Menu
EUR

John Deere 2040S tractor parts & technical data

The John Deere 2040S from the 40 series gets its own overview here, with more than 350 parts such as lighting, electrics and engine components.

370 parts found for John Deere 2040S
Show:
GRANIT Valve parts set hydraulic pump John Deere 840-3650
GRANIT
Valve parts set hydraulic pump John Deere 840-3650
Menke no.: 221647. More
Menke no.: 221647.
Add to wishlist
€17,00 €14,05
Gas strut roof window or rear window 300 N, 240 mm, stroke 91 mm John Deere
Gas strut roof window or rear window 300 N, 240 mm, stroke 91 mm John Deere
Newtons: 300. A: 240 mm. B: 130 mm. C: 6 mm. D: 6 mm. Stroke: 91 mm. d1: 6 mm. d2: 15 mm. To fit: Roof hatch or rear window. Form: 8. More
Newtons: 300. A: 240 mm. B: 130 mm. C: 6 mm. D: 6 mm. Stroke: 91 mm. d...
Add to wishlist
€47,81 €39,51 €45,40 €37,52
You save 5%
Bush set lift arm shaft Ø 7/8 inch, 42 x 20 x 28,2 mm John Deere
Bush set lift arm shaft Ø 7/8 inch, 42 x 20 x 28,2 mm John Deere
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm. More
Dimensions: Ø = 7/8", 42 x 20 x 28.2 mm.
Add to wishlist
€41,93 €34,65 €39,80 €32,89
You save 5%
Shim 29 x 42 x 1,2 mm John Deere 1350-3650
Shim 29 x 42 x 1,2 mm John Deere 1350-3650
Dimensions: 29 x 42 x 1.2 mm. More
Dimensions: 29 x 42 x 1.2 mm.
Add to wishlist
€2,50 €2,07
Pin 19 x 92 mm John Deere
Pin 19 x 92 mm John Deere
Dimensions: 19 x 92 mm. More
Dimensions: 19 x 92 mm.
Add to wishlist
€29,65 €24,50
GRANIT Bush for lower link strut 57 x 65,5 x 57 mm John Deere 820-2850
GRANIT
Bush for lower link strut 57 x 65,5 x 57 mm John Deere 820-2850
Dimensions: 57 x 65.5 x 57 mm. More
Dimensions: 57 x 65.5 x 57 mm.
Add to wishlist
€22,25 €18,39
Gasket set lifting block John Deere series 40, series 50
Gasket set lifting block John Deere series 40, series 50
Add to wishlist
€58,20 €48,10 €55,25 €45,66
You save 5%
Seal lift arm 58 x 6,5 mm John Deere 820-2850
Seal lift arm 58 x 6,5 mm John Deere 820-2850
Dimensions: 58 x 6.5 mm. More
Dimensions: 58 x 6.5 mm.
Add to wishlist
€9,20 €7,60
Threaded spindle 1 1/8" UNC left-hand thread, cat. 1, B 190 mm, G 246 mm
Threaded spindle 1 1/8" UNC left-hand thread, cat. 1, B 190 mm, G 246 mm
I: 1 1/8" UNC mm. Version: Left-hand thread. A: 19 mm. B: 190 mm. C: 44 mm. G: 246 mm. F: 56 mm. Category: 1 / 19. Menke no.: 54296. More
I: 1 1/8" UNC mm. Version: Left-hand thread. A: 19 mm. B: 190 mm. C: 4...
Add to wishlist
€39,41 €32,57 €35,65 €29,46
You save 10%
GRANIT Spring hood John Deere 820-3640
GRANIT
Spring hood John Deere 820-3640
Add to wishlist
€16,30 €13,47
GRANIT Headlight insert left / right 12V45/40WAS R2
GRANIT
Headlight insert left / right 12V45/40WAS R2
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2.
Add to wishlist
€58,25 €48,14 €52,70 €43,55
You save 10%
GRANIT Housing right metal, also als plastic housing available
GRANIT
Housing right metal, also als plastic housing available
Add to wishlist
€56,45 €46,65 €53,60 €44,30
You save 5%
Holder
Holder
Add to wishlist
€67,08 €55,44 €60,65 €50,12
You save 10%
HELLA Relays changeover contact 12 V, 30 - 40 A, 5-pin, 6,3 mm
HELLA
Relays changeover contact 12 V, 30 - 40 A, 5-pin, 6,3 mm
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
Add to wishlist
€13,45 €11,12
GRANIT Contact switch hand brake lever
GRANIT
Contact switch hand brake lever
Add to wishlist
€194,25 €160,54
Water pump without belt pulley and gasket John Deere Engine 940-5500
Water pump without belt pulley and gasket John Deere Engine 940-5500
To fit as: John Deere 840, 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2140, 1350, 1550, 1750, 1850, 2250, 2450, 2650, 2850, 5300, 5400, 5500 More
To fit as: John Deere 840, 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2...
Add to wishlist
€144,86 €119,72 €131,00 €108,26
You save 10%
Clutch plate 320, 22,3 x 25,8 mm, 15 splines, sintered
Clutch plate 320, 22,3 x 25,8 mm, 15 splines, sintered
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8, 15 grooves More
Material specifications: Sintered clutch lining | Additional informati...
Add to wishlist
€357,90 €295,79 €323,80 €267,60
You save 10%
MAHLE Alternator 14 V / 95 A, flange 56 mm, pulley-Ø 87 mm
MAHLE
Alternator 14 V / 95 A, flange 56 mm, pulley-Ø 87 mm
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): 0 | Charging current (A): 95 | Mounting hole Ø / R (mm): 8.2 / 86.0 | Additiona... More
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): ...
Add to wishlist
€456,28 €377,09 €271,55 €224,42
You save 40%
GRANIT Internal plate PTO shaft 5,9 mm, inner 28,5 mm, outer 110 mm, 19 teeth
GRANIT
Internal plate PTO shaft 5,9 mm, inner 28,5 mm, outer 110 mm, 19 teeth
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth More
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth
Add to wishlist
€82,39 €68,09 €78,25 €64,67
You save 5%
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
External plate 1,5 mm, inner 99 mm, outer 152 mm, 6 teeth John Deere
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth More
Version: thickness = 1,5 mm inner = 99 mm outer = 152 mm 6 teeth
Add to wishlist
€38,82 €32,08 €36,85 €30,45
You save 5%
GRANIT Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
GRANIT
Internal plate PTO clutch 2,5 mm, inner 92,8 mm, outer 133,2 mm
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines More
Version: Thickness: 2.5 mm Inner: 92.8 mm Outer: 133.2 mm 45 splines
Add to wishlist
€32,90 €27,19
LUK Thrust bearing with housing 49,5 x 93,5 mm John Deere 820 - 3350
LUK
Thrust bearing with housing 49,5 x 93,5 mm John Deere 820 - 3350
Dimensions (mm): 49.5 x 93.5 More
Dimensions (mm): 49.5 x 93.5
Add to wishlist
€155,50 €128,51 €147,70 €122,07
You save 5%
LUK Clutch plate 321TDCA 22,3 x 25,8 mm, 15 splines John Deere
LUK
Clutch plate 321TDCA 22,3 x 25,8 mm, 15 splines John Deere
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22.3 x 25.8 15 grooves | Material specifications: Sin...
Add to wishlist
€517,88 €428,00 €491,95 €406,57
You save 5%
GRANIT As hydraulic pump John Deere 840 - 3650
GRANIT
As hydraulic pump John Deere 840 - 3650
Add to wishlist
€120,64 €99,70 €114,60 €94,71
You save 5%
Showing 265 - 288 of 370
Brands
  • View more
Price
Min Max
Close
© Copyright 2026 Techniek Totaal
Choose your language
Choose your currency
€

My account

Forgot your password?
or

Recently added

Total incl. tax
€0,00
View cart (0) Proceed to checkout
0
Compare
Start comparison

This product has been added to your cart
Proceed to checkout Continue shopping