Menu
EUR

Fendt Favorit 818 tractor parts & technical data

With more than 550 parts for the Fendt Favorit 818, this page covers lighting, electrics, trailer couplings and more, so you can quickly see what fits.

549 parts found for Fendt Favorit 818
Show:
GRANIT Adaptor water pump - cylinder head Ø 45 x 55 x 39 mm Fendt
GRANIT
Dimensions: Ø 45 x 55 x 39 mm. More
Dimensions: Ø 45 x 55 x 39 mm.
€155,93 €128,87 €148,10 €122,40
You save 5%
GRANIT Rubber elbow heating / cab Ø 17 mm Fendt
GRANIT
Inner Ø: 17 mm. More
Inner Ø: 17 mm.
€52,71 €43,56 €50,00 €41,32
You save 5%
GRANIT Hose elbow heating Ø 18 mm Fendt
GRANIT
Inner Ø: 18 mm. More
Inner Ø: 18 mm.
€8,75 €7,23
GRANIT Rubber elbow lower Ø 8/18/50/55 mm Fendt
GRANIT
Inner Ø: 8 / 18 / 50 / 55 mm. More
Inner Ø: 8 / 18 / 50 / 55 mm.
€220,38 €182,13 €209,35 €173,02
You save 5%
Turbocharger mounting kit Fendt Favorit 818, 822
€100,24 €82,84 €95,20 €78,68
You save 5%
Oil filler cap Fendt Favorit 816-926, Fendt 916-930, Xylon 520-524
Gaiter for intake pipe Fendt Favorit 816-824, 916-926
€160,75 €132,85 €152,70 €126,20
You save 5%
GRANIT Hose intercooler Fendt Favorit 816-926, Fendt 916-930
€93,85 €77,56 €89,15 €73,68
You save 5%
GRANIT Seal oil return line turbocharger 71 x 34 mm, Ø 20 mm Fendt
GRANIT
Hole Ø: 9 mm. Width: 34 mm. Weight: 4 g. Inner Ø: 20 mm. Length: 71 mm. Thickness: 1,05 mm. More
Hole Ø: 9 mm. Width: 34 mm. Weight: 4 g. Inner Ø: 20 mm. Length: 71 ...
€11,45 €9,46
O-ring turbocharger to the air filter Ø 100 x 4 mm Fendt
Weight: 6 g. Inner Ø: 100 mm. Thickness: 4 mm. More
Weight: 6 g. Inner Ø: 100 mm. Thickness: 4 mm.
€32,30 €26,69
Gasket set engine MAN D 0824 - D 0836 Fendt
Menke no.: 208926. More
Menke no.: 208926.
€74,48 €61,55 €70,75 €58,47
You save 5%
Gasket steering box engine MAN D 0824 - D 0836 Fendt
€74,95 €61,94 €71,20 €58,84
You save 5%
Crankshaft seal rear Ø 110 x 130 x 13 mm Fendt
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. Material: FPM (fluoro rubber)/ACM (polyacrylic rubber) / PTFE (polytetrafluoroethylene)/ACM (polyacr... More
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. Material: FPM (fluor...
€35,10 €29,01
GRANIT Injection line Fendt Favorit 816-920
Breather filter Fendt Favorit 816-926, GT 390, 395
€83,26 €68,81 €79,00 €65,29
You save 5%
GRAMMER Tractor seat Maximo XT Dynamic Plus MSG97AL/741 Fendt
GRAMMER
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Optional. Track gauge: 381 mm. Seat... More
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery typ...
€4.700,98 €3.885,11 €4.465,90 €3.690,83
You save 5%
Door lock, left Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€59,17 €48,90 €56,20 €46,45
You save 5%
GRANIT Handle Fendt Farmer 240 S (Typ 294), GT 380 (Typ 149)
€39,45 €32,60 €37,45 €30,95
You save 5%
Push rod 720 x 60 mm, eye Ø 25,4 mm, thread 27 x 3 mm Fendt
Dimensions: 720 x 60 mm. Eye Ø: 25.4 mm. Width: 60 mm. Thread: 27 x 3 mm. Length: 720 mm. More
Dimensions: 720 x 60 mm. Eye Ø: 25.4 mm. Width: 60 mm. Thread: 27 x 3...
€386,59 €319,50 €367,25 €303,51
You save 5%
GRANIT Pin support 20,3 x 130 mm Fendt
GRANIT
Dimensions: 20.3 x 130 mm. More
Dimensions: 20.3 x 130 mm.
€78,53 €64,90 €74,60 €61,65
You save 5%
Showing 361 - 384 of 549

Fendt Favorit 818 parts: switches, hoses, lights and seats

Most Favorit 818 tractors have plenty of hours behind them, and at that stage it is the details that keep you busy. A switch that sticks, a split coolant hose, a work lamp that gives up halfway through the evening. This page lists more than 550 new parts that fit the Favorit 818, from GRANIT, HELLA, GRAMMER, ROCKINGER, Wabco and others.

Switchgear in the cab

The consoles of the Favorit 818 carry a large number of push button and rocker switches, each with its own symbol. You can get these switches separately, together with the indicator symbols and the rubber surrounds. Work lamps with their holders and brackets are here too, as is an alternator to feed all those consumers.

Before you swap a rocker switch, take a photo of the back with every wire still in place. On illuminated switches the terminals sit close together, and a crossed wire only shows up once the function fails or the backlight stays on.

Cooling and engine

  • Coolant hoses, including moulded rubber elbows
  • Gaskets for the water channel
  • Seals for the fuel sensors
  • Discs, pins and bushes for pivots and linkages

Fit new hose clamps whenever you replace a coolant hose. Old clamps have bedded into the rubber and often fail to seal a fresh hose. Squeeze the old hose before throwing it away. If it feels soft or flaky inside, other hoses of the same age are likely in similar condition. After refilling, bleed the system and check the level again once the engine has been up to temperature.

If a work lamp keeps failing, look at its holder before blaming the lamp. A cracked bracket lets the lamp shake on every bump, and that vibration shortens its life considerably.

Seat and access

For the cab there are tractor seats, including air suspended models, along with gas struts and grab handles for the body panels. A loose handle is more than cosmetic, since you pull your full weight on it every time you climb in.

Finding the matching part

The Favorit 818 is part of the Fendt Favorit 800 series. The chassis number on the data plate helps, because parts can differ by production period within one series. Hoses, gaskets and switches often have a reference number moulded or printed on them, which is the quickest route to the right replacement.

Other Favorit 800 models

Each sister model has its own page with the parts for that tractor:

For all other Fendt tractors, see Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart