Menu
EUR

Fendt Favorit 822 tractor parts & technical data

With more than 550 parts, the Fendt Favorit 822 from the Favorit 800 series is well covered here. Lighting, electrics and trailer couplings are among them.

544 parts found for Fendt Favorit 822
Show:
Oil filler cap Fendt Favorit 816-926, Fendt 916-930, Xylon 520-524
Gaiter for intake pipe Fendt Favorit 816-824, 916-926
€160,75 €132,85 €152,70 €126,20
You save 5%
GRANIT Hose intercooler Fendt Favorit 816-926, Fendt 916-930
€93,85 €77,56 €89,15 €73,68
You save 5%
GRANIT Seal oil return line turbocharger 71 x 34 mm, Ø 20 mm Fendt
GRANIT
Hole Ø: 9 mm. Width: 34 mm. Weight: 4 g. Inner Ø: 20 mm. Length: 71 mm. Thickness: 1,05 mm. More
Hole Ø: 9 mm. Width: 34 mm. Weight: 4 g. Inner Ø: 20 mm. Length: 71 ...
€11,45 €9,46
O-ring feed pump Ø 32 x 2,5 mm Fendt
Weight: 0,6 g. Inner Ø: 32 mm. Thickness: 2,5 mm. More
Weight: 0,6 g. Inner Ø: 32 mm. Thickness: 2,5 mm.
€13,75 €11,36
Gasket set engine MAN D 0824 - D 0836 Fendt
Menke no.: 208926. More
Menke no.: 208926.
€74,48 €61,55 €70,75 €58,47
You save 5%
Gasket steering box engine MAN D 0824 - D 0836 Fendt
€74,95 €61,94 €71,20 €58,84
You save 5%
Crankshaft seal rear Ø 110 x 130 x 13 mm Fendt
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. Material: FPM (fluoro rubber)/ACM (polyacrylic rubber) / PTFE (polytetrafluoroethylene)/ACM (polyacr... More
Outer Ø: 130 mm. Width: 13 mm. Inner Ø: 110 mm. Material: FPM (fluor...
€35,10 €29,01
Breather filter Fendt Favorit 816-926, GT 390, 395
€83,26 €68,81 €79,00 €65,29
You save 5%
GRAMMER Tractor seat Maximo XT Dynamic Plus MSG97AL/741 Fendt
GRAMMER
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Optional. Track gauge: 381 mm. Seat... More
To fit: Fendt, new bracket. Suspension: Air suspension. Upholstery typ...
€4.700,98 €3.885,11 €4.465,90 €3.690,83
You save 5%
Door lock, left Fendt Farmer 307 (Typ 117), GT 380 (Typ 149)
€59,17 €48,90 €56,20 €46,45
You save 5%
GRANIT Handle Fendt Farmer 240 S (Typ 294), GT 380 (Typ 149)
€39,45 €32,60 €37,45 €30,95
You save 5%
Push rod 720 x 60 mm, eye Ø 25,4 mm, thread 27 x 3 mm Fendt
Dimensions: 720 x 60 mm. Eye Ø: 25.4 mm. Width: 60 mm. Thread: 27 x 3 mm. Length: 720 mm. More
Dimensions: 720 x 60 mm. Eye Ø: 25.4 mm. Width: 60 mm. Thread: 27 x 3...
€386,59 €319,50 €367,25 €303,51
You save 5%
GRANIT Pin support 20,3 x 130 mm Fendt
GRANIT
Dimensions: 20.3 x 130 mm. More
Dimensions: 20.3 x 130 mm.
€78,53 €64,90 €74,60 €61,65
You save 5%
Locking plate Fendt Favorit 816-926, Fendt 916-939
€127,05 €105,00 €120,65 €99,71
You save 5%
Seal Fendt Farmer 200-300
GRANIT Bracket front Fendt Farmer 240 S (Typ 294), Xylon 524
€39,08 €32,30 €37,10 €30,66
You save 5%
GRANIT Holder three-point Fendt
€16,70 €13,80
GRANIT Pin for linkage Fendt Favorit 816-926, Fendt 916-930
€54,61 €45,13 €51,85 €42,85
You save 5%
GRANIT Handle Fendt, Massey Ferguson
€36,65 €30,29
Showing 361 - 384 of 544

Fendt Favorit 822 parts for the cab, work lights and cooling

Plenty of Favorit 822 tractors have put in a long working life, and at that age it is the many small parts that keep the machine comfortable and usable. This page lists more than 550 parts that fit the Fendt Favorit 822, with GRANIT next to HELLA, Wabco, GRAMMER and ROCKINGER.

At this age it is rarely the big assemblies that cause grief, but the many small things together: a loose grab handle, a switch that no longer springs back, a hose that sweats. Replacing those in time keeps the Favorit 822 pleasant and safe to work with, especially for anyone who spends long days in the cab.

Cooling system

Radiator hoses, including a lower rubber elbow, gaskets for the water channel and seals for the tank sensor keep the engine and cooling circuit tight. For keeping the battery topped up, a choice of alternators is available too. After replacing a coolant hose, top up with the correct type of coolant and let the engine warm up with the cap off until no more bubbles rise. Trapped air is a common reason for an engine that runs hot right after a hose change.

Inside the cab

Getting in and out every day wears down a lot of cab parts. There are air suspended tractor seats such as the Maximo Professional, handles, push buttons, rocker switches and indicator symbols for the switch panel. Gas struts hold the windscreen frame and the doors open, and a separate disc is available for the rear screen hinge. Rubber discs and pins round things off. Replace the windscreen frame struts as a pair so the frame is not pulled out of line.

Work lamps and brackets

Work lamps come in many versions, for example an angular spotlight for flush mounting, along with holders and brackets to fit them. When you change a lamp, clean the plug and the earth connection too. Weak or flickering light is very often caused by a corroded contact rather than by the lamp itself.

Type plate and related models

Look at the type plate to confirm you have a Favorit 822. After that, a reference number on the old part is the surest guide. The tractor belongs to the Fendt Favorit 800 series, and the related types from that series have their own pages: Fendt Favorit 816 and Fendt Favorit 818. For every other tractor of the make, head to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart