Web Analytics
Fendt Favorit 612 (Typ 383) tractor parts & specs - Techniek Totaal
Menu
EUR

Tractor parts Fendt Favorit 612 (Typ 383)

Looking for parts for your Fendt Favorit 612 (Typ 383) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

402 Products
Show:
GRANIT Shim M14
GRANIT
Shim M14
€6,69 €5,53
 
GRANIT Gasket For oil return line
GRANIT
Gasket For oil return line
€4,09 €3,38
 
GRANIT Gasket from exhaust manifold to turbocharger
GRANIT
Gasket from exhaust manifold to turbocharger
€61,69 €50,98
 
GRANIT Cylinder head bolt
GRANIT
Cylinder head bolt
Dimensions: M14 x 120 mm.
€58,49 €48,34
 
GRANIT Bolt set
GRANIT
Bolt set
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit...
€21,59 €17,84
 
GRANIT Lever
GRANIT
Lever
€64,29 €53,13
 
GRANIT Door handle right and left
GRANIT
Door handle right and left
€38,29 €31,64
 
GRANIT Push button insert
GRANIT
Push button insert
€32,89 €27,18
 
GRANIT Spindle for lifting strut
GRANIT
Spindle for lifting strut
Dimensions: Length = 350, Thread = M28 x 2 mm.
€434,79 €359,33
 
GRANIT Clip
GRANIT
Clip
Brand: Fendt.
€12,49 €10,32
 
ROCKINGER Inner part
ROCKINGER
Inner part
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.289,49 €1.065,69
 
GRANIT Spring plate
GRANIT
Spring plate
€9,09 €7,51
 
GRANIT Start switch 12 V/24 V
GRANIT
Start switch 12 V/24 V
Version: • With 2 moulded reversible safety keys made of nickel silver, • For ce...
€51,09 €42,22
 
HELLA Rocker switch For air conditioning
HELLA
Rocker switch For air conditioning
Version: Rocker operation: on/off switch, 12 V/24 V, power rating: 16 A at 12 V,...
€35,59 €29,41
 
HELLA Work light
HELLA
Work light
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 153 x 93 x ...
€51,69 €42,72
 
GRANIT Cover
GRANIT
Cover
€53,69 €44,37
 
HELLA Work light
HELLA
Work light
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: • Housing: pl...
€61,29 €50,65
 
HELLA Work light
HELLA
Work light
Bulb: H3. Connection: AMP plug. Form: Rectangular. Material: Housing: plastic, l...
€113,09 €93,46
 
Cobo Work light
Cobo
Work light
Bulb: H3. Form: Rectangular. Dimensions W x H x D: 158 x 96 x 85 mm. Nominal vol...
€91,09 €75,28
 
Wabco Connector head
Wabco
Connector head
Version: Yellow, brake line. Connection: M16 x 1.5. Operating pressure max.: 10....
€21,69 €17,93
 
Wabco Connector head
Wabco
Connector head
Version: Red, supply line. Connection: M16 x 1.5. Operating pressure max.: 10.0 ...
€22,09 €18,26
 
GRANIT Cap for connector head
GRANIT
Cap for connector head
Version: Yellow.
€13,09 €10,82
 
GRANIT Pad retaining pin
GRANIT
Pad retaining pin
€14,09 €11,64
 
Showing 169 - 192 of 402

Fendt Favorit 612 (Typ 383) specifications

The Fendt Favorit 612 LSA carries the internal type designation T 383 and was built from 1983 to 1993. Within the Favorit 600 series, the 612 occupies a particular position: it was the only model that had been delivered exclusively with four-wheel drive since its introduction in 1968. A rear-wheel drive version only became available in 1974, but the LSA series under Typ 383 was always built exclusively with four-wheel drive. The LS version with rear-wheel drive falls under Typ FWA 283.

There are two production phases. The first (chassis number T 383.210, 1983 to 1987) covers 1,448 units with 135 hp. The second phase (chassis number T 383.211, 1988 to 1993) covers 1,589 units with 145 hp. In 1987, Fendt introduced the Duospeed drive system and the electronically controlled differential lock on the revised 612 LSA. An optional on-board computer was available for processing and storing operational data.

Engine

The Favorit 612 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. The engine is fitted with Rotocap valves, ring carrier pistons, piston crown cooling, a dry air filter with pre-cleaner, an inline injection pump with governor, a multi-hole injector, an oil cooler, a seven-bearing crankshaft, a gear-driven camshaft, a viscous fan, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,234 cc in the first phase and 6,240 cc in the second phase.

In the first production phase (1983 to 1987), the engine produces 135 hp. In the second phase (1988 to 1993), output was increased to 145 hp. The torque converter increases torque by up to 30 percent. The lock-up clutch connects engine and gearbox depending on load at 1,600 to 1,900 rpm, reducing or eliminating the need to change gear under load.

Transmission and travel speed

The 612 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox type T 3450 with side-mounted gear selection. The change gearbox has six normal gears and four creep gears. The fine-step section has three positions: slow, fast and reverse. In reverse, sixth gear is locked out. Top speed is 40 km/h in the standard version. There was also an extremely rare 50 km/h version with a modified final drive, achieving approximately 45 km/h in practice. From 1987, the Duospeed gearbox was available, enabling a continuously variable drive range with four power levels.

The main gearbox has four pre-selectable speed ranges: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute. Maximum lift capacity of the rear three-point hitch is 6,000 kg. The permissible front axle load is 4,000 kg and the rear axle load 6,000 kg.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes, drive and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft brake acting as a disc brake operates on the four-wheel drive. When the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. The front planetary oscillating axle has an oscillation angle of up to 12 degrees. The rear axle features an electronically controlled differential lock that can be engaged automatically. Steering is hydrostatically assisted.

Dimensions and weight

  • Length: 470 cm
  • Width: 238 cm
  • Height: 289 cm
  • Turning radius: 5.7 m
  • Unladen weight: 6,315 kg
  • Fuel tank: 222 litres

Standard tyre sizes are 16.9-26 at the front and 18.4R38 or 20.8R38 at the rear depending on the version.

Difference from the 612 LS (Typ 283)

A point that regularly comes up is the difference between Typ 383 and Typ 283. The Typ 283 is the LS series with rear-wheel drive and a ZF T 3445 gearbox. The Typ 383 has four-wheel drive as standard, a slightly differently configured ZF T 3450 gearbox, a higher hydraulic pump output and higher permissible axle loads. In addition, the Typ 383 received the Duospeed drive system and the electronically controlled differential lock in its second phase, which the Typ 283 does not have.

Brands
  • View more
Locking pin Ø
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart