Menu
EUR

Fendt 939 Vario (Typ 954) tractor parts & technical data

More than 300 parts for the Fendt 939 Vario Typ 954, the version shown on your type plate. The range includes electrics, lighting and trailer couplings.

314 parts found for Fendt 939 Vario
Show:
Pilot bearing 20 x 42 x 12 mm
Pilot bearing 20 x 42 x 12 mm
Dimensions (mm): 20 x 42 x 12
€7,30 €6,03
 
BOSCH Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
BOSCH
Fuel pre-filter line filter D 37 mm, H 105 mm, connection 6 mm
C (mm): 35 | F: 6 | D (mm): 37 | H (mm): 105 | Height (mm): 105 | Version: Leitu...
€3,83 €3,17
 
Wabco Compressor 10 bar, 318 cm³, Ø 85 mm, stroke 56 mm, Fendt 924-939
Wabco
Compressor 10 bar, 318 cm³, Ø 85 mm, stroke 56 mm, Fendt 924-939
Operating pressure max.: 10 bar. Cylinder capacity: 318 cm³. Speed: 3000 1/min.....
€3.179,35 €2.627,56
 
GRANIT Temperature sensor diesel particulate filter Fendt, Deutz-Fahr, Lamborghini
5%
GRANIT
Temperature sensor diesel particulate filter Fendt, Deutz-Fahr, Lamborghini
Description: At diesel particulate filter.
€150,71 €124,55 €143,15 €118,31
 
GRANIT O-ring front cover 40 x 4 mm Fendt
GRANIT
O-ring front cover 40 x 4 mm Fendt
€7,40 €6,12
 
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
GRANIT
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Thread: M22 x 1.5.
€14,30 €11,82
 
O-clamp set 8001102, FS19950, WK1070X
5%
O-clamp set 8001102, FS19950, WK1070X
€32,28 €26,68 €30,65 €25,33
 
Handle Fendt, Case IH
5%
Handle Fendt, Case IH
€39,20 €32,40 €37,20 €30,74
 
Hinge pin rear screen hinge Fendt
Hinge pin rear screen hinge Fendt
€4,72 €3,90
 
Holder left width 75 mm, height 165 mm, material thickness 3 mm Fendt
Holder left width 75 mm, height 165 mm, material thickness 3 mm Fendt
Width: 75 mm. Material thickness: 3 mm. H: 165 mm.
€22,95 €18,97
 
Locking plate joint Fendt
Locking plate joint Fendt
€18,30 €15,12
 
Mirror heated, electric adjustment, 12 V, right / left Fendt
5%
Mirror heated, electric adjustment, 12 V, right / left Fendt
Version: Heated. Operating voltage: 12 V. Installation location: Right/left. Not...
€232,50 €192,15 €220,85 €182,52
 
Spring driepuntcentrering Fendt
Spring driepuntcentrering Fendt
€20,85 €17,23
 
Clamp
Clamp
Brand: Fendt.
€12,15 €10,04
 
GRANIT Guide short version Fendt Farmer 307 (Typ 117), KATANA 65
10%
GRANIT
Guide short version Fendt Farmer 307 (Typ 117), KATANA 65
€159,52 €131,83 €144,30 €119,26
 
Mirror 490 x 220 mm, wide-angle, left Fendt
10%
Mirror 490 x 220 mm, wide-angle, left Fendt
Dimensions: 490 x 220 mm. Height: 490 mm. Width: 220 mm. Installation location: ...
€370,42 €306,13 €335,10 €276,94
 
Sensor driving speed A, pinion speed G, conical rondsel
5%
Sensor driving speed A, pinion speed G, conical rondsel
Version: Function: Driving speed A, Transmission speed G, bevel pinion.
€117,61 €97,20 €111,70 €92,31
 
GRANIT Hall sensor driving speed, engine speed, rear PTO shaft and for
5%
GRANIT
Hall sensor driving speed, engine speed, rear PTO shaft and for
Version: Driving speed A, engine speed B, rear PTO speed C, front PTO speed E.
€101,13 €83,58 €96,00 €79,34
 
HELLA Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
HELLA
Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Material: Plastic. ...
€1,96 €1,62
 
Micro relay changeover contact 12 V, 10 - 20 A, 5-pin, without bracket
Micro relay changeover contact 12 V, 10 - 20 A, 5-pin, without bracket
Version: 12 V / 10 - 20 A, Without bracket, 5-pin, Connection: 3 x 4.8 mm, 2 x 6...
€9,35 €7,73
 
Showing 121 - 144 of 314

Fendt 939 Vario parts for Typ 954

This page lists more than 300 parts that fit the Fendt 939 Vario with Typ 954 on its type plate. Parts for the other versions of the 939 Vario are kept off this page, which saves you from ordering something meant for a tractor with a different Typ number.

Parts for the 939 Vario Typ 954 at a glance

  • Air suspended tractor seats, including GRAMMER models, for drivers who spend long days in the cab.
  • Alternators, pressure switches and temperature sensors, such as the one for the air conditioning.
  • Wabco connector heads for the trailer air brake lines.
  • ROCKINGER drawbars and springs for the three point linkage.
  • LED work lamps from HELLA and push button switches for the dashboard.
  • Seals, O-rings, discs and tank caps.

How to make sure a part fits

Start at the type plate. Typ 954 on that plate means this list is the one for your tractor. If it shows another number, go to the Fendt 939 Vario (Typ 946) or the Fendt 939 Vario (Typ 960). The general Fendt 939 Vario page brings all versions together if you are unsure which one you have. Once the old part is off the tractor, look for a reference number stamped into it or printed on a label. With seals and O-rings, which tend to look alike, that number is far more reliable than comparing shapes on the workbench.

A word on trailer brake couplings

Connector heads get coupled and uncoupled every time you change implements, and they pick up dust and grit along the way. A little dirt on the rubber seal is enough to cause a leak that you only notice when the compressor keeps running. Keep the red supply head and the yellow brake head clean and close the dust covers whenever nothing is hooked up. If a head still hisses with a clean seal, replace the whole head rather than just the rubber ring. And if the alternator seems to be undercharging, check the belt and the earth cable before you condemn it.

Other tractors in the Fendt 900 range

Running more than one Vario from this range? Each model has its own page with the parts that fit it: Fendt 930 Vario, Fendt 933 Vario, Fendt 936 Vario, Fendt 942 Vario, Fendt 927 Vario and Fendt 924 Vario. Order from the page of the tractor you are working on, since parts can differ even within one range. For every other model from the brand, see Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart