Menu
EUR

Fendt Favorit 611 (Typ 382) parts

Looking for parts for your Fendt Favorit 611 (Typ 382) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

568 parts found for Fendt Favorit 611 (Typ 382)
Show:
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
4%
Wabco
Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylinder capaci...
€2.045,95 €1.690,87 €1.960,65 €1.620,38
 
Clutch plate 350 41 x 45, 22 splines sintered Fendt Favorit 611 - 615
8%
Clutch plate 350 41 x 45, 22 splines sintered Fendt Favorit 611 - 615
Material specifications: Sintered clutch lining | Additional information: Made i...
€492,81 €407,28 €453,39 €374,70
 
HELLA Alternator 14 V, 120 A, without belt pulley
23%
HELLA
Alternator 14 V, 120 A, without belt pulley
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (...
€553,58 €457,50 €426,53 €352,50
 
FEBI Air filter C15165/3, AF4135
55%
FEBI
Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
 
Pull handle Fendt Farmer 5S, 105, 106, 108
8%
Pull handle Fendt Farmer 5S, 105, 106, 108
€62,83 €51,93 €57,80 €47,77
 
ROCKINGER Drawbar K80 rail width 311 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 311 mm, locking pin Ø 22 mm
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.397,74 €1.155,16 €1.076,93 €890,03
 
HELLA Work lamp flood beam H3, 12 / 24 V, 35 / 70 W, square, mounting, bolted
4%
HELLA
Work lamp flood beam H3, 12 / 24 V, 35 / 70 W, square, mounting, bolted
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: • Housing: pl...
€56,69 €46,85 €54,59 €45,12
 
HELLA Rear light right 158 x 64 x 51 mm, 12 V Fendt, John Deere, Kubota
HELLA
Rear light right 158 x 64 x 51 mm, 12 V Fendt, John Deere, Kubota
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S, 303, 304...
€29,40 €24,30
 
Gearshift pattern Fendt Farmer 4S, 5S, Favorit 600-615
Gearshift pattern Fendt Farmer 4S, 5S, Favorit 600-615
To fit as: Fendt Farmer 4S, 5S, 102, 103, 104, 105, 106, 108, 240, 250, 260, 270...
€9,91 €8,19
 
Bosch/Rexroth Hydraulic pump 19 cm³, serrated as B 17 x 14, 9 splines, left, Fendt
8%
Bosch/Rexroth
Hydraulic pump 19 cm³, serrated as B 17 x 14, 9 splines, left, Fendt
Drive shaft: Splined shaft B 17 x 14 Z9 | Bosch no.: 1517222721 | Direction of r...
€599,88 €495,77 €551,89 €456,11
 
Wabco Overflow valve 6 bar, M22 x 1,5 Fendt Farmer, Favorit
8%
Wabco
Overflow valve 6 bar, M22 x 1,5 Fendt Farmer, Favorit
Connection: M22 x 1.5 | Working pressure (bar): 13 | Overflow pressure (bar): 6
€120,58 €99,65 €110,93 €91,68
 
Clutch slave cylinder Ø 38,1 mm, DOT 4 Fendt Favorit 611 - 615
8%
Clutch slave cylinder Ø 38,1 mm, DOT 4 Fendt Favorit 611 - 615
Hole Ø (mm): 38.1 | Menke no.: 73708
€127,96 €105,75 €117,72 €97,29
 
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
8%
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
Additional information: With W connection | Charging current (A): 65 | Belt widt...
€144,18 €119,16 €132,65 €109,62
 
Elring Cylinder head gasket 1,4 mm engine D226
Elring
Cylinder head gasket 1,4 mm engine D226
Thickness (mm): 1,4
€28,05 €23,18
 
Elring Gasket set 1,15 mm thick engine MWM D 226 Fendt, Renault
8%
Elring
Gasket set 1,15 mm thick engine MWM D 226 Fendt, Renault
€53,81 €44,47 €49,51 €40,91
 
Radiator hose inner-Ø 8 mm, 500 mm, thickness 3,5 mm Fendt
Radiator hose inner-Ø 8 mm, 500 mm, thickness 3,5 mm Fendt
Material thickness (mm): 3,5 | Inner Ø (mm): 8 | Length (mm): 500
€27,76 €22,94
 
HELLA Alternator 14 V / 65 A, pulley Ø 73 mm, 1 groove, Case IH, Fendt
23%
HELLA
Alternator 14 V / 65 A, pulley Ø 73 mm, 1 groove, Case IH, Fendt
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current (A): 65 |...
€371,33 €306,88 €286,10 €236,44
 
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, clockwise
40%
MAHLE
Gear reduction starter 12 V, 3,2 kW, 9 teeth, clockwise
€516,56 €426,91 €309,38 €255,69
 
GRAMMER Air-sprung tractor seat fabric Maximo Dynamic DDS MSG95AL/741
GRAMMER
Air-sprung tractor seat fabric Maximo Dynamic DDS MSG95AL/741
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery type: Fabric....
€3.648,07 €3.014,94
 
Turbocharger Fendt Farmer 312, Favorit 512-515, 611-615
4%
Turbocharger Fendt Farmer 312, Favorit 512-515, 611-615
€1.903,02 €1.572,74 €1.823,68 €1.507,18
 
Bosch/Rexroth Hydraulic pump anticlockwise 19 cm³/rpm., taper 1:5, Ø 17 x 17
8%
Bosch/Rexroth
Hydraulic pump anticlockwise 19 cm³/rpm., taper 1:5, Ø 17 x 17
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of rotati...
€1.196,85 €989,13 €1.101,10 €910,00
 
LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
8%
LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x ...
€72,92 €60,26 €67,09 €55,44
 
Replacement key plastic-coated black, lock number 14607
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,59 €6,27
 
Drive shaft 1710 mm Fendt Favorit 611 - 615
8%
Drive shaft 1710 mm Fendt Favorit 611 - 615
Length (mm): 1710
€1.072,65 €886,49 €986,84 €815,57
 
LED work lights round Ø 120 mm floodlight 6800 lm, 60 W
8%
LED work lights round Ø 120 mm floodlight 6800 lm, 60 W
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Voltage range ...
€85,72 €70,84 €78,86 €65,18
 
Wabco Overflow valve 6,5 bar, M22 x 1,5 Fendt Farmer, Favorit
8%
Wabco
Overflow valve 6,5 bar, M22 x 1,5 Fendt Farmer, Favorit
Adjustment range (bar): 5,3 - 7,0 | Opening pressure (bar): 6,5 | Outlet connect...
€131,31 €108,52 €120,81 €99,84
 
Repair set clutch cylinder with piston Fendt
8%
Repair set clutch cylinder with piston Fendt
Additional information: with piston
€85,35 €70,54 €78,52 €64,89
 
Repair set clutch cylinder with piston Fendt Favorit 600 - 615
8%
Repair set clutch cylinder with piston Fendt Favorit 600 - 615
Additional information: with piston | Menke no.: 209836
€71,54 €59,12 €65,82 €54,39
 
Thrust bearing PTO shaft Fendt Farmer 102 - 309
8%
Thrust bearing PTO shaft Fendt Farmer 102 - 309
€151,01 €124,80 €138,93 €114,82
 
Expansion valve 3/8 - 1/2 inch o-ring Fendt, John Deere, Renault
8%
Expansion valve 3/8 - 1/2 inch o-ring Fendt, John Deere, Renault
Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 8, 1/2"" O-ring ...
€90,25 €74,59 €83,03 €68,62
 
Clutch plate 350 41 x 45, 22 splines Fendt Favorit 611 - 615
8%
Clutch plate 350 41 x 45, 22 splines Fendt Favorit 611 - 615
Dimensions (mm): 41 x 45, 22 grooves | Additional information: Made in Germany
€407,96 €337,16 €375,32 €310,18
 
Filter set fuel filter
Filter set fuel filter
€13,58 €11,22
 
Rubber plug brake cylinder DOT4 Fendt Farmer 240-307
Rubber plug brake cylinder DOT4 Fendt Farmer 240-307
Medium: DOT4.
€6,68 €5,52
 
Valve cover Fendt
8%
Valve cover Fendt
€58,35 €48,22 €53,68 €44,37
 
Seal feed pump
Seal feed pump
€2,89 €2,39
 
Force sensor pin 60 kN, 158,1 mm, Ø 36,8 mm Fendt
8%
Force sensor pin 60 kN, 158,1 mm, Ø 36,8 mm Fendt
Dimensions: Length = 158.1, Ø = 36.8 mm.
€795,79 €657,68 €732,13 €605,06
 
ROCKINGER Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
23%
ROCKINGER
Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.385,51 €1.145,05 €1.067,51 €882,24
 
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
23%
ROCKINGER
Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.285,58 €1.062,46 €990,51 €818,61
 
Scharmüller Drawbar frame standard K80 330/25/32 mm, 3000 kg Deutz-Fahr, Fendt
8%
Scharmüller
Drawbar frame standard K80 330/25/32 mm, 3000 kg Deutz-Fahr, Fendt
To fit as: Deutz-Fahr Serie D-06 (10006-12006); Fendt Serie Favorit 600 LS/LSA/S...
€2.419,21 €1.999,35 €2.225,67 €1.839,40
 
Brake light switch mechanical NC-contact, neutral position on
8%
Brake light switch mechanical NC-contact, neutral position on
Version: Break contact, normally on.
€90,91 €75,13 €83,64 €69,12
 
Headlight left / right 12 / 24 V, H4, built-in, 172 x 142 x 77 mm
8%
Headlight left / right 12 / 24 V, H4, built-in, 172 x 142 x 77 mm
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK/T4W. Material: Housin...
€48,86 €40,38 €44,95 €37,15
 
MANN-FILTER Air filter C15165/3, AF4135, inner CF 700
MANN-FILTER
Air filter C15165/3, AF4135, inner CF 700
Suitable secondary element 565CF700
€62,01 €51,25
 
Coupling pin curved Ø 31 mm, 150 mm, 480 mm
8%
Coupling pin curved Ø 31 mm, 150 mm, 480 mm
€38,19 €31,56 €35,13 €29,04
 
Showing 49 - 96 of 568

Fendt Favorit 611 (Typ 382) specifications

The Fendt Favorit 611 LSA carries the internal type designation T 382 and was built from 1985 to 1993 exclusively with four-wheel drive. A total of 1,433 units were produced. The 611 LSA is the successor to the 611 LS (Typ 282) and at the same time the conclusion of a development line that began in 1972 with the Favorit 611 S. The LS version with rear-wheel drive falls under Typ FWA 282.

Production ran in two clearly distinct phases. In the first phase (chassis number T 382.250, 1985 to 1987, 228 units), the engine has no turbocharger and produces 115 hp. In the second phase (chassis number T 382.211, 1988 to 1993, 1,205 units), a turbocharger was added and the combustion process optimised, raising output to 125 hp while fuel consumption fell. The 611 LSA was succeeded in the line-up by the Favorit 500C series.

Hydraulics and lift system

The hydraulic tandem pump delivers 69 litres per minute (44 plus 25 litres) at 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available with a maximum lift capacity of 3,940 kg. The permissible front axle load is 3,050 kg and the rear axle load 5,400 kg. The permissible gross weight is 8,500 kg.

Engine

The second phase (1988 to 1993) uses an MWM TD 226-B 6, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection into the combustion bowl of the piston. The engine is fitted with individually mounted cylinder heads, piston crown cooling, an oil cooler, Rotocap valves, a viscous fan, an inline injection pump, a multi-hole injector, a dry air filter with pre-cleaner, pressure circulation lubrication, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,240 cc. Maximum torque is 497 Nm at 1,500 rpm. Injection pressure is 180 to 185 bar, raised to 650 bar from 1987.

The first phase (1985 to 1987) has a naturally aspirated MWM D 226.6.2 without turbocharger producing 115 hp, with a maximum torque of 412 Nm at 1,500 rpm.

Transmission and travel speed

The 611 LSA has a helical-cut ZF fully synchronised fine-step gearbox type T 3345 with side-mounted gear selection, offering 20 forward and 9 reverse gears. Top speed is 40 km/h in the standard version, with a 30 km/h version also available. In the 40 km/h version, the six gears in the fast range run from 3.88 to 38.41 km/h, in the slow range from 3.12 to 30.94 km/h and in the creep range from 4.71 to 27.41 km/h. From 1987, the Duospeed drive system was available as an option, along with an electronically controlled differential lock and a reversing unit.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft disc brake acts on the four-wheel drive; when the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. Steering is hydrostatically assisted.

Dimensions and weight

  • Unladen weight: 6,080 kg
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 223 g/kWh

Standard tyre sizes are 14.9-26 at the front and 18.4R38 at the rear. The cab is a rubber-mounted, vibration and sound-insulated safety cab with a noise level of 78 dB, air-suspended seat, digital tractor meter, fold-open front and rear windows, roof hatch, three-stage ventilation system, two-stage heating, radio preparation and height-adjustable steering wheel.

Difference from the 611 LS (Typ 282)

The difference between Typ 382 and Typ 282 is a recurring point when sourcing parts and when purchasing. The Typ 282 is the LS series, built from 1977 to 1984, available with either rear-wheel or four-wheel drive and producing 100 to 110 hp from a naturally aspirated engine. The Typ 382 is available exclusively with four-wheel drive, has a turbocharged engine in its second phase, a higher hydraulic pump output and higher permissible axle loads. The gearbox on both types is a ZF T 3345, but the configuration differs between phases.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart