Menu
EUR

Tractor parts Fendt Favorit 509 (Typ 509)

Looking for parts for your Fendt Favorit 509 (Typ 509) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

690 parts found for Fendt Favorit 509 (Typ 509)
Show:
Knob for heater / operation
Version: For heater/operation. More
Version: For heater/operation.
€13,80 €11,41
Micro relay changeover contact 12 V, 10 - 20 A, 5-pin, without bracket
Version: 12 V / 10 - 20 A, Without bracket, 5-pin, Connection: 3 x 4.8 mm, 2 x 6.3 mm, With suppressor diode for suppressing inductive interference vo... More
Version: 12 V / 10 - 20 A, Without bracket, 5-pin, Connection: 3 x 4.8...
€9,35 €7,73
GRANIT Sealing ring side shaft Fendt Farmer 106, 108
GRANIT
To fit as: Fendt Farmer 106, 108 More
To fit as: Fendt Farmer 106, 108
€45,52 €37,62 €41,40 €34,21
You save 9%
Wabco Overflow valve 6 bar, M22 x 1,5 Fendt Farmer, Favorit
Wabco
Connection: M22 x 1.5 | Working pressure (bar): 13 | Overflow pressure (bar): 6 More
Connection: M22 x 1.5 | Working pressure (bar): 13 | Overflow pressure...
€139,65 €115,41
Repair set clutch cylinder Fendt Favorit 509 - 515
€74,86 €61,87 €68,15 €56,32
You save 9%
Denso Aircon compressor 12 V, Ø 130 mm, 1 groove Fendt Farmer
Denso
Dimensions W x H x D (mm): 204 x 128 | Fixing: DM | No. of grooves: 1 | Pulley Ø (mm): 130 | For compressor: 10PA15C | Nominal voltage (V): 12 | Refe... More
Dimensions W x H x D (mm): 204 x 128 | Fixing: DM | No. of grooves: 1 ...
€1.025,08 €847,17 €933,20 €771,24
You save 9%
Alternator 14 V, 150 A, flange 55,8 mm
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (mm): 55,8 | Nominal voltage (V): 14 | Form: B | Pulley Ø (mm): - | Nominal value... More
Charging current (A): 150 | Belt width (mm) / type: - | Flange size (m...
€215,54 €178,13 €196,20 €162,15
You save 9%
HELLA Alternator 14 V / 150 A, without belt pulley, 7,33 kg
HELLA
Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 150 | Charging current (A): 150 More
Nominal voltage (V): 14 | Additional information: Without pulley | Nom...
€749,79 €619,66 €577,70 €477,44
You save 23%
GRANIT Constant velocity joint drive shaft Ø 108 mm, 28 teeth, profile 31,3 x 29,2 Fendt
GRANIT Bush lift arm shaft 65 x 80 x 79,8 mm Fendt
GRANIT
Dimensions (mm): 65 x 80 x 79.8. More
Dimensions (mm): 65 x 80 x 79.8.
€54,34 €44,91 €49,45 €40,87
You save 9%
Seal kit engine MWM D 226, TD 226
€57,03 €47,13 €51,90 €42,89
You save 9%
Guide lower Fendt Farmer 307 (Typ 117), Xylon 524
€180,62 €149,27 €164,40 €135,87
You save 9%
GRANIT Bearing bracket gasdruckfeder mount roof hatch Fendt
€52,05 €43,02 €47,35 €39,13
You save 9%
GRANIT Spacer pipe three-point 15 x 10 x 13,6 mm Fendt Farmer, Favorit
GRANIT
A: 15 mm. B: 10 mm. C: 13,6 mm. More
A: 15 mm. B: 10 mm. C: 13,6 mm.
€2,15 €1,78
Gas strut door or rear window 150 N, 505 mm Fendt, John Deere
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door or rear screen. More
suitable for: Tür- oder Heckscheibe. Newtons: 150. A: 505 mm. B: 255 ...
€32,90 €27,19
Windshield frame shock absorber 250 N, 600 mm, ball socket 10 mm Fendt
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: windscreen. Menke no.: 54807. More
suitable for: Frontscheibe. Newtons: 250. A: 600 mm. B: 310 mm. C: 10 ...
€39,22 €32,41 €35,70 €29,50
You save 9%
Protective grille hood Fendt Farmer 304-312, Favorit 509-515
€261,57 €216,17 €238,10 €196,78
You save 9%
GRANIT Pin for front grille hood Fendt
GRANIT Strut right 24 inch tires Fendt
GRANIT
Version: 24" Bereifung. Installation location: rechts. More
Version: 24" Bereifung. Installation location: rechts.
€525,00 €433,88 €477,95 €395,00
You save 9%
Walterscheid Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
Walterscheid
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. Trailer load: 25000 kg. No. of holes: 4. Description: Towing coupling... More
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colo...
€276,01 €228,11 €218,20 €180,33
You save 21%
Sensor steering angle front axle, connection cable with plug connection
Version: Steering angle sensor, Connection cable with plug connection. More
Version: Steering angle sensor, Connection cable with plug connection.
€429,35 €354,83
Symbol front work light black / white
Version: Black/white, front work light. More
Version: Black/white, front work light.
€20,00 €16,53
Showing 121 - 144 of 690

Fendt Favorit 509 (Typ 509) specs

The Fendt Favorit 509 C is the entry-level model of the Favorit 500C series, which Fendt introduced in the autumn of 1993. The names Favorit 509 (Typ 509) and Favorit 509C (Typ 509) refer to the same model. The tractor was built from 1994 to 2000, with a total of 1,490 units produced during that period. Despite being the smallest model in the series, its technical specification closely matched that of the much heavier Fendt 800 series. The 509 C was designed as a versatile tractor suitable for ploughing, harvesting, loading and transport work.

Engine and power

Under the hood sits an MWM four-cylinder turbodiesel, type TD 226 B-4, with a displacement of 4,156 cc. Engine output is 95 hp (70.8 kW) at 2,100 rpm. Maximum torque is 381 Nm at 1,500 rpm. Fuel delivery is handled by a Bosch VE distributor pump with automatic advance and multi-hole injectors. Maximum injection pressure is 850 bar. Further features include overhead valves, pressure lubrication, piston crown cooling and a gear-driven camshaft. Cooling is handled by a thermostatically controlled dual-circuit system with a viscous fan coupling and exhaust turbocharger. The constant power range runs between 1,900 and 2,400 rpm, and an oil change is only required after 500 operating hours. The fuel tank holds 135 litres.

Transmission

The 509 C uses a ZF 7200 Turboshift gearbox, a fully synchronised unit with four-speed powershift and electro-hydraulic reverser operated by a single lever. The gearbox offers 44 forward and 44 reverse gears, consisting of 24 working gears and 20 creep gears. A notable feature is the Voith fluid coupling (type 390 TD-F), positioned ahead of the wet multi-disc clutch. This hydraulic coupling smooths out power delivery and protects the drivetrain from shock loads. Direction changes can be made without depressing the clutch, thanks to the synchronised reverser with preselect function. Standard top speed is 40 km/h, with an optional increase to 50 km/h.

Hydraulics and PTO

  • Hydraulic pump: closed system with a flow rate of 101.8 litres per minute
  • Rear three-point hitch lift capacity: 5,508 kg (category II/III)
  • Control: lower-link draft sensing
  • Rear PTO: independent, electro-hydraulic, 540/750/1000/1400 rpm
  • Front PTO: independent, optional, 1000 rpm
  • Front and rear differential lock: electro-hydraulic

Dimensions, weight and tyres

The operating weight of the tractor is 4,970 kg. Wheelbase is 233 cm. Standard tyre sizes are 420/70R24 front and 480/70R38 rear, though 18.4 R38 rear was also used. The electrical system runs on 12 volts with a 110 Ah battery and alternator charging.

Cab

The cab of the 509 C was at launch nearly identical to that of the Farmer 300 series, with a noise level of 72 dB(A). In 1995 the cab comfort was upgraded. Heating was standard, air conditioning was optional. The cab was fitted with a sprung suspension mounting.

Parts and brands for the Fendt Favorit 509 C

We supply parts for the Fendt Favorit 509 C, for both routine maintenance and full restoration. This covers engine parts, cooling components, exhaust systems, fuel filters, hydraulic components, brakes, electrics and cab parts. The parts we supply come from brands including Granit, Kramp, Agco Parts, Bosch, Hella, Grammer, Cobo, Mahle, Mann-Filter and Scharmüller.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart