Menu
EUR

Tractor parts Fendt Favorit 612 (Typ 383)

Looking for parts for your Fendt Favorit 612 (Typ 383) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

546 parts found for Fendt Favorit 612 (Typ 383)
Show:
Ball joint for joystick Fendt
Ball joint for joystick Fendt
€12,91 €10,67
 
Seal pump cover Fendt
Seal pump cover Fendt
€9,39 €7,76
 
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
8%
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€56,69 €46,85 €52,15 €43,10
 
Button inserts Fendt Farmer 240 S (Typ 294), GT 395
8%
Button inserts Fendt Farmer 240 S (Typ 294), GT 395
€35,72 €29,52 €32,86 €27,16
 
Replacement glass unheated, right / left Fendt
Replacement glass unheated, right / left Fendt
Version: Unheated. Installation location: Right/left.
€56,92 €47,04
 
Replacement glass curved 248 x 139 mm, unheated
Replacement glass curved 248 x 139 mm, unheated
Dimensions: 248 x 139 mm. Version: Unheated. Installation location: Right/left.
€22,73 €18,78
 
Mirror 260 x 148 mm, unheated, right / left, rod-Ø 13 mm
8%
Mirror 260 x 148 mm, unheated, right / left, rod-Ø 13 mm
Dimensions: 260 x 148 mm. Height: 260 mm. Width: 148 mm. Radius of curvature: 14...
€104,95 €86,74 €96,55 €79,80
 
Guide ring hood Fendt
Guide ring hood Fendt
€8,36 €6,91
 
Tension spring three-point Fendt
Tension spring three-point Fendt
€4,10 €3,39
 
Potentiometer rotary function control panel hydraulics
Potentiometer rotary function control panel hydraulics
Version: For control unit - hydraulics. Menke no.: 209776.
€146,43 €121,01
 
VDO Seal for tank sensor
VDO
Seal for tank sensor
€17,45 €14,42
 
Pressure switch DSW lift & lower
Pressure switch DSW lift & lower
€25,85 €21,36
 
Push button switch, DSW, work lights
Push button switch, DSW, work lights
€31,89 €26,35
 
Push button switch intermittent wipers 12 / 24 V, button yellow, Ø 30 mm
8%
Push button switch intermittent wipers 12 / 24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€33,84 €27,97 €31,13 €25,73
 
Push button switch headlight 12 / 24 V, button yellow, Ø 30 mm
8%
Push button switch headlight 12 / 24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8...
€44,31 €36,62 €40,77 €33,69
 
Push button switch marker-/parking light 12/24 V, button yellow
8%
Push button switch marker-/parking light 12/24 V, button yellow
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€40,73 €33,66 €37,47 €30,97
 
Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm....
€6,91 €5,71
 
Replacement cover beacon
8%
Replacement cover beacon
€34,56 €28,56 €31,80 €26,28
 
Beacon H1 Quasarino orange 12 V, Ø 130 mm, 204 mm, push-on pin
8%
Beacon H1 Quasarino orange 12 V, Ø 130 mm, 204 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€43,89 €36,27 €40,38 €33,37
 
HELLA Work lamp flood beam H3, 12 / 24 V, 55 / 70 W, upright / hanging
4%
HELLA
Work lamp flood beam H3, 12 / 24 V, 55 / 70 W, upright / hanging
Bulb: H3. Connection: AMP plug. Form: Rectangular. Material: Housing: plastic, l...
€104,67 €86,50 €100,80 €83,31
 
Cobo Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
8%
Cobo
Work lamp H3, 12 V, 55 W, angular, 158 x 96 x 85 mm, hanging
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Nominal vol...
€98,80 €81,65 €90,90 €75,12
 
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€11,13 €9,19
 
Reflectors yellow Ø 60 mm, bore Ø 6,0 mm - 10 pieces
Reflectors yellow Ø 60 mm, bore Ø 6,0 mm - 10 pieces
Colour: Yellow | Hole Ø (mm): 6.0 | Total Ø (mm): 60 | Additional information: W...
€25,18 €20,81
 
Mirror and left 375 x 183 x 26 mm, rod Ø 14 - 20 mm Fendt
8%
Mirror and left 375 x 183 x 26 mm, rod Ø 14 - 20 mm Fendt
Tractor type: Fendt Farmer 240S, 250S, 250V, 260S, 260V, 260P, 270V, 270P, 275S,...
€54,04 €44,66 €49,72 €41,09
 
Brake shoe Foot brake 270 x 80 mm McCORMICK, IHC 1246-1455
8%
Brake shoe Foot brake 270 x 80 mm McCORMICK, IHC 1246-1455
To fit as: McCORMICK / IHC 1246, 1255, 1455
€196,09 €162,06 €180,40 €149,09
 
Cap for connector head yellow
Cap for connector head yellow
Version: Yellow.
€17,56 €14,51
 
Banjo bolt M10 x 1, length 23 mm, wrench size 13 mm Fendt
Banjo bolt M10 x 1, length 23 mm, wrench size 13 mm Fendt
Medium: DOT4. Total length: 23 mm. Thread: M10x1. AF: 13 mm. Thread length: 8 mm...
€17,89 €14,78
 
Accessory set brake caliper Fendt
8%
Accessory set brake caliper Fendt
€68,57 €56,67 €63,08 €52,14
 
KS Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD 226.B
8%
KS
Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD 226.B
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€133,08 €109,98 €122,43 €101,18
 
V-belt pulley Fendt Favorit 611-615
V-belt pulley Fendt Favorit 611-615
€386,84 €319,70
 
Cover Fendt
Cover Fendt
€21,75 €17,98
 
Collet set Fendt
Collet set Fendt
€7,25 €5,99
 
Inlet valve Fendt Farmer 304LS-310LSA, Favorit 509-615LSA
8%
Inlet valve Fendt Farmer 304LS-310LSA, Favorit 509-615LSA
€44,03 €36,39 €40,51 €33,48
 
Connecting rod bearing standard, Ø 63 mm Fendt
8%
Connecting rod bearing standard, Ø 63 mm Fendt
Dimensions: Ø 63 mm.
€34,47 €28,49 €31,71 €26,21
 
Oil sump gasket 6-cylinder Fendt
Oil sump gasket 6-cylinder Fendt
€33,84 €27,96
 
Angle Fendt Favorit 600-615
Angle Fendt Favorit 600-615
€26,69 €22,06
 
Tappet head-Ø 31 mm, shank-Ø 17,5 mm Fendt
8%
Tappet head-Ø 31 mm, shank-Ø 17,5 mm Fendt
Head Ø: 31 mm. Shaft Ø: 17,5 mm.
€42,49 €35,12 €39,09 €32,31
 
Washers M14
Washers M14
€8,98 €7,42
 
Disc cylinder head Fendt
Disc cylinder head Fendt
€1,73 €1,43
 
Showing 481 - 528 of 546

Fendt Favorit 612 (Typ 383) specifications

The Fendt Favorit 612 LSA carries the internal type designation T 383 and was built from 1983 to 1993. Within the Favorit 600 series, the 612 occupies a particular position: it was the only model that had been delivered exclusively with four-wheel drive since its introduction in 1968. A rear-wheel drive version only became available in 1974, but the LSA series under Typ 383 was always built exclusively with four-wheel drive. The LS version with rear-wheel drive falls under Typ FWA 283.

There are two production phases. The first (chassis number T 383.210, 1983 to 1987) covers 1,448 units with 135 hp. The second phase (chassis number T 383.211, 1988 to 1993) covers 1,589 units with 145 hp. In 1987, Fendt introduced the Duospeed drive system and the electronically controlled differential lock on the revised 612 LSA. An optional on-board computer was available for processing and storing operational data.

Engine

The Favorit 612 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. The engine is fitted with Rotocap valves, ring carrier pistons, piston crown cooling, a dry air filter with pre-cleaner, an inline injection pump with governor, a multi-hole injector, an oil cooler, a seven-bearing crankshaft, a gear-driven camshaft, a viscous fan, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,234 cc in the first phase and 6,240 cc in the second phase.

In the first production phase (1983 to 1987), the engine produces 135 hp. In the second phase (1988 to 1993), output was increased to 145 hp. The torque converter increases torque by up to 30 percent. The lock-up clutch connects engine and gearbox depending on load at 1,600 to 1,900 rpm, reducing or eliminating the need to change gear under load.

Transmission and travel speed

The 612 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox type T 3450 with side-mounted gear selection. The change gearbox has six normal gears and four creep gears. The fine-step section has three positions: slow, fast and reverse. In reverse, sixth gear is locked out. Top speed is 40 km/h in the standard version. There was also an extremely rare 50 km/h version with a modified final drive, achieving approximately 45 km/h in practice. From 1987, the Duospeed gearbox was available, enabling a continuously variable drive range with four power levels.

The main gearbox has four pre-selectable speed ranges: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute. Maximum lift capacity of the rear three-point hitch is 6,000 kg. The permissible front axle load is 4,000 kg and the rear axle load 6,000 kg.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes, drive and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft brake acting as a disc brake operates on the four-wheel drive. When the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. The front planetary oscillating axle has an oscillation angle of up to 12 degrees. The rear axle features an electronically controlled differential lock that can be engaged automatically. Steering is hydrostatically assisted.

Dimensions and weight

  • Length: 470 cm
  • Width: 238 cm
  • Height: 289 cm
  • Turning radius: 5.7 m
  • Unladen weight: 6,315 kg
  • Fuel tank: 222 litres

Standard tyre sizes are 16.9-26 at the front and 18.4R38 or 20.8R38 at the rear depending on the version.

Difference from the 612 LS (Typ 283)

A point that regularly comes up is the difference between Typ 383 and Typ 283. The Typ 283 is the LS series with rear-wheel drive and a ZF T 3445 gearbox. The Typ 383 has four-wheel drive as standard, a slightly differently configured ZF T 3450 gearbox, a higher hydraulic pump output and higher permissible axle loads. In addition, the Typ 383 received the Duospeed drive system and the electronically controlled differential lock in its second phase, which the Typ 283 does not have.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart