Menu
EUR

Fendt Favorit 822 tractor parts & technical data

With more than 550 parts, the Fendt Favorit 822 from the Favorit 800 series is well covered here. Lighting, electrics and trailer couplings are among them.

544 parts found for Fendt Favorit 822
Show:
GRANIT Fender extension right Fendt
€127,65 €105,50
GRANIT Sealing washer 32 x 45 x 4 mm Fendt
GRANIT
Dimensions: 32 x 45 x 4 mm. More
Dimensions: 32 x 45 x 4 mm.
€8,55 €7,07
GRANIT Blind cover for headlight panel Fendt
GRANIT Potentiometer rotary function for control unit EHR
GRANIT
Version: For electronic linkage control unit. More
Version: For electronic linkage control unit.
€96,80 €80,00
GRANIT Oil pressure switch hydraulic oil
GRANIT
Version: Hydraulic oil. More
Version: Hydraulic oil.
€96,85 €80,04
Symbol front work light black / white
Version: Black/white, front work light. More
Version: Black/white, front work light.
€20,00 €16,53
Symbol rear work light black / white
Version: Black/white, rear work light. More
Version: Black/white, rear work light.
€6,95 €5,74
HELLA Symbol air conditioning green
HELLA
Version: Green, air conditioning. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Klimaanlage. More
Version: Green, air conditioning. Colour: grün. To fit: HELLA Schalte...
€2,88 €2,38
HELLA Symbol indicator right / left green
HELLA
Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Blinker rechts/links. More
Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Bl...
€2,88 €2,38
Cobo Reversing warning system 12 / 24 V, 85 dB, 2900 Hz, continuous or pulsating
Cobo
Nominal voltage: 12 / 24 V. Volume: 85 dB. Frequency: 2900 Hz. Connection: Blade terminal. Cable length: - m. Protection class: IP65. Dimensions L x W... More
Nominal voltage: 12 / 24 V. Volume: 85 dB. Frequency: 2900 Hz. Connect...
€64,72 €53,49 €58,55 €48,39
You save 10%
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 mm. Light function: Close-range illumination. Bulb: H3. Material: Hous... More
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x ...
€60,65 €50,12
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Far-reaching illumination. Connection: AMP plug. Bulb: 12... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€51,14 €42,26 €46,25 €38,22
You save 10%
HELLA Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
HELLA
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Material: Plastic. Depth: 7 mm. Fixing: Horizontal. Installation location: Left, right.... More
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Materia...
€1,96 €1,62
Cobo Work lamp H3 55 / 70 W, square, 178 x 86 x 73 mm, 12 / 24 V
Cobo
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Dimensions W x H x D: 178 x 86 x 73 mm. Nominal voltage: 12 / 24 V. Cable length: 250 mm. Pow... More
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Dimensions W ...
€59,80 €49,42 €54,10 €44,71
You save 10%
Relays make contact 12 V / 70 A, 4-pin, 6,3 mm, with holder
Version: 12 V / 70 A, with bracket, 4-pin, blade terminal 6.3 mm, With blocking diode, parallel resistor for suppressing inductive interference voltag... More
Version: 12 V / 70 A, with bracket, 4-pin, blade terminal 6.3 mm, With...
€27,50 €22,73
Alternator 14 V / 150 A, form B, flange 56,0 mm
To fit as: Fendt, Hürlimann, Lamborghini, Same More
To fit as: Fendt, Hürlimann, Lamborghini, Same
€626,14 €517,47 €566,50 €468,18
You save 10%
MANN-FILTER Oil filter H724/3, HF35436
€120,89 €99,91 €75,50 €62,40
You save 38%
HELLA Work lamp flood beam Double Beam H3 12 / 24 V, built-in, Fendt
HELLA
Light aperture (mm): 148 x 84 | Type: Double Beam H3 | Additional information: - Double reflector | Nominal voltage (V): 12 / 24 | Form: Rectangular |... More
Light aperture (mm): 148 x 84 | Type: Double Beam H3 | Additional info...
€72,80 €60,17
Danfoss Orbitrol 4WD OSPC 150 LSR, 150 cm³ Fendt Favorit 816 - 926
Danfoss
Saugventil: Yes | Feedback: Load sensing without feedback | Schluckvolumen bei Not-Lenkung (ccm³): 150 | Rechts-Anschluß: M18x1.5 countersink | P ma... More
Saugventil: Yes | Feedback: Load sensing without feedback | Schluckvol...
€1.352,56 €1.117,82 €1.284,90 €1.061,90
You save 5%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€448,64 €370,78 €280,40 €231,74
You save 38%
Bearing vane connection 90 x 140 x 24 mm Fendt
Inner Ø (mm): 90 | Height 1 (mm): 24 | Outer Ø (mm): 140 | Dimensions (mm): 90 x 140 x 24 More
Inner Ø (mm): 90 | Height 1 (mm): 24 | Outer Ø (mm): 140 | Dimension...
€110,96 €91,70 €105,40 €87,11
You save 5%
GRANIT Oil seal turbo 65 x 85 x 10 mm Fendt Favorit 509 - 824
GRANIT
Dimensions (mm): 65 x 85 x 10 More
Dimensions (mm): 65 x 85 x 10
€219,40 €181,32 €208,40 €172,23
You save 5%
Showing 169 - 192 of 544

Fendt Favorit 822 parts for the cab, work lights and cooling

Plenty of Favorit 822 tractors have put in a long working life, and at that age it is the many small parts that keep the machine comfortable and usable. This page lists more than 550 parts that fit the Fendt Favorit 822, with GRANIT next to HELLA, Wabco, GRAMMER and ROCKINGER.

At this age it is rarely the big assemblies that cause grief, but the many small things together: a loose grab handle, a switch that no longer springs back, a hose that sweats. Replacing those in time keeps the Favorit 822 pleasant and safe to work with, especially for anyone who spends long days in the cab.

Cooling system

Radiator hoses, including a lower rubber elbow, gaskets for the water channel and seals for the tank sensor keep the engine and cooling circuit tight. For keeping the battery topped up, a choice of alternators is available too. After replacing a coolant hose, top up with the correct type of coolant and let the engine warm up with the cap off until no more bubbles rise. Trapped air is a common reason for an engine that runs hot right after a hose change.

Inside the cab

Getting in and out every day wears down a lot of cab parts. There are air suspended tractor seats such as the Maximo Professional, handles, push buttons, rocker switches and indicator symbols for the switch panel. Gas struts hold the windscreen frame and the doors open, and a separate disc is available for the rear screen hinge. Rubber discs and pins round things off. Replace the windscreen frame struts as a pair so the frame is not pulled out of line.

Work lamps and brackets

Work lamps come in many versions, for example an angular spotlight for flush mounting, along with holders and brackets to fit them. When you change a lamp, clean the plug and the earth connection too. Weak or flickering light is very often caused by a corroded contact rather than by the lamp itself.

Type plate and related models

Look at the type plate to confirm you have a Favorit 822. After that, a reference number on the old part is the surest guide. The tractor belongs to the Fendt Favorit 800 series, and the related types from that series have their own pages: Fendt Favorit 816 and Fendt Favorit 818. For every other tractor of the make, head to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart