-mounted, vibration and sound-insulated safety cab with a glass area of 4.7 m² and a noise level of 81 dB. Standard equipment includes fold-open front and rear windows, analogue instruments, a height, fore-aft and tilt-adjustable seat with armrests, interior lighting, windscreen washer system, two-stage heating, three-stage ventilation system, radio preparation, sun visor and height-adjustable steering wheel. An optional low cab, air conditioning, tinted windows and a spotlight were available.

  • Fuel tank: 222 litres

Standard tyre sizes are 14.9-26 at the front and 18.4R38 at the rear.

Difference from the 610 SL (Typ 281 SL)

The Favorit 610 LS is the smallest tractor in the 600 series and the only model in that series without an MWM D 226 engine. The 610 LS has an MWM D 227, a slightly smaller engine type than the D 226 used in the 611 and above. At 95 hp, the 610 LS is the least powerful model in the LS series; the 611 LS starts at 100 hp. Compared to the SL predecessor, the LS version brought a new, larger cab with better sound insulation, larger tyres and 5 hp more power. Parts from the 610 LS and the 610 SL overlap partially, but when in doubt it is always advisable to check the chassis number given that both share the type designation FW 281.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart