Menu
EUR

John Deere 2040S tractor parts & technical data

The John Deere 2040S from the 40 series gets its own overview here, with more than 350 parts such as lighting, electrics and engine components.

371 parts found for John Deere 2040S
Show:
Interior cladding complete for SG2 high cab
To fit: für SG2 Hochdachkabine. More
To fit: für SG2 Hochdachkabine.
€758,68 €627,01 €545,00 €450,41
You save 28%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor More
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Ze...
€183,88 €151,97 €169,17 €139,81
You save 8%
LED main headlight round 133 x 166 x 84 mm, H4, 12/24 V
Protection class: IP69K | Connection: H4 | EMC: CISPR 25 class 3 | Test mark: ECE R148, ECE R149 | Light function: Dipped beam, full beam, side light,... More
Protection class: IP69K | Connection: H4 | EMC: CISPR 25 class 3 | Tes...
€112,54 €93,01 €103,54 €85,57
You save 8%
Cladding set for SG2 high cab ceiling, for radio console
To fit: für Dachhimmel SG2 Hochkabine, für Radiokonsole. More
To fit: für Dachhimmel SG2 Hochkabine, für Radiokonsole.
€633,39 €523,46 €400,61 €331,08
You save 37%
Indicator-width bulb LED 12 / 24 V, 84 x 84 x 51 mm, cable 4000 mm
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light function: Indicator, position light | Nominal voltage (V): 12 / 24 | Additional ... More
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light ...
€54,98 €45,44 €50,58 €41,80
You save 8%
Replacement key lock number 14610 - 2 pieces
Locking number: 14610. Version: Locking no. 14610. More
Locking number: 14610. Version: Locking no. 14610.
€15,70 €12,98
MAHLE Alternator 14 V / 70 A, flange 56 mm, form B John Deere
MAHLE
Pulley Ø (mm): 87.0 | Belt width (mm) / type: 15,2 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Form: B | Nominal voltage (V): 14 | Flange size (mm... More
Pulley Ø (mm): 87.0 | Belt width (mm) / type: 15,2 | Mounting L / d /...
€249,29 €206,02 €149,31 €123,40
You save 40%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
MAHLE
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | Additional information: Dust-tight, with fan, with W connection | Nomi... More
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm...
€522,64 €431,93 €313,03 €258,70
You save 40%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€354,91 €293,31 €273,45 €225,99
You save 23%
Handle John Deere
Brand: John Deere. More
Brand: John Deere.
€8,38 €6,92
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€80,43 €66,47 €77,45 €64,01
You save 4%
Sealing ring for injection nozzle Ø 13,6 x 9,3 mm, height 5,1 mm
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221605. More
Dimensions: Height 5.1, Outer Ø 13.6, Inner Ø 9.3 mm. Menke no.: 221...
€2,51 €2,08
Plunger pump 23 cm³/rpm. John Deere 940-3650
for tractors with hydraulic steering More
for tractors with hydraulic steering
€922,04 €762,02 €848,28 €701,06
You save 8%
HELLA Indicator/position light 12 V, R21W/C5W, yellow/white - 2 pieces
HELLA
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horizontal, yellow indicator light, white position light, with 2 holes for M4 fixing ... More
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horiz...
€47,11 €38,94
Danfoss Orbitrol OSPB 160 CN John Deere 2040S - 3340
Danfoss
Type: OSPB 160 CN / 150-0168 More
Type: OSPB 160 CN / 150-0168
€1.170,80 €967,60 €1.077,14 €890,20
You save 8%
Valve head steering valve EW John Deere 830 - 3650
€398,35 €329,21 €366,48 €302,88
You save 8%
Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Installation angle (°): l 60 | Charging current (A): 35 | Fo... More
Additional information: with W connection | Mounting L / d / R (mm): 5...
€122,13 €100,93 €112,36 €92,86
You save 8%
DANA Spicer Synchroniser unit, complete drive shaft for gear shift John Deere
€1.024,93 €847,05 €942,94 €779,29
You save 8%
Alternator 14 V, 35 A, flange 56 mm, pulley Ø 68 mm, form B
Pulley spacing (mm): 21,0 | Mounting L / d / R (mm): 56,0 / 8,3 / - | Flange size (mm): 56,0 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm)... More
Pulley spacing (mm): 21,0 | Mounting L / d / R (mm): 56,0 / 8,3 / - | ...
€142,88 €118,08 €131,45 €108,64
You save 8%
Seat mechanical suspension, PVC yellow, width 485 mm John Deere
Vorwärts- und Rückwärtseinstellung 150 mm Federweg: 80–100 mm (Paarfeder und hydraulischer Stoßdämpfer) Gewichtsanpassung: 50 - 120 kg Winkelei... More
Vorwärts- und Rückwärtseinstellung 150 mm Federweg: 80–100 mm (Pa...
€148,21 €122,49 €136,35 €112,69
You save 8%
MAHLE Alternator 14 V / 95 A, flange 56 mm, pulley-Ø 87 mm
MAHLE
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): 0 | Charging current (A): 95 | Mounting hole Ø / R (mm): 8.2 / 86.0 | Additiona... More
Mounting L / d / R (mm): 56.0 / 8.2 / 86.0 | Installation angle (°): ...
€453,45 €374,75 €271,58 €224,45
You save 40%
Alternator 14 V / 33 A, flange 27 mm John Deere, Lindner, Massey Ferguson
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 | Nominal voltage (V): 14 | Pulley Ø (mm): 80,0 | Nominal values (V / A): 14 / ... More
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 ...
€137,22 €113,41 €126,24 €104,33
You save 8%
FEBI Alternator 14 V / 33 A, form B, flange 27,0 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Lindner, Massey Ferguson More
To fit as: Lindner, Massey Ferguson
€25,53 €21,10 €13,18 €10,89
You save 48%
PTO shaft end piece 260 mm, 1 3/8" 21 splines, 1000 rpm. John Deere
Version: Length 260 mm, 1 3/8", 21 splines, 1000 rpm. More
Version: Length 260 mm, 1 3/8", 21 splines, 1000 rpm.
€266,62 €220,35 €245,29 €202,72
You save 8%
Gasket set, complete engine 4219D, 4239D/T, 4276 John Deere
€79,44 €65,65 €73,08 €60,40
You save 8%
Torsie as 497 mm, Ø 25,4 mm John Deere series 20-50
Dimensions: Length = 497, Ø = 1", 25.4 mm. More
Dimensions: Length = 497, Ø = 1", 25.4 mm.
€132,83 €109,78 €122,20 €100,99
You save 8%
HELLA Rear light 158 x 64 x 51 mm, 12 V, left, P21W, R10W
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€37,09 €30,65
Contact switch hand brake lever
Single clutch GN 300 41,5 x 44,8 mm, 27 splines John Deere
Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21,6 | Additional information: Made in Germany More
Dimensions (mm): 41.5 x 44.8, 27 grooves | Flywheel dimension (mm): 21...
€692,79 €572,55
Pilot bearing 15 x 35 x 11 mm John Deere 820 - 3650
Dimensions (mm): 15 x 35 x 11 More
Dimensions (mm): 15 x 35 x 11
€5,83 €4,81
Alternator 12 V / 70 A, flange 56 mm, pulley Ø 87 mm, John Deere
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°): 0 | Nominal voltage (V): 12 | Belt tension hole Ø / R (mm): M8 / 84,5 | Mounti... More
Pulley Ø (mm): 87 | Flange size (mm): 56,0 | Installation angle (°):...
€192,51 €159,10 €177,11 €146,37
You save 8%
As hydraulic pump John Deere 840 - 3650
€125,88 €104,03 €115,81 €95,71
You save 8%
HELLA Alternator 14 V / 85 A, without belt pulley, Fendt, John Deere
HELLA
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 85 | Charging current (A): 85 | Nominal v...
€429,84 €355,24 €331,19 €273,71
You save 23%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 82,5 mm, 246 mm, clockwise
€395,10 €326,53 €236,65 €195,58
You save 40%
Parts set hydraulic pump John Deere 830-3650
€291,67 €241,05 €268,34 €221,77
You save 8%
Replacement key lock number 14610 John Deere, Case IH
Locking number: 14610. Menke no.: 221631. More
Locking number: 14610. Menke no.: 221631.
€21,20 €17,52
Start switch 12 V, Ø 13,5 mm, without push button
Version: 12 V with blade terminal, 0: off, 1: preheat, 2: start, Mounting opening Ø 13.5 mm / 3 mm, control button 50712034. More
Version: 12 V with blade terminal, 0: off, 1: preheat, 2: start, Mount...
€58,78 €48,58 €54,08 €44,69
You save 8%
Ignition switch 12 V, built-in-Ø 26 mm, with 2 keys
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 mm + 6.3 mm. Mounting Ø: 26 mm. Fixing: Fastening nut brass. Nominal voltage: 1... More
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 ...
€47,24 €39,04 €43,46 €35,92
You save 8%
Clutch plate 320, 22,3 x 25,8 mm, 15 splines, sintered
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 22.3 x 25.8, 15 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€373,11 €308,36 €343,26 €283,69
You save 8%
KS Piston ring set 3 rings 3,13 / 2,39 / 3,47 mm, Ø 106,5 mm John Deere
Internal plate PTO shaft 5,9 mm, inner 28,5 mm, outer 110 mm, 19 teeth
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth More
Version: Thickness: 5.9 mm Inner: 28.5 mm Outer: 110 mm 19 teeth
€85,97 €71,05 €79,09 €65,37
You save 8%
External plate 2,3 mm, inner 99 mm, outer 143 mm, 10 teeth John Deere
Version: Thickness: 2.3 mm Inner: 99 mm Outer: 143 mm, 10 splines More
Version: Thickness: 2.3 mm Inner: 99 mm Outer: 143 mm, 10 splines
€26,06 €21,54
LUK Clutch plate 1 1/4 inch, 10 splines, organic John Deere
LUK
Material specifications: Organic clutch lining | Dimensions (inches): 1 1/4"" 10 grooves More
Material specifications: Organic clutch lining | Dimensions (inches): ...
€592,68 €489,82 €545,27 €450,63
You save 8%
LUK Clutch plate 1 1/4 inch, 10 splines, sintered John Deere 2040S - 3640
LUK
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (inches): 1 1/4"" 10 grooves | Material specifications: Sin...
€442,15 €365,41 €406,78 €336,18
You save 8%
Prestolite Alternator 12 V, 70 A, pulley Ø 69 mm, belt 6pK
€252,98 €209,07 €232,74 €192,35
You save 8%
Starter motor 12 V, 2,7 kW, 10 teeth, Ø 82,5 mm, clockwise
€351,67 €290,64 €323,54 €267,39
You save 8%
Showing 1 - 48 of 371

John Deere 2040S parts for clutch, engine and steering

Keeping a John Deere 2040S at work means dealing with the jobs an older tractor brings: a clutch, an alternator, a weeping gasket. For this member of the John Deere 40 series, this page lists more than 350 parts from GRANIT, HELLA, LUK, MAHLE and VICTOR REINZ.

Clutch work

There are clutch plates, single clutch assemblies and internal plates, partly from LUK. Once the tractor is split, replace the clutch plate and pressure plate together. Splitting engine from gearbox is the costly part of the job, not the parts. Check the flywheel for heat spots and scoring and have it skimmed if needed, then use an alignment tool so the input shaft slides through the new plate without forcing.

Engine seals and electrics

For the engine there are gaskets, seals, O-rings and sealing rings, such as a seal for the feed pump, an O-ring for the oil pump and sealing rings for the injection nozzles. There is also a gasket for the lift housing. Always use new nozzle sealing rings, because a used one is already crushed and will not seal reliably a second time.

Alternators and starter motors come in several versions, so compare flange and pinion with the unit you removed. Relays and radiator hoses are available too.

Steering, driveshafts and linkage

Track rods cover the steering and universal joints the driveshafts. A universal joint that feels notchy in one position needs replacing, even if it does not rattle yet. Bushes for the lower link struts and tubes complete the picture.

After replacing a track rod, the toe-in will not be right on its own. Count the turns as you unscrew the old rod, screw the new one in the same amount, and have the toe-in checked afterwards. A radiator hose that feels soft or cracked with the engine cold should go, together with its clamps.

Bushes for the lower link struts wear oval over time. If the linkage knocks when you lift an implement, check the bushes before looking at anything more expensive.

Matching parts to the 2040S

The serial number is on the type plate. Many parts on this page also carry a John Deere reference number, which you will often find on the old part as well.

Other tractors from the 40 series with their own page are the John Deere 1640, John Deere 3640, John Deere 4040, John Deere 4240 and John Deere 4440. For the brand as a whole, see John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart