Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Fendt Favorit 614 (Typ 384)

Looking for parts for your Fendt Favorit 614 (Typ 384) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

543 parts found for Fendt Favorit 614 (Typ 384)
Show:
Wheel brake cylinder Ø 38,1 mm, DOT 4 Fendt Favorit 600-615
5%
Wheel brake cylinder Ø 38,1 mm, DOT 4 Fendt Favorit 600-615
Hole Ø: 38.1 mm.
€329,17 €272,04 €314,35 €259,79
 
Sealing ring 58 x 80 x 10/12 mm Fendt Favorit 611-615
9%
Sealing ring 58 x 80 x 10/12 mm Fendt Favorit 611-615
Version: 58 x 80 x 10 / 12 mm.
€67,44 €55,74 €61,35 €50,70
 
Gaiter gear lever Fendt
Gaiter gear lever Fendt
€27,70 €22,89
 
Seal 0,5 mm Fendt
Seal 0,5 mm Fendt
Thickness: 0,5 mm.
€6,30 €5,21
 
Gasket manual transmission top Fendt Favorit 600-615
9%
Gasket manual transmission top Fendt Favorit 600-615
€54,80 €45,29 €49,85 €41,20
 
Replacement glass, main mirror curved 366 x 176 x 3 mm, unheated
Replacement glass, main mirror curved 366 x 176 x 3 mm, unheated
Dimensions (mm): 366 x 176 x 3. Version: Unheated. Installation location: Right/...
€29,60 €24,46
 
Breather filter
9%
Breather filter
€35,83 €29,61 €32,60 €26,94
 
Optibelt V-belt AVX10, 1425 mm Fendt, Massey Ferguson
Optibelt
V-belt AVX10, 1425 mm Fendt, Massey Ferguson
Description: optibelt MARATHON X. h: 8 mm. Outer length: 1425 mm. Inner length: ...
€26,95 €22,27
 
KS Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD 226.B
9%
KS
Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD 226.B
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€133,08 €109,98 €121,15 €100,12
 
KS Piston set complete Ø 105 mm, piston pin Ø 35 mm, depth 20,4 mm
9%
KS
Piston set complete Ø 105 mm, piston pin Ø 35 mm, depth 20,4 mm
Dimensions: 3 rings, Ø 105 mm, gudgeon pin Ø 35 x 82 mm, combustion chamber Ø 60...
€404,42 €334,23 €368,15 €304,26
 
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
VICTOR REINZ
Valve stem seal set Ø 9 x 1,5 mm
€37,35 €30,87
 
Hose thermostat - heating valve Ø 18 mm, length 1700 mm Fendt
9%
Hose thermostat - heating valve Ø 18 mm, length 1700 mm Fendt
Inner Ø: 18 mm. Length: 1700 mm. Material thickness: 3,5 mm.
€47,02 €38,86 €42,80 €35,37
 
V-belt for air conditioning Fendt
V-belt for air conditioning Fendt
Version: For air conditioning.
€9,35 €7,73
 
Fan clutch Fendt Favorit 611-615
9%
Fan clutch Fendt Favorit 611-615
€318,50 €263,22 €289,95 €239,63
 
V-belt with air conditioning system Fendt
V-belt with air conditioning system Fendt
Version: With air conditioning system.
€10,85 €8,97
 
Radiator hose water pump suction pipe Ø 32/36 mm Fendt
Radiator hose water pump suction pipe Ø 32/36 mm Fendt
Inner Ø: 32 / 36 mm.
€27,60 €22,81
 
Optibelt V-belt set Fendt Favorit 600-615 - 2 pieces
Optibelt
V-belt set Fendt Favorit 600-615 - 2 pieces
€39,40 €32,56
 
Collet set Fendt
Collet set Fendt
€6,90 €5,70
 
Connecting rod without bearing Fendt Farmer 304-312, Favorit 509-615
9%
Connecting rod without bearing Fendt Farmer 304-312, Favorit 509-615
€322,84 €266,81 €293,90 €242,89
 
Piston set, complete 3 rings, Ø 105 mm, piston pin Ø 35 x 88 mm
9%
Piston set, complete 3 rings, Ø 105 mm, piston pin Ø 35 x 88 mm
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion chamber Ø 60...
€285,37 €235,84 €259,75 €214,67
 
Connecting rod bearing standard, Ø 63 mm Fendt
9%
Connecting rod bearing standard, Ø 63 mm Fendt
Dimensions: Ø 63 mm.
€34,47 €28,49 €31,35 €25,91
 
Crankshaft seal for Ø 78 x 100 x 13 mm Fendt
Crankshaft seal for Ø 78 x 100 x 13 mm Fendt
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595.
€29,95 €24,75
 
Cylinder head bolt 14 x 158 mm Case IH, Steyr, Fendt
9%
Cylinder head bolt 14 x 158 mm Case IH, Steyr, Fendt
Dimensions: M14 x 158 mm.
€35,29 €29,17 €32,10 €26,53
 
Piston cooling nozzle Fendt
4%
Piston cooling nozzle Fendt
€149,86 €123,85 €143,60 €118,68
 
Cover crankshaft rear Fendt
9%
Cover crankshaft rear Fendt
€652,71 €539,43 €594,20 €491,07
 
Bleed valve Fendt Farmer 102-312, Favorit 509-615, GT 231
9%
Bleed valve Fendt Farmer 102-312, Favorit 509-615, GT 231
€57,92 €47,87 €52,70 €43,55
 
Tappet head-Ø 31 mm, shank-Ø 17,5 mm Fendt
9%
Tappet head-Ø 31 mm, shank-Ø 17,5 mm Fendt
Head Ø: 31 mm. Shaft Ø: 17,5 mm.
€42,49 €35,12 €38,65 €31,94
 
Washers M14
Washers M14
€8,60 €7,11
 
Disc cylinder head Fendt
Disc cylinder head Fendt
€1,65 €1,36
 
Adjustment screw Fendt
Adjustment screw Fendt
€67,45 €55,74
 
Stop cable A 1485 mm, B 1035 mm Fendt Favorit 600-615
9%
Stop cable A 1485 mm, B 1035 mm Fendt Favorit 600-615
A: 1485 mm. B: 1035 mm.
€194,07 €160,39 €176,65 €145,99
 
Oil pump inlet 34 mm Renault, Fendt
9%
Oil pump inlet 34 mm Renault, Fendt
Dimensions: Intake, 34 mm.
€633,74 €523,75 €576,95 €476,82
 
Connecting rod bearing standard, Ø 63 mm
9%
Connecting rod bearing standard, Ø 63 mm
Dimensions: Ø 63 mm.
€36,88 €30,48 €33,55 €27,73
 
Piston, complete Fendt Farmer 304-312, Favorit 509-615
9%
Piston, complete Fendt Farmer 304-312, Favorit 509-615
Menke no.: 208848.
€82,93 €68,54 €75,45 €62,36
 
Turbocharger mounting kit Fendt, Deutz-Fahr
9%
Turbocharger mounting kit Fendt, Deutz-Fahr
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil inlet gasket...
€130,62 €107,95 €118,90 €98,26
 
Showing 433 - 480 of 543

Fendt Favorit 614 (Typ 384) specifications

The Fendt Favorit 614 LSA is the four-wheel drive version from the Favorit 600 series and carries the internal type designation T 384. The tractor was produced from 1983 to 1993 and went through two clearly distinct production phases during that period, each with its own technical designation and engine output. The LS variant with rear-wheel drive falls under type FWA 284. The 614 LSA was the model that remained in production for the longest period within the LS line of the 600 series.

Transmission and travel speed

The Favorit 614 LSA is fitted with a helical-cut ZF synchronised fine-step gearbox, type T 3550, with side-mounted gear selection. The main gearbox has four pre-selectable speed ranges. In the 40 km/h version, the ranges are divided as follows: first range 0 to 5.2 km/h, second range 0 to 8.2 km/h, third range 0 to 12.8 km/h and fourth range 0 to 19.4 km/h. In the 30 km/h version, the six forward gears run from 2.47 to 24.48 km/h; in the 40 km/h version from 3.07 to 30.36 km/h. From 1987 onwards, the Duospeed gearbox was available alongside the conventional transmission, enabling a continuously variable drive range up to 20 km/h. There was also an extremely rare 50 km/h version, although approximately 45 km/h was achieved in practice.

Engine

The Favorit 614 LSA is powered by an MWM TD 226-6.2, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection. Further engine features include Rotocap valves, individually mounted cylinder heads, piston crown cooling, ring carrier pistons, a dry air filter with pre-cleaner, an inline injection pump with governor and thermostatically controlled dual-circuit cooling. The crankshaft runs on seven bearings.

Displacement is 6,234 cc. Power output varies depending on the production phase. In the first phase (T 384.210, 1983 to 1987, 649 units), the engine produces 155 hp, with a maximum torque of 522 Nm at 1,500 rpm. In the second phase (T 384.211, 1988 to 1993, 922 units), output was increased to 165 hp, with a maximum torque of 631 Nm at 1,500 rpm.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO with power-shift drive at 1,000 rpm is available.

Hydraulics and lift system

The hydraulic tandem pump delivers 72 litres per minute (46 plus 26 litres) at a working pressure of 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available, with a maximum lift capacity of 3,490 kg. The lift system features Fendt-Tronic for delay-free activation of the control impulse, draft, position and continuously variable mixed control, rapid raise, transport lock, lowering restrictor, lift height limiter and depth control.

Brakes and steering

The braking system consists of hydraulically operated internal shoe brakes acting on the rear wheels, usable as individual wheel brakes. Steering is hydrostatically assisted.

Weight and dimensions

  • Permissible gross weight: 7,500 kg (optional 8,500 kg)
  • Wheelbase: 272 cm
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 227 g/kWh

Standard tyre sizes are 16.9-26 at the front and 20.8R38 at the rear. The unladen weight of the 614 LS is approximately 6,140 kg.

Cab

The cab is a rubber-mounted, sound and vibration-isolated safety cab with fold-open front and rear windows, tinted glass, windscreen washer system, sun visor, two-stage hot water heating, three-stage ventilation system, coat hooks, two work lights, radio preparation, roof hatch, air-suspended seat, digital tractor meter, height-adjustable steering wheel and interior lighting.

Difference from the LS and the earlier SL

A question that frequently comes up with the 614 is the difference between it and the LS and the earlier SL version. The Favorit 614 SL (type FWA 284) is the late 1970s version with rear-wheel drive. The 614 LSA (type 384) combines four-wheel drive with the revised LS cab and hydraulics. Engine-wise the two are closely related, but the LSA received a substantial power increase in its second phase, rising from 155 to 165 hp, along with higher torque figures.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart