Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

535 parts found for Fendt Favorit 615 (Typ 385)
Show:
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, all bores
Wabco
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylinder capacity (cm³): 159 | Coolant: Luft | Type: 1 - cylinder | Lubrication syst... More
Cooling system: Air | Max. speed (rpm): 3000 | Stroke (mm): 36 | Cylin...
€2.045,95 €1.690,87 €1.960,65 €1.620,38
You save 4%
Clutch plate 350 41 x 45, 22 splines sintered Fendt Favorit 611 - 615
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 41 x 45, 22 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€492,81 €407,28 €453,39 €374,70
You save 8%
HELLA Alternator 14 V, 120 A, without belt pulley
HELLA
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal voltage (V): 14 V | Additional information: Without pulley More
Nominal values (V / A): 14 / 120 | Charging current (A): 120 | Nominal...
€553,58 €457,50 €426,53 €352,50
You save 23%
FEBI Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
You save 55%
Pull handle Fendt Farmer 5S, 105, 106, 108
€62,83 €51,93 €57,80 €47,77
You save 8%
ROCKINGER Drawbar K80 rail width 311 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.397,74 €1.155,16 €1.076,93 €890,03
You save 23%
HELLA Work lamp flood beam H3, 12 / 24 V, 35 / 70 W, square, mounting, bolted
HELLA
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: • Housing: plastic • Diffusing lens: glass. Dimensions W x H x D: 154 x 94 x 11... More
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: •...
€56,69 €46,85 €54,59 €45,12
You save 4%
HELLA Rear light right 158 x 64 x 51 mm, 12 V Fendt, John Deere, Kubota
HELLA
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S, 303, 304, 305, 306, 307 (Typn 170, 175), 308 (Typn 178, 308), 309 (Typn 186, 3... More
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S...
€29,40 €24,30
Gearshift pattern Fendt Farmer 4S, 5S, Favorit 600-615
To fit as: Fendt Farmer 4S, 5S, 102, 103, 104, 105, 106, 108, 240, 250, 260, 270, 275, 280, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, GT 345, ... More
To fit as: Fendt Farmer 4S, 5S, 102, 103, 104, 105, 106, 108, 240, 250...
€9,91 €8,19
Bosch/Rexroth Hydraulic pump 19 cm³, serrated as B 17 x 14, 9 splines, left, Fendt
Bosch/Rexroth
Drive shaft: Splined shaft B 17 x 14 Z9 | Bosch no.: 1517222721 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 19 More
Drive shaft: Splined shaft B 17 x 14 Z9 | Bosch no.: 1517222721 | Dire...
€599,88 €495,77 €551,89 €456,11
You save 8%
Wabco Overflow valve 6 bar, M22 x 1,5 Fendt Farmer, Favorit
Wabco
Connection: M22 x 1.5 | Working pressure (bar): 13 | Overflow pressure (bar): 6 More
Connection: M22 x 1.5 | Working pressure (bar): 13 | Overflow pressure...
€120,58 €99,65 €110,93 €91,68
You save 8%
Clutch slave cylinder Ø 38,1 mm, DOT 4 Fendt Favorit 611 - 615
Hole Ø (mm): 38.1 | Menke no.: 73708 More
Hole Ø (mm): 38.1 | Menke no.: 73708
€127,96 €105,75 €117,72 €97,29
You save 8%
Alternator 14 V, 65 A, flange 56 mm, pulley Ø 73 mm
Additional information: With W connection | Charging current (A): 65 | Belt width (mm) / type: 9,7 | Installation angle (°): l + r 60 | Nominal volta... More
Additional information: With W connection | Charging current (A): 65 |...
€144,18 €119,16 €132,65 €109,62
You save 8%
Radiator hose inner-Ø 8 mm, 500 mm, thickness 3,5 mm Fendt
Material thickness (mm): 3,5 | Inner Ø (mm): 8 | Length (mm): 500 More
Material thickness (mm): 3,5 | Inner Ø (mm): 8 | Length (mm): 500
€27,76 €22,94
HELLA Alternator 14 V / 65 A, pulley Ø 73 mm, 1 groove, Case IH, Fendt
HELLA
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current (A): 65 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 65 | No. of grooves: 1 | Charging current...
€371,33 €306,88 €286,10 €236,44
You save 23%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, clockwise
€516,56 €426,91 €309,38 €255,69
You save 40%
GRAMMER Air-sprung tractor seat fabric Maximo Dynamic DDS MSG95AL/741
GRAMMER
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Jo... More
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery typ...
€3.648,07 €3.014,94
Turbocharger Fendt Farmer 312, Favorit 512-515, 611-615
€1.903,02 €1.572,74 €1.823,68 €1.507,18
You save 4%
Bosch/Rexroth Hydraulic pump anticlockwise 19 cm³/rpm., taper 1:5, Ø 17 x 17
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of rotation: Anticlockwise. Bosch no.: 0510615332. Adaptor plate hole pattern:... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Directio...
€1.196,85 €989,13 €1.101,10 €910,00
You save 8%
LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x 76 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€72,92 €60,26 €67,09 €55,44
You save 8%
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr More
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,59 €6,27
Drive shaft 1710 mm Fendt Favorit 611 - 615
Length (mm): 1710 More
Length (mm): 1710
€1.072,65 €886,49 €986,84 €815,57
You save 8%
LED work lights round Ø 120 mm floodlight 6800 lm, 60 W
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Voltage range (V): 10 - 30 | Power (watts): 60 | Protection class: IP6K9K / IP67 | W... More
Bulb: LED | Housing material: Aluminium | EMC: CISPR 25 class 3 | Volt...
€85,72 €70,84 €78,86 €65,18
You save 8%
Wabco Overflow valve 6,5 bar, M22 x 1,5 Fendt Farmer, Favorit
Wabco
Adjustment range (bar): 5,3 - 7,0 | Opening pressure (bar): 6,5 | Outlet connection: 2: M22 x 1,5 | To fit: u.a. DAF, Faun, Feldbinder, Freightliner, ... More
Adjustment range (bar): 5,3 - 7,0 | Opening pressure (bar): 6,5 | Outl...
€131,31 €108,52 €120,81 €99,84
You save 8%
Repair set clutch cylinder with piston Fendt
Additional information: with piston More
Additional information: with piston
€85,35 €70,54 €78,52 €64,89
You save 8%
Repair set clutch cylinder with piston Fendt Favorit 600 - 615
Additional information: with piston | Menke no.: 209836 More
Additional information: with piston | Menke no.: 209836
€71,54 €59,12 €65,82 €54,39
You save 8%
Thrust bearing PTO shaft Fendt Farmer 102 - 309
€151,01 €124,80 €138,93 €114,82
You save 8%
Expansion valve 3/8 - 1/2 inch o-ring Fendt, John Deere, Renault
Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 8, 1/2"" O-ring | Equipment: O-ring | Weight (g): 182 More
Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 8, 1/2...
€90,25 €74,59 €83,03 €68,62
You save 8%
Clutch plate 350 41 x 45, 22 splines Fendt Favorit 611 - 615
Dimensions (mm): 41 x 45, 22 grooves | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 22 grooves | Additional information: Made in...
€407,96 €337,16 €375,32 €310,18
You save 8%
Filter set fuel filter
Rubber plug brake cylinder DOT4 Fendt Farmer 240-307
€6,68 €5,52
Valve cover Fendt
€58,35 €48,22 €53,68 €44,37
You save 8%
Seal feed pump
€2,89 €2,39
Force sensor pin 60 kN, 158,1 mm, Ø 36,8 mm Fendt
Dimensions: Length = 158.1, Ø = 36.8 mm. More
Dimensions: Length = 158.1, Ø = 36.8 mm.
€795,79 €657,68 €732,13 €605,06
You save 8%
ROCKINGER Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Colour: AGCO grey. Description: Ball hitch wit... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.385,51 €1.145,05 €1.067,51 €882,24
You save 23%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.285,58 €1.062,46 €990,51 €818,61
You save 23%
Scharmüller Drawbar frame standard K80 330/25/32 mm, 3000 kg Deutz-Fahr, Fendt
Scharmüller
To fit as: Deutz-Fahr Serie D-06 (10006-12006); Fendt Serie Favorit 600 LS/LSA/S/SL; More
To fit as: Deutz-Fahr Serie D-06 (10006-12006); Fendt Serie Favorit 60...
€2.419,21 €1.999,35 €2.225,67 €1.839,40
You save 8%
Brake light switch mechanical NC-contact, neutral position on
Version: Break contact, normally on. More
Version: Break contact, normally on.
€90,91 €75,13 €83,64 €69,12
You save 8%
Headlight left / right 12 / 24 V, H4, built-in, 172 x 142 x 77 mm
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK/T4W. Material: Housing: metal, lens: glass. Dimensions W x H x D: 172 x 142 x 77 mm. Instal... More
Bulb: 12V60/55W / H4, 12V4WK / T4W, 24V75/70W / H4, 24V4WK/T4W. Materi...
€48,86 €40,38 €44,95 €37,15
You save 8%
MANN-FILTER Air filter C15165/3, AF4135, inner CF 700
MANN-FILTER
Suitable secondary element 565CF700 More
Suitable secondary element 565CF700
€62,01 €51,25
Coupling pin curved Ø 31 mm, 150 mm, 480 mm
€38,19 €31,56 €35,13 €29,04
You save 8%
HELLA Indicator/position light 12 V, R21W/C5W, yellow/white - 2 pieces
HELLA
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horizontal, yellow indicator light, white position light, with 2 holes for M4 fixing ... More
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horiz...
€47,11 €38,94
Wabco Compressor Ø 75 mm, stroke 36 mm, 159 cm³, 10 bar, luftgekühlt (air-cooled)
Wabco
Cooling system: Air | Piston stroke (mm): 36 | Operating pressure max. (bar): 10 | Piston Ø (mm): 75 | Cylinder capacity (cm³): 159 | Thread: Cranks... More
Cooling system: Air | Piston stroke (mm): 36 | Operating pressure max....
€2.006,48 €1.658,25 €1.922,84 €1.589,13
You save 4%
Showing 49 - 96 of 535

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart