Menu
EUR

Fendt Favorit 611 (Typ 382) parts

Looking for parts for your Fendt Favorit 611 (Typ 382) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

568 parts found for Fendt Favorit 611 (Typ 382)
Show:
Cover
€57,95 €47,89 €53,31 €44,06
You save 8%
HELLA Work lamp spotlight H3 12 / 24 V, 158 x 162 x 127 mm, bracket assembly
HELLA
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 158 x 162 x 127 mm. Light function: Far-reaching illumination. Connection: Open c... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€75,63 €62,50 €72,83 €60,19
You save 4%
BOSCH Relays make contact 12 V, 30 A, without bracket, 5-pin, sperdiode
BOSCH
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, With blocking diode. Colour: Black. Housing: Plastic housing. Nominal current: 30... More
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm, W...
€22,96 €18,98
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, with indicator light monitoring for commercial vehicles or tractors wi... More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with...
€50,77 €41,96 €46,71 €38,60
You save 8%
Oil pressure warning switch M10 x 1 conical short DIN 158, 0,5 - 0,8 bar
Version: Thread: M10 x 1 (tapered, short) DIN 158, Switching pressure: 0.5 - 0.8 bar, Blade terminal. More
Version: Thread: M10 x 1 (tapered, short) DIN 158, Switching pressure:...
€13,89 €11,48
Grip hand brake lever Fendt
To fit as: Fendt Farmer 303, 304, 307, 308, 309, 310, 311, 312, Favorit 509, 510, 511, 512, 514, 515 More
To fit as: Fendt Farmer 303, 304, 307, 308, 309, 310, 311, 312, Favori...
€13,03 €10,76
Seal feed pump
To fit as: Deutz DX 140, 145, 160 More
To fit as: Deutz DX 140, 145, 160
€2,89 €2,39
Gasket valve cover Fendt
To fit as: Fendt FL 120, FL 131, F 231 GT, Farmer 102, F 250 GT More
To fit as: Fendt FL 120, FL 131, F 231 GT, Farmer 102, F 250 GT
€5,33 €4,40
Universal joint 35 x 94,92 mm, maintenance-free
A: 35 mm. B: 94,92 mm. Size: 94,92 x 94,92 x 35. Universal joint size: . Lubrication system: Maintenance-free. More
A: 35 mm. B: 94,92 mm. Size: 94,92 x 94,92 x 35. Universal joint size:...
€174,08 €143,87 €160,15 €132,36
You save 8%
Wabco Compressor 10 bar, 159 cm³, Ø 75 mm, stroke 36 mm, V-pulley 28,5 mm
Wabco
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Thread:... More
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3...
€2.677,49 €2.212,80 €2.565,88 €2.120,56
You save 4%
Brake disc Ø 270 mm, thickness 24 mm, 8 hole Fendt Favorit 611-615
€276,30 €228,35 €254,20 €210,08
You save 8%
Dust cap wheel brake cylinder DOT4 Fendt
€3,89 €3,21
U-gaiter brake cylinder DOT4 Fendt Favorit 600-615
€11,30 €9,34
Brake hose DOT4 Fendt
Medium: DOT4. More
Medium: DOT4.
€137,00 €113,22 €126,04 €104,17
You save 8%
Ratchet pawl hand brake lever Fendt
€64,14 €53,01 €59,01 €48,77
You save 8%
Repair set foot brake Fendt
€38,81 €32,07 €35,71 €29,51
You save 8%
Seal 0,5 mm Fendt
Thickness: 0,5 mm. More
Thickness: 0,5 mm.
€6,59 €5,44
Differential seal inner Ø 65 x 85 x 13/9,5 mm Fendt
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 65 mm. Height 1: 13 mm. More
Material: NBR (nitrile butadiene rubber). Inner Ø d1: 65 mm. Height 1...
€42,11 €34,80 €38,74 €32,02
You save 8%
Rear axle shaft seal inner Ø 60,5 x 80 x 12 mm Fendt Favorit 600-615
Dimensions: 60,5 x 80 x 12 mm. Outer Ø: 80 mm. Inner Ø: 60.5 mm. Height 1: 12 mm. More
Dimensions: 60,5 x 80 x 12 mm. Outer Ø: 80 mm. Inner Ø: 60.5 mm. Hei...
€73,65 €60,87 €67,76 €56,00
You save 8%
Rear axle shaft seal outer Ø 102 x 152 x 18,5/25 mm Fendt
€207,36 €171,37 €190,77 €157,66
You save 8%
Optibelt V-belt AVX10, 1425 mm Fendt, Massey Ferguson
Optibelt
Description: optibelt MARATHON X. h: 8 mm. Outer length: 1425 mm. Inner length: 1374 mm. Profile: AVX10. Technical data: The optibelt MARATHON X V-bel... More
Description: optibelt MARATHON X. h: 8 mm. Outer length: 1425 mm. Inne...
€28,16 €23,27
KS Piston set, complete Ø 105 mm, piston pin 32 x 82 mm, Fendt, Renault
KS
Dimensions: 4 rings, Ø 105 mm, Gudgeon pin Ø 32 x 82 mm, Combustion chamber Ø 62 mm, Combustion chamber depth 19.8 mm, Dry liner. Menke no.: 72751.... More
Dimensions: 4 rings, Ø 105 mm, Gudgeon pin Ø 32 x 82 mm, Combustion ...
€426,93 €352,83 €392,78 €324,61
You save 8%
VICTOR REINZ Cylinder head gasket set ZKD 1,5 mm engine D226-3 - D226-6 Fendt
€47,05 €38,88 €43,29 €35,77
You save 8%
Borg Warner Fan clutch Fendt Favorit 611-615
€420,71 €347,69 €353,90 €292,48
You save 16%
Insulating plate exhaust Fendt Favorit 600-612
€106,33 €87,88 €97,82 €80,85
You save 8%
Oil line air filter Fendt Farmer 304-312, Favorit 511-615
€81,34 €67,22 €74,83 €61,85
You save 8%
V-belt for air conditioning Fendt
Version: For air conditioning. More
Version: For air conditioning.
€9,79 €8,09
Reservoir radiator Fendt
€132,59 €109,58 €121,98 €100,81
You save 8%
Radiator hose thermostat / water pump Ø 23 / 24 mm Fendt
€39,38 €32,55 €36,23 €29,94
You save 8%
Radiator hose water pump / suction line Ø 34 / 44 mm Fendt
€59,29 €49,00 €54,55 €45,08
You save 8%
Radiator hose water pump suction pipe Ø 32/36 mm Fendt
Inner Ø: 32 / 36 mm. More
Inner Ø: 32 / 36 mm.
€28,84 €23,83
Tank cap reservoir thread 48 mm
Version: Thread 48 mm, For expansion tank. More
Version: Thread 48 mm, For expansion tank.
€26,50 €21,90
Optibelt V-belt set Fendt Favorit 600-615 - 2 pieces
€32,90 €27,19 €30,27 €25,01
You save 8%
Connecting rod without bearing Fendt Farmer 304-312, Favorit 509-615
€322,84 €266,81 €297,01 €245,47
You save 8%
Valve guide inlet Fendt Farmer 304-312, Favorit 509-615
€33,62 €27,79 €30,93 €25,56
You save 8%
Piston set, complete 3 rings, Ø 105 mm, piston pin Ø 35 x 88 mm
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion chamber Ø 60 mm, Combustion chamber depth 21.7 mm. Description: Supplied withou... More
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion ...
€285,37 €235,84 €262,54 €216,98
You save 8%
Disc crankshaft standard Ø 70 mm Renault, Fendt
Dimensions: Ø 70 mm. More
Dimensions: Ø 70 mm.
€40,10 €33,14
Piston cooling nozzle Fendt
€149,86 €123,85 €143,61 €118,69
You save 4%
Collar bush speed adjustment Ø 12 / 18 / 22 mm, 2,5 / 5,5 mm Fendt
Ø: 12 / 18 / 22 mm. Length: 2,5 / 5,5 mm. More
Ø: 12 / 18 / 22 mm. Length: 2,5 / 5,5 mm.
€6,98 €5,76
Showing 337 - 384 of 568

Fendt Favorit 611 (Typ 382) specifications

The Fendt Favorit 611 LSA carries the internal type designation T 382 and was built from 1985 to 1993 exclusively with four-wheel drive. A total of 1,433 units were produced. The 611 LSA is the successor to the 611 LS (Typ 282) and at the same time the conclusion of a development line that began in 1972 with the Favorit 611 S. The LS version with rear-wheel drive falls under Typ FWA 282.

Production ran in two clearly distinct phases. In the first phase (chassis number T 382.250, 1985 to 1987, 228 units), the engine has no turbocharger and produces 115 hp. In the second phase (chassis number T 382.211, 1988 to 1993, 1,205 units), a turbocharger was added and the combustion process optimised, raising output to 125 hp while fuel consumption fell. The 611 LSA was succeeded in the line-up by the Favorit 500C series.

Hydraulics and lift system

The hydraulic tandem pump delivers 69 litres per minute (44 plus 25 litres) at 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available with a maximum lift capacity of 3,940 kg. The permissible front axle load is 3,050 kg and the rear axle load 5,400 kg. The permissible gross weight is 8,500 kg.

Engine

The second phase (1988 to 1993) uses an MWM TD 226-B 6, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection into the combustion bowl of the piston. The engine is fitted with individually mounted cylinder heads, piston crown cooling, an oil cooler, Rotocap valves, a viscous fan, an inline injection pump, a multi-hole injector, a dry air filter with pre-cleaner, pressure circulation lubrication, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,240 cc. Maximum torque is 497 Nm at 1,500 rpm. Injection pressure is 180 to 185 bar, raised to 650 bar from 1987.

The first phase (1985 to 1987) has a naturally aspirated MWM D 226.6.2 without turbocharger producing 115 hp, with a maximum torque of 412 Nm at 1,500 rpm.

Transmission and travel speed

The 611 LSA has a helical-cut ZF fully synchronised fine-step gearbox type T 3345 with side-mounted gear selection, offering 20 forward and 9 reverse gears. Top speed is 40 km/h in the standard version, with a 30 km/h version also available. In the 40 km/h version, the six gears in the fast range run from 3.88 to 38.41 km/h, in the slow range from 3.12 to 30.94 km/h and in the creep range from 4.71 to 27.41 km/h. From 1987, the Duospeed drive system was available as an option, along with an electronically controlled differential lock and a reversing unit.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft disc brake acts on the four-wheel drive; when the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. Steering is hydrostatically assisted.

Dimensions and weight

  • Unladen weight: 6,080 kg
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 223 g/kWh

Standard tyre sizes are 14.9-26 at the front and 18.4R38 at the rear. The cab is a rubber-mounted, vibration and sound-insulated safety cab with a noise level of 78 dB, air-suspended seat, digital tractor meter, fold-open front and rear windows, roof hatch, three-stage ventilation system, two-stage heating, radio preparation and height-adjustable steering wheel.

Difference from the 611 LS (Typ 282)

The difference between Typ 382 and Typ 282 is a recurring point when sourcing parts and when purchasing. The Typ 282 is the LS series, built from 1977 to 1984, available with either rear-wheel or four-wheel drive and producing 100 to 110 hp from a naturally aspirated engine. The Typ 382 is available exclusively with four-wheel drive, has a turbocharged engine in its second phase, a higher hydraulic pump output and higher permissible axle loads. The gearbox on both types is a ZF T 3345, but the configuration differs between phases.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart