Menu
EUR

Tractor parts Fendt Favorit 614 (Typ 384)

Looking for parts for your Fendt Favorit 614 (Typ 384) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

543 parts found for Fendt Favorit 614 (Typ 384)
Show:
Wheel brake cylinder Ø 38,1 mm, DOT 4 Fendt Favorit 600-615
€329,17 €272,04 €314,35 €259,79
You save 5%
Sealing ring 58 x 80 x 10/12 mm Fendt Favorit 611-615
Version: 58 x 80 x 10 / 12 mm. More
Version: 58 x 80 x 10 / 12 mm.
€67,44 €55,74 €61,35 €50,70
You save 9%
Gaiter gear lever Fendt
Seal 0,5 mm Fendt
Thickness: 0,5 mm. More
Thickness: 0,5 mm.
€6,30 €5,21
Gasket manual transmission top Fendt Favorit 600-615
€54,80 €45,29 €49,85 €41,20
You save 9%
Replacement glass, main mirror curved 366 x 176 x 3 mm, unheated
Dimensions (mm): 366 x 176 x 3. Version: Unheated. Installation location: Right/left. Radius of curvature (mm): 1800. More
Dimensions (mm): 366 x 176 x 3. Version: Unheated. Installation locati...
€29,60 €24,46
Breather filter
€35,83 €29,61 €32,60 €26,94
You save 9%
Optibelt V-belt AVX10, 1425 mm Fendt, Massey Ferguson
Optibelt
Description: optibelt MARATHON X. h: 8 mm. Outer length: 1425 mm. Inner length: 1374 mm. Profile: AVX10. Technical data: The optibelt MARATHON X V-bel... More
Description: optibelt MARATHON X. h: 8 mm. Outer length: 1425 mm. Inne...
€26,95 €22,27
KS Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD 226.B
KS
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm. More
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€133,08 €109,98 €121,15 €100,12
You save 9%
KS Piston set complete Ø 105 mm, piston pin Ø 35 mm, depth 20,4 mm
KS
Dimensions: 3 rings, Ø 105 mm, gudgeon pin Ø 35 x 82 mm, combustion chamber Ø 60 mm, combustion chamber depth 20.4 mm, ring carrier piston, dry lin... More
Dimensions: 3 rings, Ø 105 mm, gudgeon pin Ø 35 x 82 mm, combustion ...
€404,42 €334,23 €368,15 €304,26
You save 9%
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
€37,35 €30,87
Hose thermostat - heating valve Ø 18 mm, length 1700 mm Fendt
Inner Ø: 18 mm. Length: 1700 mm. Material thickness: 3,5 mm. More
Inner Ø: 18 mm. Length: 1700 mm. Material thickness: 3,5 mm.
€47,02 €38,86 €42,80 €35,37
You save 9%
V-belt for air conditioning Fendt
Version: For air conditioning. More
Version: For air conditioning.
€9,35 €7,73
Fan clutch Fendt Favorit 611-615
€318,50 €263,22 €289,95 €239,63
You save 9%
V-belt with air conditioning system Fendt
Version: With air conditioning system. More
Version: With air conditioning system.
€10,85 €8,97
Radiator hose water pump suction pipe Ø 32/36 mm Fendt
Inner Ø: 32 / 36 mm. More
Inner Ø: 32 / 36 mm.
€27,60 €22,81
Collet set Fendt
Connecting rod without bearing Fendt Farmer 304-312, Favorit 509-615
€322,84 €266,81 €293,90 €242,89
You save 9%
Piston set, complete 3 rings, Ø 105 mm, piston pin Ø 35 x 88 mm
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion chamber Ø 60 mm, Combustion chamber depth 21.7 mm. Description: Supplied withou... More
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion ...
€285,37 €235,84 €259,75 €214,67
You save 9%
Connecting rod bearing standard, Ø 63 mm Fendt
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€34,47 €28,49 €31,35 €25,91
You save 9%
Crankshaft seal for Ø 78 x 100 x 13 mm Fendt
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595. More
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595.
€29,95 €24,75
Cylinder head bolt 14 x 158 mm Case IH, Steyr, Fendt
Dimensions: M14 x 158 mm. More
Dimensions: M14 x 158 mm.
€35,29 €29,17 €32,10 €26,53
You save 9%
Piston cooling nozzle Fendt
€149,86 €123,85 €143,60 €118,68
You save 4%
Cover crankshaft rear Fendt
€652,71 €539,43 €594,20 €491,07
You save 9%
Bleed valve Fendt Farmer 102-312, Favorit 509-615, GT 231
€57,92 €47,87 €52,70 €43,55
You save 9%
Tappet head-Ø 31 mm, shank-Ø 17,5 mm Fendt
Head Ø: 31 mm. Shaft Ø: 17,5 mm. More
Head Ø: 31 mm. Shaft Ø: 17,5 mm.
€42,49 €35,12 €38,65 €31,94
You save 9%
Washers M14
€8,60 €7,11
Disc cylinder head Fendt
Adjustment screw Fendt
Stop cable A 1485 mm, B 1035 mm Fendt Favorit 600-615
A: 1485 mm. B: 1035 mm. More
A: 1485 mm. B: 1035 mm.
€194,07 €160,39 €176,65 €145,99
You save 9%
Oil pump inlet 34 mm Renault, Fendt
Dimensions: Intake, 34 mm. More
Dimensions: Intake, 34 mm.
€633,74 €523,75 €576,95 €476,82
You save 9%
Connecting rod bearing standard, Ø 63 mm
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€36,88 €30,48 €33,55 €27,73
You save 9%
Piston, complete Fendt Farmer 304-312, Favorit 509-615
€82,93 €68,54 €75,45 €62,36
You save 9%
Turbocharger mounting kit Fendt, Deutz-Fahr
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil inlet gasket, 1x oil outlet gasket, 4x stud bolt, 4x copper-plated nut. More
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil in...
€130,62 €107,95 €118,90 €98,26
You save 9%
Showing 433 - 480 of 543

Fendt Favorit 614 (Typ 384) specifications

The Fendt Favorit 614 LSA is the four-wheel drive version from the Favorit 600 series and carries the internal type designation T 384. The tractor was produced from 1983 to 1993 and went through two clearly distinct production phases during that period, each with its own technical designation and engine output. The LS variant with rear-wheel drive falls under type FWA 284. The 614 LSA was the model that remained in production for the longest period within the LS line of the 600 series.

Transmission and travel speed

The Favorit 614 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox, type T 3550, with side-mounted gear selection. The main gearbox has four pre-selectable speed ranges. In the 40 km/h version, the ranges are divided as follows: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h. In the 30 km/h version, the six forward gears run from 2.47 to 24.48 km/h; in the 40 km/h version from 3.07 to 30.36 km/h. From 1987 onwards, the Duospeed gearbox was available alongside the conventional transmission, enabling a continuously variable drive range up to 20 km/h. There was also an extremely rare 50 km/h version, although approximately 45 km/h was achieved in practice.

Engine

The Favorit 614 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. Further engine features include Rotocap valves, individually mounted cylinder heads, piston crown cooling, ring carrier pistons, a dry air filter with pre-cleaner, an inline injection pump with governor and thermostatically controlled dual-circuit cooling. The crankshaft runs on seven bearings.

Displacement is 6,234 cc. Power output varies depending on the production phase. In the first phase (T 384.210, 1983 to 1987, 649 units), the engine produces 155 hp, with a maximum torque of 522 Nm at 1,500 rpm. In the second phase (T 384.211, 1988 to 1993, 922 units), output was increased to 165 hp, with a maximum torque of 631 Nm at 1,500 rpm.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO with power-shift drive at 1,000 rpm is available.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute (46 plus 26 litres) at a working pressure of 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available, with a maximum lift capacity of 3,490 kg. The lift system features Fendt-Tronic for delay-free activation of the control impulse, draft, position and continuously variable mixed control, rapid raise, transport lock, lowering restrictor, lift height limiter and depth control.

Brakes and steering

The braking system consists of hydraulically operated internal shoe brakes acting on the rear wheels, usable as individual wheel brakes. Steering is hydrostatically assisted.

Weight and dimensions

  • Permissible gross weight: 7,500 kg (optional 8,500 kg)
  • Wheelbase: 272 cm
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 227 g/kWh

Standard tyre sizes are 16.9-26 at the front and 20.8R38 at the rear. The unladen weight of the 614 LS is approximately 6,140 kg.

Cab

The cab is a rubber-mounted, sound and vibration-isolated safety cab with fold-open front and rear windows, tinted glass, windscreen washer system, sun visor, two-stage hot water heating, three-stage ventilation system, coat hooks, two work lights, radio preparation, roof hatch, air-suspended seat, digital tractor meter, height-adjustable steering wheel and interior lighting.

Difference from the LS and the earlier SL

A question that frequently comes up with the 614 is the difference between it and the LS and the earlier SL version. The Favorit 614 SL (type FWA 284) is the late 1970s version with rear-wheel drive. The 614 LSA (type 384) combines four-wheel drive with the revised LS cab and hydraulics. Engine-wise the two are closely related, but the LSA received a substantial power increase in its second phase, rising from 155 to 165 hp, along with higher torque figures.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart