Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Fiat 480

Looking for parts for your Fiat 480 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

89 parts found for Fiat 480
Show:
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
5%
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
To fit as: Antonio Carraro, Fiat, Lamborghini
€184,65 €152,60 €175,40 €144,96
 
Clamping nut three-point M16 right-hand and left-hand thread Fiat 312-640
Clamping nut three-point M16 right-hand and left-hand thread Fiat 312-640
Dimensions: 1 x right-hand thread and 1 x left-hand thread M16 mm.
€29,15 €24,09
 
Starter motor 12 V, 2,7 kW, 9 teeth, Ø 110 mm, angle l 60
10%
Starter motor 12 V, 2,7 kW, 9 teeth, Ø 110 mm, angle l 60
To fit as: Fiat, Ford, New Holland, Steyr
€454,53 €375,64 €411,20 €339,83
 
Radiator hose, bottom Ø 37 / 44 mm, length 115 mm Fiat
Radiator hose, bottom Ø 37 / 44 mm, length 115 mm Fiat
Inner Ø: 37 / 44 mm. Length: 115 mm.
€23,25 €19,21
 
Coolant pipe lower outer-Ø 38 mm, M16 x 1,5 Fiat 450-1000
Coolant pipe lower outer-Ø 38 mm, M16 x 1,5 Fiat 450-1000
Dimensions: Outer Ø 38, Fitting M16 x 1.5 mm. Outer Ø: 38 mm.
€21,90 €18,10
 
GRANIT Seal cylinder 112 x 113 x 0,5 mm Ford, Fiat
GRANIT
Seal cylinder 112 x 113 x 0,5 mm Ford, Fiat
Dimensions: 112 x 113 x 0.5 mm.
€13,00 €10,74
 
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
46%
FEBI
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
 
GRANIT Drive shaft 820 mm, M18 x 1,5 / M16 x 1
GRANIT
Drive shaft 820 mm, M18 x 1,5 / M16 x 1
Version: Thread: M18 x 1.5 / M16 x 1.
€33,30 €27,52
 
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49...
€39,15 €32,36
 
Bosch/Rexroth Hydraulic pump anticlockwise 8 cm³, taper 1:8 Ø 17,46 mm, NBR Fiat
5%
Bosch/Rexroth
Hydraulic pump anticlockwise 8 cm³, taper 1:8 Ø 17,46 mm, NBR Fiat
Output volume: 8 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Operating pressure max...
€438,87 €362,70 €416,90 €344,55
 
Track rod 480 mm, M20 x 1, taper 15 - 16 mm, M14 x 1,5
5%
Track rod 480 mm, M20 x 1, taper 15 - 16 mm, M14 x 1,5
A: 500 - 800 mm. B: M20 x 1 mm. C: 15 - 16 mm. G: . D: M14 x 1,5 mm. E: 26 mm. F...
€96,17 €79,48 €91,35 €75,50
 
GRANIT Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
5%
GRANIT
Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22...
€51,53 €42,59 €48,95 €40,45
 
Exhaust manifold Fiat 350-6218
Exhaust manifold Fiat 350-6218
€38,10 €31,49
 
GRANIT Indicator switch left and right, 6 blade connections
10%
GRANIT
Indicator switch left and right, 6 blade connections
Version: Functions: centre position off, indicator left and right, 6 blade termi...
€72,70 €60,08 €65,75 €54,34
 
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
49%
FEBI
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65...
€30,67 €25,35 €15,73 €13,00
 
GRANIT Ball joint 385 mm, M14 x 1,5, 19,7 mm, taper 14,8 - 15,9 mm
5%
GRANIT
Ball joint 385 mm, M14 x 1,5, 19,7 mm, taper 14,8 - 15,9 mm
A: 385 mm. C: M14 x 1,5 mm. D: 19,7 mm. E: 14,8 mm. F: 15,9 mm. Taper: 14,8 - 15...
€37,99 €31,40 €36,00 €29,75
 
Ball joint 92 mm, M14 x 1,5, M20 x 1, taper 14,8 - 15,9 mm
Ball joint 92 mm, M14 x 1,5, M20 x 1, taper 14,8 - 15,9 mm
A: 92 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 14,8 mm. F: 15,9 mm. Taper: 14,8 - ...
€28,00 €23,14
 
Gear lever knob thread M14 x 1,5 Ford, Fiat
Gear lever knob thread M14 x 1,5 Ford, Fiat
Version: Thread M14 x 1,5.
€6,55 €5,41
 
GRANIT Radiator hose, bottom inner-Ø 35 mm, length 80 mm
GRANIT
Radiator hose, bottom inner-Ø 35 mm, length 80 mm
Inner Ø: 35 mm. Length: 80 mm.
€4,84 €4,00
 
GRANIT Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
Ø: 54 mm. Temperature: 79 °C.
€23,30 €19,26
 
Water pump with gasket Fiat engine 8035.01-8065.02
5%
Water pump with gasket Fiat engine 8035.01-8065.02
To fit: Fiat. Version: With gasket.
€122,36 €101,12 €116,20 €96,03
 
Showing 1 - 24 of 89

Parts for your Fiat 480 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Fiat 480. We also offer the right parts for all other tractor types from Fiat. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Fiat 480. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Fiat 480. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Fiat

Fiat was founded in Turin, Italy, in 1899 by Giovanni Agnelli, an industrialist. Fiat stands for Fabricca Italiana Automobili Torino. The company started by producing cars and trucks. Later, stationary and marine engines, railway equipment, and even airplanes were built.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart