Menu
EUR

Fiat 55-90 tractor parts & technical data

Lighting, trailer couplings, brake parts and transmission parts: for the Fiat 55-90 from the 90 series, more than 200 parts are listed on a single model page.

215 parts found for Fiat 55-90
Show:
GRANIT Bush 10 teeth Fiat Series 46 - 94, L 60-95, New Holland TN95
€42,65 €35,25 €40,50 €33,47
You save 5%
GRANIT Cylinder hydraulic steering Fiat Series 46-90
€462,12 €381,92 €439,00 €362,81
You save 5%
GRANIT Track rod without four-wheel drive A 1165 mm, B M20 x 1,5, E 34 mm
GRANIT
A: 1070 - 1300 mm. B: M20 x 1,5 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 mm. E: 34 mm. F: 22,5 mm. More
A: 1070 - 1300 mm. B: M20 x 1,5 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 m...
€275,31 €227,53 €261,50 €216,12
You save 5%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€105,50 €87,19 €100,20 €82,81
You save 5%
GRANIT Radiator hose, bottom inner-Ø 35 mm, length 80 mm
GRANIT
Inner Ø: 35 mm. Length: 80 mm. More
Inner Ø: 35 mm. Length: 80 mm.
€4,84 €4,00
GRANIT Tank cap tank collar Ø 60 mm, thread Ø 58 / 60 mm
GRANIT
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm. More
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm.
€31,20 €25,79
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
You save 21%
Start safety switch make contact M14 x 1,5
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug connector. More
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug c...
€25,70 €21,24
Alternator 14 V / 65 A, form A, flange 70,0 mm, pulley-Ø 90,0 mm
To fit as: Case IH, Fiat, Laverda, New Holland More
To fit as: Case IH, Fiat, Laverda, New Holland
€297,94 €246,23 €269,55 €222,77
You save 10%
HELLA Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
HELLA
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14 | Additional information: With pulley | Pulley Ø (mm): 93 | Nominal values (V ... More
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14...
€292,84 €242,02 €235,40 €194,55
You save 20%
LUK Clutch kit double plate connection without release bearing, 30,60 kg
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228007717, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€808,50 €668,18 €768,00 €634,71
You save 5%
HELLA Alternator 12 V, 55 A, pulley Ø 82 mm, 9 teeth
HELLA
No. of grooves: 1 | Nominal power (kW): 55 | Flange size (mm): 76 | Nominal voltage (V): 12 | Nominal values (V / A): 12 / 55 | Direction of rotation:... More
No. of grooves: 1 | Nominal power (kW): 55 | Flange size (mm): 76 | No...
€254,54 €210,36 €204,65 €169,13
You save 20%
Silencer vertical 680 mm, inner Ø 45 mm Ford, Fiat
Version: Length: 680 mm, Inner Ø: 45 mm. More
Version: Length: 680 mm, Inner Ø: 45 mm.
€77,89 €64,37 €73,95 €61,12
You save 5%
GRANIT Spacer spring
GRANIT
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66, 50-66, 50-66S, 55-66, 55-66F, 55-66S, 56-66S, 60-66, 60-66S, 60-66F, 65-66, 65... More
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66...
€23,75 €19,63
GRANIT Brake light switch mechanical make contact, M3-5, 12 / 24 V
GRANIT
To fit as: Case IH 323, 353, E 353, 383, 423, E 423, 433, 453, 533, 633, 733, 833 523, 553, 554, 654, 724, 824, Fiat 35-66, 45-66, 45-66S, 50-66, 50-6... More
To fit as: Case IH 323, 353, E 353, 383, 423, E 423, 433, 453, 533, 63...
€35,00 €28,93
GRANIT Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
GRANIT
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade terminal 6.3 mm, Colour: white. To fit: BMW, Mercedes-Benz. More
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade t...
€25,60 €21,16
Starter switch 12 V, blade terminal, parking light, Ø 40 mm
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Housing Ø 40 mm. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€27,50 €22,73
Cobo Lamp glass left
Cobo
Installation location: Left. Menke no.: 55039. More
Installation location: Left. Menke no.: 55039.
€27,80 €22,98
Cobo Rear light left 169 x 62 x 90 mm, 12 V, hole spacing 132 mm
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Plug. Width: 169 mm. Form: Rectangular. Height: 62 mm. Cable length: 0.11 m. Hole spacing: 132 mm. Dim... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Plug. Width: 169 mm. F...
€44,23 €36,55 €42,00 €34,71
You save 5%
Tube exhaust curved vertical enamelled 700 mm, Ø 49 mm Fiat
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-46, 60-46, 65-46, 55-56, 60-56, 65-56, 70-56, 55-60, 45-66, 50-66, 55-66, 60-66, ... More
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-4...
€47,88 €39,57 €45,45 €37,56
You save 5%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.663,76 €1.375,01 €1.580,55 €1.306,24
You save 5%
Showing 25 - 48 of 215

Fiat 55-90 parts for clutch, hydraulics and engine

A Fiat 55-90 has often done plenty of hours by now, and the familiar jobs come round: a slipping clutch, a linkage that creeps down, an alternator that stops charging. This page lists more than 200 replacement parts that fit the type, from GRANIT, Cobo, LUK, Walterscheid, Bosch/Rexroth and others.

Clutch work

For the clutch there are clutch kits and thrust bearings for the driving clutch, plus bushes and spacers. If you split the tractor to reach the clutch, always replace the thrust bearing at the same time. The bearing costs little compared with the labour, and one that starts to whine shortly after the repair means splitting the tractor all over again. While it is apart, check the rear crankshaft seal for leaks.

Hydraulic pump and lift shaft

Hydraulic pumps and seals are available, including lift shaft sealing rings. A linkage that slowly drops with a heavy implement attached often points to internal leakage, while a leaking lift shaft seal shows as oil running down the outside of the housing.

When changing the pump, renew the filter and check the oil as well, so debris from the old pump does not go straight into the new one. Mind the direction of rotation when fitting it.

Engine, cooling and electrics

Around the engine you will find gaskets, sealing rings, O-rings and thermostats. A sticking thermostat leaves the engine running too cold or too hot. Alternators, rocker switches for the dashboard and lamp glass for the lights are listed too, as is a curved, enamelled exhaust tube.

An alternator tip: disconnect the battery before you undo the charging cable. A spanner touching the block while the cable is live throws sparks and can damage the wiring or the new alternator. After fitting, use a multimeter to check that the charging voltage rises at idle and with the revs up.

Choosing the right part

The type plate tells you whether the tractor really is a 55-90. After that, the reference number on the old part is the quickest route. For a clutch, measure the diameter of the old disc and compare it with the details on this page. For lamp glass, check which side the glass sits on.

The 55-90 sits in the Fiat 90 series, and the other tractors in that line each have a page of their own:

All other models of the brand can be reached from Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart