Menu
EUR

Fendt Favorit 822 tractor parts & technical data

With more than 550 parts, the Fendt Favorit 822 from the Favorit 800 series is well covered here. Lighting, electrics and trailer couplings are among them.

544 parts found for Fendt Favorit 822
Show:
Master brake cylinder Ø 22,2 mm, Pentosin Fendt
Medium: Pentosin. Hole Ø: 22.2 mm. More
Medium: Pentosin. Hole Ø: 22.2 mm.
€289,54 €239,29 €275,00 €227,27
You save 5%
Wabco Cover antifreeze pump Fendt, Massey Ferguson, Case IH
€62,07 €51,30 €58,95 €48,72
You save 5%
Double brake reservoir Fendt
€96,35 €79,63 €91,50 €75,62
You save 5%
Shim Ø 227 x 150 mm, 2,5 mm thick Fendt
Dimensions: Outer Ø 227, Inner Ø 150, 2.5 thick mm. More
Dimensions: Outer Ø 227, Inner Ø 150, 2.5 thick mm.
€73,24 €60,53 €69,55 €57,48
You save 5%
GRANIT PTO shaft end piece 1 3/4 inch, 20 splines Fendt, Massey Ferguson
GRANIT
Version: 1 3/4", 20 grooves. More
Version: 1 3/4", 20 grooves.
€288,39 €238,34 €273,95 €226,41
You save 5%
PTO shaft end piece 1 3/8 inch, 21 splines Fendt, Valtra-Valmet
Version: 1 3/8", 21 splines. More
Version: 1 3/8", 21 splines.
€343,36 €283,77 €326,15 €269,55
You save 5%
Sealing ring shifting Ø 25 x 32 x 4 mm Fendt
Dimensions: Ø 25 x 32 x 4. More
Dimensions: Ø 25 x 32 x 4.
€9,45 €7,81
FAG Angular contact ball bearing Ø 15 x 35 mm Fendt Favorit 816-926, 916-930
FAG
Ø D: 35 mm. Outer Ø: 35 mm. B: 15,9 mm. Material: steel. Ø d: 15 mm. More
Ø D: 35 mm. Outer Ø: 35 mm. B: 15,9 mm. Material: steel. Ø d: 15 mm
€87,77 €72,54 €83,35 €68,88
You save 5%
MAHLE Cooling fan Ø 560 mm, 9 fan sheets Fendt Favorit 816-926
MAHLE
Ø: 560 mm. Technical data: Number of fan blades: 9. More
Ø: 560 mm. Technical data: Number of fan blades: 9.
€329,25 €272,11 €205,75 €170,04
You save 38%
Pump housing engine oil pump Fendt Favorit 822-926, Fendt 916-926
€444,35 €367,23 €422,10 €348,84
You save 5%
Special stud bolt M10, 25 mm Fendt Favorit 816-926, Fendt 916-926
Version: Thread M10, Length: 25 mm. Thread: M10. Length: 25 mm. More
Version: Thread M10, Length: 25 mm. Thread: M10. Length: 25 mm.
€5,60 €4,63
GRANIT Push rod Fendt
€47,60 €39,34
Reservoir radiator Fendt Favorit 816-824, 916-926
€1.030,77 €851,88 €979,20 €809,26
You save 5%
GRANIT Fan cowl Fendt Favorit 816-824, 916-926
GRANIT Spring V-belt tensioner 130 mm Fendt
GRANIT
Weight: 268,5 g. Length: 130 mm. More
Weight: 268,5 g. Length: 130 mm.
€319,75 €264,26 €303,75 €251,03
You save 5%
GRANIT Radiator hose Ø 18 mm, length 1000 mm Fendt
GRANIT
Inner Ø: 18 mm. Length: 1000 mm. More
Inner Ø: 18 mm. Length: 1000 mm.
€42,05 €34,75 €39,90 €32,98
You save 5%
Idler pulley Ø 80 mm, height 46 mm Fendt
€304,77 €251,88 €289,50 €239,26
You save 5%
Showing 409 - 432 of 544

Fendt Favorit 822 parts for the cab, work lights and cooling

Plenty of Favorit 822 tractors have put in a long working life, and at that age it is the many small parts that keep the machine comfortable and usable. This page lists more than 550 parts that fit the Fendt Favorit 822, with GRANIT next to HELLA, Wabco, GRAMMER and ROCKINGER.

At this age it is rarely the big assemblies that cause grief, but the many small things together: a loose grab handle, a switch that no longer springs back, a hose that sweats. Replacing those in time keeps the Favorit 822 pleasant and safe to work with, especially for anyone who spends long days in the cab.

Cooling system

Radiator hoses, including a lower rubber elbow, gaskets for the water channel and seals for the tank sensor keep the engine and cooling circuit tight. For keeping the battery topped up, a choice of alternators is available too. After replacing a coolant hose, top up with the correct type of coolant and let the engine warm up with the cap off until no more bubbles rise. Trapped air is a common reason for an engine that runs hot right after a hose change.

Inside the cab

Getting in and out every day wears down a lot of cab parts. There are air suspended tractor seats such as the Maximo Professional, handles, push buttons, rocker switches and indicator symbols for the switch panel. Gas struts hold the windscreen frame and the doors open, and a separate disc is available for the rear screen hinge. Rubber discs and pins round things off. Replace the windscreen frame struts as a pair so the frame is not pulled out of line.

Work lamps and brackets

Work lamps come in many versions, for example an angular spotlight for flush mounting, along with holders and brackets to fit them. When you change a lamp, clean the plug and the earth connection too. Weak or flickering light is very often caused by a corroded contact rather than by the lamp itself.

Type plate and related models

Look at the type plate to confirm you have a Favorit 822. After that, a reference number on the old part is the surest guide. The tractor belongs to the Fendt Favorit 800 series, and the related types from that series have their own pages: Fendt Favorit 816 and Fendt Favorit 818. For every other tractor of the make, head to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart