Menu
EUR

Fiat 65-90 tractor parts & technical data

More than 200 parts for the Fiat 65-90 on one page. They include lighting, trailer couplings and electrics, so the right spare for your tractor is easy to find.

246 parts found for Fiat 65-90
Show:
GRANIT Cylinder head gasket 1,43 mm Case IH, Fiat, New Holland
GRANIT
Thickness: 1,43 mm. More
Thickness: 1,43 mm.
€36,15 €29,88
GRANIT Temperature sensor thread M22 x 1,5, 25-100 °C
GRANIT
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C. More
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C.
€18,85 €15,58
Cobo Replacement key plastic-coated black
Cobo
Version: To fit: Case IH, Fiat, Volvo + Cobo: 22714132000, 22714159000. More
Version: To fit: Case IH, Fiat, Volvo + Cobo: 22714132000, 22714159000...
€13,30 €10,99
Bolt set steering valve M10 x 120 Fiat, New Holland
SACHS Double clutch 280/280 TGU 6, 35 x 40 mm, 14 splines, sintered
SACHS
Material specifications: Sintered clutch lining | Dimensions (mm): 35 x 40, 14 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 35 ...
€726,10 €600,08 €689,75 €570,04
You save 5%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€630,00 €520,66 €590,60 €488,10
You save 6%
GRANIT Bush 10 teeth Fiat Series 46 - 94, L 60-95, New Holland TN95
€42,65 €35,25 €40,50 €33,47
You save 5%
GRANIT Track rod without four-wheel drive A 1165 mm, B M20 x 1,5, E 34 mm
GRANIT
A: 1070 - 1300 mm. B: M20 x 1,5 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 mm. E: 34 mm. F: 22,5 mm. More
A: 1070 - 1300 mm. B: M20 x 1,5 mm. C: 16 - 18 mm. G: . D: M14 x 1,5 m...
€275,31 €227,53 €261,50 €216,12
You save 5%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€105,50 €87,19 €100,20 €82,81
You save 5%
GRANIT Radiator hose, bottom inner-Ø 35 mm, length 80 mm
GRANIT
Inner Ø: 35 mm. Length: 80 mm. More
Inner Ø: 35 mm. Length: 80 mm.
€4,84 €4,00
GRANIT Tank cap tank collar Ø 60 mm, thread Ø 58 / 60 mm
GRANIT
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm. More
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm.
€31,20 €25,79
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
You save 21%
Start safety switch make contact M14 x 1,5
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug connector. More
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug c...
€25,70 €21,24
Alternator 14 V / 65 A, form A, flange 70,0 mm, pulley-Ø 90,0 mm
To fit as: Case IH, Fiat, Laverda, New Holland More
To fit as: Case IH, Fiat, Laverda, New Holland
€297,94 €246,23 €269,55 €222,77
You save 10%
HELLA Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
HELLA
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14 | Additional information: With pulley | Pulley Ø (mm): 93 | Nominal values (V ... More
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14...
€292,84 €242,02 €235,40 €194,55
You save 20%
LUK Clutch kit double plate connection without release bearing, 30,60 kg
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228007717, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€808,50 €668,18 €768,00 €634,71
You save 5%
HELLA Alternator 12 V, 55 A, pulley Ø 82 mm, 9 teeth
HELLA
No. of grooves: 1 | Nominal power (kW): 55 | Flange size (mm): 76 | Nominal voltage (V): 12 | Nominal values (V / A): 12 / 55 | Direction of rotation:... More
No. of grooves: 1 | Nominal power (kW): 55 | Flange size (mm): 76 | No...
€254,54 €210,36 €204,65 €169,13
You save 20%
Silencer vertical 680 mm, inner Ø 45 mm Ford, Fiat
Version: Length: 680 mm, Inner Ø: 45 mm. More
Version: Length: 680 mm, Inner Ø: 45 mm.
€77,89 €64,37 €73,95 €61,12
You save 5%
GRANIT Brake light switch mechanical make contact, M3-5, 12 / 24 V
GRANIT
To fit as: Case IH 323, 353, E 353, 383, 423, E 423, 433, 453, 533, 633, 733, 833 523, 553, 554, 654, 724, 824, Fiat 35-66, 45-66, 45-66S, 50-66, 50-6... More
To fit as: Case IH 323, 353, E 353, 383, 423, E 423, 433, 453, 533, 63...
€35,00 €28,93
GRANIT Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
GRANIT
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade terminal 6.3 mm, Colour: white. To fit: BMW, Mercedes-Benz. More
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade t...
€25,60 €21,16
Starter switch 12 V, blade terminal, parking light, Ø 40 mm
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Housing Ø 40 mm. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€27,50 €22,73
Cobo Lamp glass left
Cobo
Installation location: Left. Menke no.: 55039. More
Installation location: Left. Menke no.: 55039.
€27,80 €22,98
Showing 25 - 48 of 246

Fiat 65-90 parts for the clutch, charging system and seals

Plenty of Fiat 65-90 tractors are still doing a full day's work, and sooner or later one needs a clutch, an alternator or a cure for a leaking lift shaft. For this model there are more than 200 replacement parts on this page, from GRANIT, Cobo, LUK, MAHLE and Walterscheid.

Doing the clutch while the tractor is split

Splitting a 65-90 takes time, so it pays to do the whole job in one go. You will find double clutch assemblies, complete clutch kits and separate thrust bearings. Always replace the thrust bearing with the clutch. If an old bearing starts to whine a few months later, the tractor has to come apart again. While it is open, check the flywheel for scoring and heat spots and renew the crankshaft seal if it is already weeping.

Alternators and gear reduction starters

There are several alternators for the charging side. If the engine is slow to turn over, a gear reduction starter is worth considering, as it delivers more torque from less current than a direct drive starter. In the cab you will find rocker switches, and for the lights there are lamp glasses. When fitting a new alternator, clean the earth strap and the battery terminals as well, because a poor connection is often the real reason a battery keeps going flat.

Tracking down oil leaks

Oil under the rear axle often comes from the lift shaft seal. We carry that seal along with gaskets, for instance for the oil sump, sealing rings for the lift cylinder piston and O-rings for the brake cylinder. For the cooling circuit there are thermostats with their O-ring. Ball joints for the steering, drawbars and an exhaust tube complete the picture.

  • double clutches, clutch kits and thrust bearings
  • alternators and gear reduction starters
  • seals, gaskets, sealing rings and O-rings
  • ball joints, thermostats and lamp glasses

Making sure it fits your 65-90

Check the type plate to confirm the model and note the serial number. For clutch parts and alternators, the number on the old part matters just as much, because different versions were fitted over the years. Compare that number with the product details and ask us if anything does not add up.

Within the Fiat 90 series, the 65-90 sits among several related models. Other models in that series have their own pages with the parts that fit them: Fiat 55-90, Fiat 60-90, Fiat 80-90, Fiat 90-90, Fiat 100-90 and Fiat 110-90. The Fiat 85-90 is part of the same series too. Fiat tractors outside this series are listed under Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart