Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Fendt Favorit 610 / 610S / 610 LS / 610 LSA parts

Do you need parts for your Fendt Favorit 610, 610 S, 610 LS or 610 LSA? In this category you’ll find all parts that fit these models from the Fendt Favorit series.

505 parts found for Fendt Favorit 610 (Typ 281)
Show:
ZF Oil seal 50 x 80 x 10,5 mm ZF front axle 4475005103
9%
ZF
Oil seal 50 x 80 x 10,5 mm ZF front axle 4475005103
€101,64 €84,00 €92,50 €76,45
 
ZF Universal joint 30 x 79,5 mm, maintenance-free
9%
ZF
Universal joint 30 x 79,5 mm, maintenance-free
€304,55 €251,69 €277,25 €229,13
 
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 ...
€36,65 €30,29
 
Universal joint 30 x 96 mm, bush lubrication
9%
Universal joint 30 x 96 mm, bush lubrication
A: 30 mm. B: 96 mm. Universal joint size: . Lubrication system: Bush lubrication...
€519,45 €429,30 €472,90 €390,83
 
Repair set clutch cylinder DOT4 Fendt
9%
Repair set clutch cylinder DOT4 Fendt
Medium: DOT4. Additional information: Without piston.
€34,23 €28,29 €31,15 €25,74
 
Wheel brake cylinder Ø 22,2 mm, pin without slot, DOT4 Case IH, Fendt
9%
Wheel brake cylinder Ø 22,2 mm, pin without slot, DOT4 Case IH, Fendt
Medium: DOT4. Hole Ø: 22.2 mm.
€165,76 €136,99 €150,90 €124,71
 
Wabco Connector head red supply line M16 x 1,5, vehicle
Wabco
Connector head red supply line M16 x 1,5, vehicle
Version: Red, supply line. Connection: M16 x 1.5. Operating pressure max.: 10.0 ...
€29,10 €24,05
 
LUK Pilot bearing 40 x 68 x 15 mm
2%
LUK
Pilot bearing 40 x 68 x 15 mm
Dimensions: 40 x 68 x 15 mm.
€70,71 €58,44 €69,15 €57,15
 
Clevis hand brake Fendt
Clevis hand brake Fendt
€13,00 €10,74
 
Gaiter hand brake lever Fendt
Gaiter hand brake lever Fendt
€72,00 €59,50
 
Ratchet pawl hand brake lever Fendt
9%
Ratchet pawl hand brake lever Fendt
€64,14 €53,01 €58,35 €48,22
 
Brake caliper for brake disc 13 mm, incl. brake pads, DOT 4 Fendt
9%
Brake caliper for brake disc 13 mm, incl. brake pads, DOT 4 Fendt
€746,14 €616,64 €679,25 €561,36
 
Repair set foot brake Fendt
9%
Repair set foot brake Fendt
€38,81 €32,07 €35,30 €29,17
 
Seal 0,3 mm Fendt
Seal 0,3 mm Fendt
Thickness: 0,3 mm. Description: Does not fit GT 231.
€5,00 €4,13
 
Differential seal inner Ø 65 x 85 x 13/9,5 mm Fendt
9%
Differential seal inner Ø 65 x 85 x 13/9,5 mm Fendt
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 65 mm. Height 1: 13 mm.
€42,11 €34,80 €38,30 €31,65
 
Bush rear axle outer Fendt Favorit 610, 611
9%
Bush rear axle outer Fendt Favorit 610, 611
€463,53 €383,08 €421,95 €348,72
 
Rear axle shaft seal outer Ø 102 x 152 x 18,5/25 mm Fendt
9%
Rear axle shaft seal outer Ø 102 x 152 x 18,5/25 mm Fendt
€207,36 €171,37 €188,75 €155,99
 
Starter ring gear Ø 350/316 mm, 115 teeth Fendt
9%
Starter ring gear Ø 350/316 mm, 115 teeth Fendt
Version: Ø 350/316 mm, 115 splines.
€514,17 €424,93 €468,10 €386,86
 
KS Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD226-6
9%
KS
Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD226-6
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€115,18 €95,19 €104,85 €86,65
 
VICTOR REINZ Crankshaft seal for Fendt, Deutz-Fahr
9%
VICTOR REINZ
Crankshaft seal for Fendt, Deutz-Fahr
€67,80 €56,03 €61,70 €50,99
 
VICTOR REINZ Cylinder head gasket set ZKD 1,5 mm engine D226-3 - D226-6 Fendt
9%
VICTOR REINZ
Cylinder head gasket set ZKD 1,5 mm engine D226-3 - D226-6 Fendt
€47,05 €38,88 €42,80 €35,37
 
Insulating plate exhaust Fendt Favorit 600-612
9%
Insulating plate exhaust Fendt Favorit 600-612
€106,33 €87,88 €96,75 €79,96
 
KS Piston set complete Ø 105 mm, piston pin 32 x 82 mm, Fendt
9%
KS
Piston set complete Ø 105 mm, piston pin 32 x 82 mm, Fendt
€426,93 €352,83 €388,65 €321,20
 
Rubber elbow to heating fan Ø 15 mm Fendt
Rubber elbow to heating fan Ø 15 mm Fendt
Inner Ø: 15 mm.
€29,65 €24,50
 
V-belt Fendt Favorit 600-612
V-belt Fendt Favorit 600-612
€13,95 €11,53
 
Radiator hose cylinder head and air compressor inner-Ø 22 mm, 1000 mm
9%
Radiator hose cylinder head and air compressor inner-Ø 22 mm, 1000 mm
Inner Ø: 22 mm. Length: 1000 mm.
€45,33 €37,46 €41,25 €34,09
 
Gasket rear crankshaft cover Fendt
Gasket rear crankshaft cover Fendt
€37,95 €31,36
 
Disc crankshaft standard Ø 70 mm Renault, Fendt
Disc crankshaft standard Ø 70 mm Renault, Fendt
Dimensions: Ø 70 mm.
€38,40 €31,74
 
Main bearing standard Ø 65 mm Fendt
9%
Main bearing standard Ø 65 mm Fendt
Dimensions: Ø 65 mm.
€61,19 €50,57 €55,70 €46,03
 
Connecting rod bush Ø 35 mm Fendt
Connecting rod bush Ø 35 mm Fendt
Dimensions: 35 mm.
€25,70 €21,24
 
Connecting rod bearing standard, Ø 58 mm Fendt
Connecting rod bearing standard, Ø 58 mm Fendt
Dimensions: Ø 58 mm.
€26,80 €22,15
 
Injection nozzle Fendt Farmer 102-311, Favorit 611, GT 231
9%
Injection nozzle Fendt Farmer 102-311, Favorit 611, GT 231
Type formula: DLLB150S821, 0433271846. Bosch no.: 2580433271846.
€39,20 €32,40 €35,65 €29,46
 
Collar bush speed adjustment Ø 12 / 18 / 22 mm, 2,5 / 5,5 mm Fendt
Collar bush speed adjustment Ø 12 / 18 / 22 mm, 2,5 / 5,5 mm Fendt
Ø: 12 / 18 / 22 mm. Length: 2,5 / 5,5 mm.
€6,65 €5,50
 
Oil drain valve thread 1/2 inch - 20UNF Fendt, Massey Ferguson
9%
Oil drain valve thread 1/2 inch - 20UNF Fendt, Massey Ferguson
Thread: 1/2" - 20UNF.
€68,16 €56,33 €62,00 €51,24
 
Valve seat ring inlet Fendt
Valve seat ring inlet Fendt
€32,75 €27,07
 
Cylinder head bolt 14 x 120 mm Renault, Fendt
9%
Cylinder head bolt 14 x 120 mm Renault, Fendt
Dimensions: M14 x 120 mm.
€63,12 €52,17 €57,45 €47,48
 
Showing 337 - 384 of 505

Fendt Favorit 610 (Typ 281) specifications

The Fendt Favorit 610 LS carries the internal type designation FW 281 and was built from 1978 to 1984. A total of 2,177 units were produced, of which 301 had rear-wheel drive (chassis number T 281.012) and 1,876 had four-wheel drive (chassis number T 281.212). The predecessor was the Favorit 610 S, built from 1972 to 1976. Compared to the intermediate SL version, the LS models brought larger tyres, a power increase of 5 hp and an improved cab noise level of 81 dB.

The type designation FW 281 applies to both the SL and the LS version, which means it is advisable to use the chassis number as a starting point when sourcing parts.

Engine

The Favorit 610 LS is fitted with an MWM D 227-6.2, a water-cooled six-cylinder four-stroke inline diesel engine without turbocharger and with direct injection. The engine features overhead valves, pressure circulation lubrication, a seven-bearing crankshaft, a gear-driven camshaft, a dry air filter, an inline injection pump with governor, a multi-hole injector and thermostatically controlled dual-circuit cooling with a flat-fin radiator. The governed speed range runs from 650 to 2,450 rpm and minimum oil pressure at rated speed is 2.0 bar.

Power output is 95 hp. Maximum torque is 352 Nm at 1,450 rpm.

Clutch and transmission

The drive clutch is a hydraulically operated self-adjusting dry clutch type Fichtel & Sachs G 310 K. The torque converter is a pre-mounted hydraulic fluid coupling type Voith 422 TD-F3. The PTO clutch is a dry multi-disc clutch, independent of the drive clutch. The gearbox is a helical-cut ZF group fine-step gearbox type T 3312 with side-mounted gear selection, with a top speed of 30 km/h in the basic version. Optional creep gears and super creep gears were available.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Hydraulics and lift system

The hydraulic pump delivers 40 litres per minute. The rear three-point hitch is category III with quick coupler and is fitted with draft, position and mixed control. An optional front linkage is available.

Brakes, front axle and steering

The brakes are hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. On the four-wheel drive version, a front wheel disc brake acts on the drive; when the individual wheel brake is applied, the front wheel brake disengages automatically. The front axle is a power-shift ZF steering-drive planetary oscillating axle type APL-3052 with lateral propshaft. An optional single or dual-circuit compressed air braking system is available. Steering is hydrostatically assisted.

Cab, dimensions and weight

The cab is a rubber-mounted, vibration and sound-insulated safety cab with a glass area of 4.7 m² and a noise level of 81 dB. Standard equipment includes fold-open front and rear windows, analogue instruments, a height, fore-aft and tilt-adjustable seat with armrests, interior lighting, windscreen washer system, two-stage heating, three-stage ventilation system, radio preparation, sun visor and height-adjustable steering wheel. An optional low cab, air conditioning, tinted windows and a spotlight were available.

  • Fuel tank: 222 litres

Standard tyre sizes are 14.9-26 at the front and 18.4R38 at the rear.

Difference from the 610 SL (Typ 281 SL)

The Favorit 610 LS is the smallest tractor in the 600 series and the only model in that series without an MWM D 226 engine. The 610 LS has an MWM D 227, a slightly smaller engine type than the D 226 used in the 611 and above. At 95 hp, the 610 LS is the least powerful model in the LS series; the 611 LS starts at 100 hp. Compared to the SL predecessor, the LS version brought a new, larger cab with better sound insulation, larger tyres and 5 hp more power. Parts from the 610 LS and the 610 SL overlap partially, but when in doubt it is always advisable to check the chassis number given that both share the type designation FW 281.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart