Menu
EUR

Fiat 70-66 tractor parts & technical data

Keep your Fiat 70-66 working. This overview shows more than 250 items for the 66 series, from lighting and electrics to brakes and transmission.

251 parts found for Fiat 70-66
Show:
Plastic fitting Ø 31 mm Ford, Fiat
Dimensions: Ø 31 mm. More
Dimensions: Ø 31 mm.
€25,86 €21,37
O-ring 25 x 3,53 mm Ford, Case IH, Fiat, New Holland
Dimensions: 25 x 3.53 mm. More
Dimensions: 25 x 3.53 mm.
€1,90 €1,57
Oil sump gasket set 4-cylinder engine 8045.01-8045.25 Fiat
€32,63 €26,97 €30,02 €24,81
You save 8%
Seal oil pump Ford, Fiat
Silencer vertical 680 mm, inner Ø 45 mm Ford, Fiat
Version: Length: 680 mm, Inner Ø: 45 mm. More
Version: Length: 680 mm, Inner Ø: 45 mm.
€81,28 €67,17 €74,78 €61,80
You save 8%
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., taper 1:8, Ø 17,46 mm, clockwise
Bosch/Rexroth
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Bosch no.: 0510525046. More
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€459,16 €379,47 €422,43 €349,11
You save 8%
Bosch/Rexroth Hydraulic pump clockwise 19 cm³/rpm., taper 1:8, Ø 17,46 mm
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Line connection suction side: Ø 40mm, 4-Loch, M8. Line conn... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€436,15 €360,45 €401,26 €331,62
You save 8%
Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
Dimensions: 25 x 42 x 24 mm. More
Dimensions: 25 x 42 x 24 mm.
€27,15 €22,44
Pin Ø 20 mm, length 60 mm Fiat
Dimensions: Length = 60, Ø = 20 mm. More
Dimensions: Length = 60, Ø = 20 mm.
€8,59 €7,10
Sealing ring piston 110 x 114 x 4 mm Fiat, Ford, New Holland
Dimensions: 110 x 114 x 4 mm. More
Dimensions: 110 x 114 x 4 mm.
€18,21 €15,05
Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
€2,99 €2,47
Holder right Fiat Series 66-94
€57,85 €47,81 €53,22 €43,99
You save 8%
Cobo Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Cobo
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, 24 V / 20 A inductive, IP40. Reference no.: 336.019.006. More
Version: For flush mounting, make contact, normally off, 12 V / 30 A i...
€21,41 €17,70
Cobo Replacement key plastic-coated black
Cobo
Version: To fit: Case IH, Fiat, Volvo + Cobo: 22714132000, 22714159000. More
Version: To fit: Case IH, Fiat, Volvo + Cobo: 22714132000, 22714159000...
€13,89 €11,48
Cobo Lamp glass right
Cobo
Installation location: Right. More
Installation location: Right.
€19,43 €16,05
Cobo Lamp glass left
Cobo
Installation location: Left. Menke no.: 55039. More
Installation location: Left. Menke no.: 55039.
€29,03 €23,99
Gaiter Ø upper 14 mm, lower 43 mm Fiat 670-980
To fit as: Fiat 570, 670, 580, 680, 780, 880, 880-5, 980, 45-66, 45-66S, 50-66, 50-66S, 60-66, 65-66, 80-66 More
To fit as: Fiat 570, 670, 580, 680, 780, 880, 880-5, 980, 45-66, 45-66...
€3,11 €2,57
Tube exhaust curved vertical enamelled 700 mm, Ø 49 mm Fiat
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-46, 60-46, 65-46, 55-56, 60-56, 65-56, 70-56, 55-60, 45-66, 50-66, 55-66, 60-66, ... More
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-4...
€49,96 €41,29 €45,96 €37,99
You save 8%
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€24,35 €20,12
Thrust washer Ø 171,1 x 94,3 mm, thickness 2,65 mm
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm. More
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm.
€23,60 €19,50
Cooling fan Ford, Case IH, Fiat, New Holland
€94,51 €78,11 €86,95 €71,86
You save 8%
Connecting rod bearing standard, Ø 63,73 mm
Dimensions: Ø 63.73 mm. More
Dimensions: Ø 63.73 mm.
€12,21 €10,09
Tank cap tank collar Ø 64 mm
Filler neck Ø: 64 mm. More
Filler neck Ø: 64 mm.
€21,23 €17,54
Bosch/Rexroth Hydraulic pump 14 cm³/rpm., taper 1:8, Ø 17,46, 7/16-20 UNF, left Fiat
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: Anticlockwise. Output volume: 14 cc/rev. Line connection suction side: Ø 40mm, ... More
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: ...
€511,82 €422,99 €470,87 €389,15
You save 8%
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Dimensions: 62.8 x 68.2 x 40 mm. More
Dimensions: 62.8 x 68.2 x 40 mm.
€23,03 €19,03
Spacer spring
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66, 50-66, 50-66S, 55-66, 55-66F, 55-66S, 56-66S, 60-66, 60-66S, 60-66F, 65-66, 65... More
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66...
€24,80 €20,50
Cobo Tank sender length 313 mm
Cobo
Version: Length: 313 mm. More
Version: Length: 313 mm.
€81,84 €67,64 €75,29 €62,23
You save 8%
Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade terminal 6.3 mm, Colour: white. To fit: BMW, Mercedes-Benz. More
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade t...
€26,75 €22,11
Angle drive tractormeter side 2 x M16 x 1
Version: Thread: 2 x M16 x 1. More
Version: Thread: 2 x M16 x 1.
€64,09 €52,97 €58,96 €48,73
You save 8%
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching function: on/off switch with silver contacts/with splash protection cap/spr... More
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switc...
€6,45 €5,33
Tank cap tank collar Ø 64 mm Fiat 415-1000
To fit as: Fiat 315, 415, 850, 1000, 446, 466, 511, 512, 566, 612, 615, 666, 715, 766, 55-46, 60-46, 65-46, 55-56, 60-56, 65-56, 70-56, 55-66, 60-66, ... More
To fit as: Fiat 315, 415, 850, 1000, 446, 466, 511, 512, 566, 612, 615...
€21,23 €17,54
Brake hose Fiat, New Holland, Case IH, Ford
€54,29 €44,87 €49,95 €41,28
You save 8%
Showing 193 - 240 of 251

Fiat 70-66 parts for the clutch, linkage and steering

A Fiat 70-66 that has done its hours tends to tell you where it hurts: a clutch that slips under load, a lift shaft weeping oil, steering with too much play. This page brings together more than 250 replacement parts that fit this tractor, made by GRANIT and by suppliers such as LUK, Eaton, Cobo and Bosch/Rexroth.

What you can fix with them

In the driveline there are double clutches, complete clutch kits and thrust bearings for the driving clutch, plus gear wheels. For the hydraulics you get hydraulic pumps, left and right lift rods and the sealing ring for the lifting shaft. The front end is covered by ball joints and steering cylinders. On the engine and electrical side you will find alternators, gear reduction starters and gaskets such as the oil sump gasket. Smaller items include O-rings for the brake cylinder, further sealing rings and replacement lamp glass for the lights.

Splitting the tractor once, not twice

If the 70-66 has to come apart for a new double clutch or clutch plate, fit a new thrust bearing at the same time. It costs little compared with splitting the tractor a second time, and a bearing that squeals or seizes will chew up the fingers of a new pressure plate surprisingly fast. While everything is open, look at the crankshaft seal and the flywheel face too. Oil contamination or deep scoring there will glaze a fresh plate in no time. With a hydraulic pump, check the direction of rotation first. Clockwise and anticlockwise versions look almost identical from the outside.

Tracking down play in steering and linkage

Jack up the front axle, hold the wheel at top and bottom and rock it. A knock at the ball joint means it is due for replacement, and leaving it only wears the steering cylinder and front tyres faster. A cylinder that weeps at the rod makes the steering vague, so you end up correcting all the time. Lift rods are worth a look too. A bent rod or worn eyes leave the implement hanging crooked, which is easiest to spot from behind with the linkage raised.

Matching the part to your tractor

The type plate gives you the model and serial number. The number cast or stamped into the old component is even more useful, usually on the alternator housing or the rim of a clutch cover. Enter that reference number in the shop and the matching replacement comes straight up. For lift rods and ball joints, measure the old item before ordering so length and taper agree.

Fiat sold the 70-66 alongside several close relatives in its 66 line. Each of those siblings has a page of its own, since parts can differ from model to model:

For every other Fiat tractor, start from Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart