Menu
EUR

John Deere 3030 tractor parts & technical data

Electrics and lighting are two of the product groups you will find for the John Deere 3030 from the 30 series, in a list of more than 120 parts.

128 parts found for John Deere 3030
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
Control unit complete 1x da John Deere series 20, 30, 40, 50
€899,70 €743,55 €827,72 €684,07
You save 8%
BOSCH Start switch pull switch with gear change knob, Ø 10,5 mm
BOSCH
Version: Galvanised steel housing, including black control button, Power rating:, 50 A / 12 V, (terminals 17, 19), 27 A / 24 V (terminals 17, 19), 12 ... More
Version: Galvanised steel housing, including black control button, Pow...
€69,57 €57,50 €58,97 €48,74
You save 15%
MAHLE Alternator 14 V / 70 A, flange 56 mm, form B John Deere
MAHLE
Pulley Ø (mm): 87.0 | Belt width (mm) / type: 15,2 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Form: B | Nominal voltage (V): 14 | Flange size (mm... More
Pulley Ø (mm): 87.0 | Belt width (mm) / type: 15,2 | Mounting L / d /...
€249,29 €206,02 €149,31 €123,40
You save 40%
GRAMMER Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 400 mm. Fore/aft isolator: Optional. Sea... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.054,87 €871,79 €970,48 €802,05
You save 8%
Ball for gear shift linkage Ø 12,7 mm, 1/2 inch, DIN 5401
Ø Dw: 12,7 mm. Ø Dw: 1/2 inches. DIN: DIN 5401. More
Ø Dw: 12,7 mm. Ø Dw: 1/2 inches. DIN: DIN 5401.
€4,26 €3,52
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
MAHLE
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | Additional information: Dust-tight, with fan, with W connection | Nomi... More
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm...
€522,64 €431,93 €313,03 €258,70
You save 40%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€354,91 €293,31 €273,45 €225,99
You save 23%
Plunger pump 23 cm³/rpm. John Deere 940-3650
for tractors with hydraulic steering More
for tractors with hydraulic steering
€922,04 €762,02 €848,28 €701,06
You save 8%
HELLA Indicator/position light 12 V, R21W/C5W, yellow/white - 2 pieces
HELLA
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horizontal, yellow indicator light, white position light, with 2 holes for M4 fixing ... More
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horiz...
€47,11 €38,94
LUK Thrust bearing 55 x 90,5 x 22 mm
LUK
Dimensions (mm): 55 x 90.5 x 22 More
Dimensions (mm): 55 x 90.5 x 22
€192,19 €158,83 €176,81 €146,13
You save 8%
Control unit complete 1x sa John Deere series 20, 30, 40, 50
€568,99 €470,24 €523,47 €432,62
You save 8%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.022,73 €845,23 €940,91 €777,61
You save 8%
Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€122,13 €100,93 €112,36 €92,86
You save 8%
Alternator 14 V, 35 A, flange 56 mm, pulley Ø 68 mm, form B
Pulley spacing (mm): 21,0 | Mounting L / d / R (mm): 56,0 / 8,3 / - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm)... More
Pulley spacing (mm): 21,0 | Mounting L / d / R (mm): 56,0 / 8,3 / - | ...
€142,88 €118,08 €131,45 €108,64
You save 8%
Alternator 14 V / 33 A, flange 27 mm John Deere, Lindner, Massey Ferguson
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 | Nominal voltage (V): 14 | Pulley Ø (mm): 80,0 | Nominal values (V / A): 14 / ... More
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 ...
€137,22 €113,41 €126,24 €104,33
You save 8%
FEBI Alternator 14 V / 33 A, form B, flange 27,0 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Lindner, Massey Ferguson More
To fit as: Lindner, Massey Ferguson
€25,53 €21,10 €13,18 €10,89
You save 48%
Fender quarter circle 320 x 1070 mm black, without bracket
Width B: 320 mm. Length L: 1070 mm. Colour: Black. Description: • Manufactured using a rotation process • Material: (PE) polyethylene • Good fle... More
Width B: 320 mm. Length L: 1070 mm. Colour: Black. Description: • Ma...
€59,20 €48,93 €54,46 €45,01
You save 8%
Start switch 12 V pull switch, built-in Ø 10,5 mm, 0-1-2
Menke no.: 248055 | Switching stages: 0-1-2 | Version: Pull switch Protected against dripping water when installed vertically Mounting opening Ø 10.5... More
Menke no.: 248055 | Switching stages: 0-1-2 | Version: Pull switch Pro...
€60,35 €49,88
Alternator 12 V / 70 A, flange 56 mm, pulley Ø 87 mm, John Deere
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°): 0 | Nominal voltage (V): 12 | Belt tension hole Ø / R (mm): M8 / 84,5 | Mounti... More
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°):...
€192,51 €159,10 €177,11 €146,37
You save 8%
As hydraulic pump John Deere 840 - 3650
€125,88 €104,03 €115,81 €95,71
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€395,10 €326,53 €236,65 €195,58
You save 40%
Hydraulic pump 40 cm³/rpm. John Deere 1550-4030
Output volume: 40 cc/rev. More
Output volume: 40 cc/rev.
€2.136,82 €1.765,97 €1.965,87 €1.624,69
You save 8%
Replacement key lock number 14610 John Deere, Case IH
Locking number: 14610. Menke no.: 221631. More
Locking number: 14610. Menke no.: 221631.
€21,20 €17,52
Start switch 12 V, Ø 13,5 mm, without push button
Version: 12 V with blade terminal, 0: off, 1: preheat, 2: start, Mounting opening Ø 13.5 mm / 3 mm, control button 50712034. More
Version: 12 V with blade terminal, 0: off, 1: preheat, 2: start, Mount...
€58,78 €48,58 €54,08 €44,69
You save 8%
Indicator switch left and right, 3 blade connections
Version: Functions: centre position off, indicator left and right, 3 blade terminals. More
Version: Functions: centre position off, indicator left and right, 3 b...
€73,36 €60,63 €67,49 €55,78
You save 8%
Parts set hydraulic pump John Deere 830 - 3650
€106,31 €87,86 €97,81 €80,83
You save 8%
As hydraulic pump John Deere 1550 - 4455
€786,62 €650,10 €723,69 €598,09
You save 8%
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€252,98 €209,07 €232,74 €192,35
You save 8%
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
You save 8%
HELLA Starter motor 12 V, 2,9 kW, 10 teeth, Ø 82 mm, clockwise
€560,36 €463,11 €431,75 €356,82
You save 23%
Exhaust manifold John Deere 3030-3640, combine 1155-1158
€459,09 €379,41 €422,36 €349,06
You save 8%
AKS-Dasis Aircon compressor 12 V, pulley-Ø 139 mm, 1 groove, 295 ccm
€613,43 €506,97 €564,36 €466,41
You save 8%
Release bearing complete with sleeve Ø 49 mm John Deere 820 - 1850
€109,34 €90,36 €100,59 €83,13
You save 8%
Alternator 14 V / 65 A, flange 52,8 mm, pulley Ø 63 mm
Belt width (mm) / type: PV x 8 | Form: B | Mounting L / d / R (mm): 52,8 / 8,5 / 88,25 | Nominal values (V / A): 14 / 65 | Charging current (A): 65 | ... More
Belt width (mm) / type: PV x 8 | Form: B | Mounting L / d / R (mm): 52...
€171,06 €141,37 €157,38 €130,06
You save 8%
HELLA Alternator 14 V, 33 A, pulley Ø 92 mm, 1 groove
HELLA
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: With pulley | Pulle... More
Nominal values (V / A): 14 / 33 | No. of grooves: 1 | Charging current...
€359,31 €296,95 €276,84 €228,79
You save 23%
FEBI Thermostat Ø 54 mm, 82 °C John Deere, Sabre
FEBI
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (from 235170), 4430, 4630, 3040, 3140, 3640, 4040S, 4240, 4240S, 4440, 4640, 4840,... More
To fit as: John Deere, Sabre. Tractor types: 4520, 4620, 3030, 3130 (f...
€24,08 €19,90 €11,17 €9,23
You save 54%
MAHLE Gear reduction starter 12V 3,2 kW, 10 teeth clockwise
€501,81 €414,72 €300,55 €248,39
You save 40%
MAHLE Starter motor 12 V, 2,7 kW, 10 teeth, clockwise, mounting Ø 82,5 mm
€473,84 €391,60 €283,81 €234,55
You save 40%
Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 259 mm
€315,70 €260,91 €290,44 €240,04
You save 8%
Radiator John Deere 1030, 3030, 3120, 3130, 3135
To fit as: John Deere Series 20: 3120; Series 30: 1030, 3030, 3130; Series 35: 3135 More
To fit as: John Deere Series 20: 3120; Series 30: 1030, 3030, 3130; Se...
€796,81 €658,52 €733,07 €605,84
You save 8%
Gas strut roof window or rear window 300 N, 240 mm, stroke 91 mm John Deere
Newtons: 300. A: 240 mm. B: 130 mm. C: 6 mm. D: 6 mm. Stroke: 91 mm. d1: 6 mm. d2: 15 mm. To fit: Roof hatch or rear window. Form: 8. More
Newtons: 300. A: 240 mm. B: 130 mm. C: 6 mm. D: 6 mm. Stroke: 91 mm. d...
€49,89 €41,23 €45,90 €37,93
You save 8%
Start safety switch 9/16 inch UNF, standard open
Version: Make contact (contact function), Thread: 9/16" UNF, With screw connection. More
Version: Make contact (contact function), Thread: 9/16" UNF, With scre...
€40,67 €33,61 €37,42 €30,92
You save 8%
LUK Clutch plate 320TDCA 1 1/4 inch, 10 splines John Deere 1020 - 3340
LUK
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sin...
€397,22 €328,28 €365,44 €302,02
You save 8%
Valve hydraulic pump John Deere 1550 - 4960
€99,75 €82,44 €91,77 €75,84
You save 8%
Repair kit hydraulic pump John Deere 1550 - 4840
€154,42 €127,62 €142,07 €117,41
You save 8%
MAHLE Alternator 14 V / 55 A, flange 56 mm, pulley-Ø 87 mm, form B
MAHLE
Flange size (mm): 56,0 | Additional information: Dust-tight | Installation angle (°): 0 | Belt width (mm) / type: 15,2 | Nominal values (V / A): 14 /... More
Flange size (mm): 56,0 | Additional information: Dust-tight | Installa...
€234,03 €193,41 €140,16 €115,84
You save 40%
Showing 1 - 48 of 128

John Deere 3030 parts

A John Deere 3030 that will not fire up after a cold night in an open shed is a familiar story. That is why the parts for this tractor include standard starter motors and a gear reduction starter, a glow start switch and injection nozzles. Charging is handled by an alternator, with more than one version available. In total more than 120 parts fit the 3030, from GRANIT, MAHLE, GRAMMER, HELLA and VICTOR REINZ.

Starter troubleshooting before you buy

If the starter turns slowly, measure battery voltage while cranking and check the earth strap and the connections on the starter first. A corroded earth gives exactly the same symptoms as a worn starter. If the starter itself is at fault, a gear reduction unit makes a strong replacement because it turns the engine over on less current. Always disconnect the battery negative before working on it.

Engine, cooling and the rest

For the engine there are cylinder head gaskets, air receiver gaskets and a fuel feed pump. Cooling is controlled by a thermostat. When you fit a new one, renew the housing gasket and bleed the cooling system properly afterwards. In the seat area you will find seats, including a mechanical Compacto, and tractor seats from GRAMMER. HELLA headlights, tank caps and a hand brake band complete the picture. Once a new brake band is in, adjust it until the hand brake holds the tractor on a slope.

Injection nozzles and the head gasket

Black smoke, poor starting or a hard knock from the engine can all point to a nozzle that drips or sprays badly. Have the nozzles tested and set by a diesel specialist, and replace them as a set so every cylinder runs evenly. New copper washers go under the nozzles when they are refitted. If coolant keeps disappearing without a visible leak, or you see white smoke and bubbles in the radiator, suspect the head gasket and check the head for flatness before it goes back on.

Making sure it fits your 3030

The type plate confirms you have a 3030. With starters and alternators, compare the number of teeth, the direction of rotation and the flange against the old unit. For gaskets, go by engine type. A reference number on the old part makes the choice even more certain.

If there is also a John Deere 4230 in your yard, its parts are on the John Deere 4230 page. For any other model from the brand, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart