Menu
EUR

Fendt Favorit 818 tractor parts & technical data

With more than 550 parts for the Fendt Favorit 818, this page covers lighting, electrics, trailer couplings and more, so you can quickly see what fits.

549 parts found for Fendt Favorit 818
Show:
GRANIT Suction hose inner-Ø 130 mm Fendt Favorit 816-926
5%
GRANIT
Suction hose inner-Ø 130 mm Fendt Favorit 816-926
Inner Ø: 130 mm.
€74,95 €61,94 €71,20 €58,84
 
GRANIT Suction hose inner-Ø 120 mm Fendt Favorit 816-926
GRANIT
Suction hose inner-Ø 120 mm Fendt Favorit 816-926
Inner Ø: 120 mm.
€24,60 €20,33
 
Seal coolant pipe Fendt
Seal coolant pipe Fendt
Weight: 2 g.
€9,30 €7,69
 
GRANIT Holder for injection pump Fendt Favorit 816-920
5%
GRANIT
Holder for injection pump Fendt Favorit 816-920
€44,10 €36,45 €41,85 €34,59
 
Flange fuel pump Fendt Favorit 816-920, Xylon 520-524
5%
Flange fuel pump Fendt Favorit 816-920, Xylon 520-524
€374,33 €309,36 €355,60 €293,88
 
Reducing hose intercooler Fendt Favorit 816-926, Fendt 916-930
5%
Reducing hose intercooler Fendt Favorit 816-926, Fendt 916-930
€67,89 €56,11 €64,45 €53,26
 
GRANIT Seal lubricating pipe turbocharger 56 x 32 mm, Ø 16 mm Fendt
GRANIT
Seal lubricating pipe turbocharger 56 x 32 mm, Ø 16 mm Fendt
Hole Ø: 9 mm. Width: 32 mm. Weight: 3 g. Inner Ø: 16 mm. Length: 56 mm. Thicknes...
€13,65 €11,28
 
Turbocharger to the exhaust Fendt
5%
Turbocharger to the exhaust Fendt
€73,28 €60,56 €69,60 €57,52
 
Piston set, complete Ø 108 mm, combustion chamber Ø 62,48 mm Fendt
5%
Piston set, complete Ø 108 mm, combustion chamber Ø 62,48 mm Fendt
Dimensions: 3 rings, Ø 108 mm, Gudgeon pin Ø 40 x 90 mm, Combustion chamber Ø 62...
€309,22 €255,55 €293,75 €242,77
 
GRANIT Clamp lock Fendt
GRANIT
Clamp lock Fendt
€2,01 €1,66
 
GRANIT Exhaust valve guide Ø 10 x 16 mm, length 55 mm Fendt
5%
GRANIT
Exhaust valve guide Ø 10 x 16 mm, length 55 mm Fendt
€42,92 €35,47 €40,75 €33,68
 
Connecting rod bolt M12 x 1,5, 60 mm Fendt
Connecting rod bolt M12 x 1,5, 60 mm Fendt
Male thread: M12 x 1,5. Weight: 59 g. Thread: M12 x 1.5. Length: 60 mm. Weight: ...
€12,15 €10,04
 
GRANIT Cylinder head bolt M14 x 140 mm Fendt
GRANIT
Cylinder head bolt M14 x 140 mm Fendt
Dimensions: M14 x 140 mm.
€24,00 €19,83
 
GRANIT Profile clamp Fendt
5%
GRANIT
Profile clamp Fendt
€78,70 €65,04 €74,75 €61,78
 
GRANIT Crankshaft seal for Ø 66 x 90 x 12 mm Fendt
5%
GRANIT
Crankshaft seal for Ø 66 x 90 x 12 mm Fendt
Menke no.: 209364.
€38,80 €32,07 €36,85 €30,45
 
GRANIT Volume regulator Fendt, Deutz-Fahr
5%
GRANIT
Volume regulator Fendt, Deutz-Fahr
€169,05 €139,71 €160,55 €132,69
 
Steering valve 5/4 manual operated 210 bar, 90 l/min, M22 x 1,5 Deutz
5%
Steering valve 5/4 manual operated 210 bar, 90 l/min, M22 x 1,5 Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow: min. 90 l/min., ...
€875,25 €723,35 €831,45 €687,15
 
GRANIT Plate hinge mount rear window Fendt
GRANIT
Plate hinge mount rear window Fendt
€25,80 €21,32
 
Hammer head bolt M27 Fendt
5%
Hammer head bolt M27 Fendt
Menke no.: 208515.
€121,31 €100,26 €115,20 €95,21
 
Showing 505 - 528 of 549

Fendt Favorit 818 parts: switches, hoses, lights and seats

Most Favorit 818 tractors have plenty of hours behind them, and at that stage it is the details that keep you busy. A switch that sticks, a split coolant hose, a work lamp that gives up halfway through the evening. This page lists more than 550 new parts that fit the Favorit 818, from GRANIT, HELLA, GRAMMER, ROCKINGER, Wabco and others.

Switchgear in the cab

The consoles of the Favorit 818 carry a large number of push button and rocker switches, each with its own symbol. You can get these switches separately, together with the indicator symbols and the rubber surrounds. Work lamps with their holders and brackets are here too, as is an alternator to feed all those consumers.

Before you swap a rocker switch, take a photo of the back with every wire still in place. On illuminated switches the terminals sit close together, and a crossed wire only shows up once the function fails or the backlight stays on.

Cooling and engine

  • Coolant hoses, including moulded rubber elbows
  • Gaskets for the water channel
  • Seals for the fuel sensors
  • Discs, pins and bushes for pivots and linkages

Fit new hose clamps whenever you replace a coolant hose. Old clamps have bedded into the rubber and often fail to seal a fresh hose. Squeeze the old hose before throwing it away. If it feels soft or flaky inside, other hoses of the same age are likely in similar condition. After refilling, bleed the system and check the level again once the engine has been up to temperature.

If a work lamp keeps failing, look at its holder before blaming the lamp. A cracked bracket lets the lamp shake on every bump, and that vibration shortens its life considerably.

Seat and access

For the cab there are tractor seats, including air suspended models, along with gas struts and grab handles for the body panels. A loose handle is more than cosmetic, since you pull your full weight on it every time you climb in.

Finding the matching part

The Favorit 818 is part of the Fendt Favorit 800 series. The chassis number on the data plate helps, because parts can differ by production period within one series. Hoses, gaskets and switches often have a reference number moulded or printed on them, which is the quickest route to the right replacement.

Other Favorit 800 models

Each sister model has its own page with the parts for that tractor:

For all other Fendt tractors, see Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart