Menu
EUR

Fendt Favorit 611 (Typ 382) parts

Looking for parts for your Fendt Favorit 611 (Typ 382) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

527 parts found for Fendt Favorit 611 (Typ 382)
Show:
VICTOR REINZ Crankshaft seal rear MWM, Fendt
€100,81 €83,31 €95,77 €79,15
You save 5%
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
€29,91 €24,72 €29,31 €24,22
You save 2%
VICTOR REINZ Cylinder head gasket set ZKD 1,5 mm engine D226-3 - D226-6 Fendt
€45,08 €37,26 €44,18 €36,51
You save 2%
GRANIT O-ring front cover 40 x 4 mm Fendt
GRANIT V-belt pulley Fendt Favorit 611-615
GRANIT Vibration damper radiator Fendt
€15,08 €12,46 €14,78 €12,21
You save 2%
GRANIT Cooling fan Ø 515 mm Fendt Favorit 611-615
€367,84 €304,00 €312,66 €258,40
You save 15%
GRANIT Fan clutch Fendt Favorit 611-615
€305,22 €252,25 €259,44 €214,41
You save 15%
GRANIT Radiator hose, bottom inner-Ø 35 mm, 100 mm Fendt Farmer, Favorit
GRANIT
Inner Ø: 35 mm. Length: 100 mm. More
Inner Ø: 35 mm. Length: 100 mm.
€11,56 €9,55 €11,33 €9,36
You save 2%
GRANIT Radiator hose thermostat / water pump Ø 24 mm Fendt
€33,46 €27,65 €32,79 €27,10
You save 2%
GRANIT Radiator hose water pump suction pipe Ø 32/36 mm Fendt
GRANIT
Inner Ø: 32 / 36 mm. More
Inner Ø: 32 / 36 mm.
€22,11 €18,27 €21,67 €17,91
You save 2%
GRANIT Solenoid valve cold start device Fendt Farmer, Favorit, XYLON, GT
€153,31 €126,70 €145,64 €120,36
You save 5%
GRANIT Connecting rod Ø 35 / 67 mm, length 207 mm Fendt
€1.613,90 €1.333,80 €1.371,82 €1.133,74
You save 15%
GRANIT Angle Fendt Favorit 600-615
€22,04 €18,21
GRANIT Turbocharger Fendt Favorit 611-615
€30,89 €25,53 €30,27 €25,02
You save 2%
GRANIT Pull handle Fendt Farmer 5S, 105, 106, 108
€60,21 €49,76 €59,01 €48,77
You save 2%
GRANIT Washers M14
€6,88 €5,69 €6,74 €5,57
You save 2%
GRANIT Seal oil return line turbocharger Fendt
€4,25 €3,51 €4,17 €3,45
You save 2%
GRANIT Gasket intermediate part exhaust Fendt Farmer 304-312, Favorit 509-612
€11,74 €9,70 €11,51 €9,51
You save 2%
GRANIT Cylinder head gasket set upper 1 cylinder, cylinder head gasket 0,85 mm thick Fendt
GRANIT Oil filler cap Fendt Farmer 102-312, Favorit 509-615, GT 231
€13,62 €11,26 €13,35 €11,03
You save 2%
GRANIT Lever steering valve SB7, 3-hole Fendt, Case IH, Steyr, Schlüter
€66,99 €55,36 €65,65 €54,26
You save 2%
GRANIT Window handle windshield without spring and set screw Fendt
GRANIT
Description: for windshield. More
Description: for windshield.
€28,22 €23,32 €27,66 €22,86
You save 2%
Showing 193 - 216 of 527

Fendt Favorit 611 (Typ 382) specifications

The Fendt Favorit 611 LSA carries the internal type designation T 382 and was built from 1985 to 1993 exclusively with four-wheel drive. A total of 1,433 units were produced. The 611 LSA is the successor to the 611 LS (Typ 282) and at the same time the conclusion of a development line that began in 1972 with the Favorit 611 S. The LS version with rear-wheel drive falls under Typ FWA 282.

Production ran in two clearly distinct phases. In the first phase (chassis number T 382.250, 1985 to 1987, 228 units), the engine has no turbocharger and produces 115 hp. In the second phase (chassis number T 382.211, 1988 to 1993, 1,205 units), a turbocharger was added and the combustion process optimised, raising output to 125 hp while fuel consumption fell. The 611 LSA was succeeded in the line-up by the Favorit 500C series.

Hydraulics and lift system

The hydraulic tandem pump delivers 69 litres per minute (44 plus 25 litres) at 180 bar. The rear three-point hitch achieves a maximum lift capacity of 7,410 kg. An optional front linkage with category II three-point hitch is available with a maximum lift capacity of 3,940 kg. The permissible front axle load is 3,050 kg and the rear axle load 5,400 kg. The permissible gross weight is 8,500 kg.

Engine

The second phase (1988 to 1993) uses an MWM TD 226-B 6, a water-cooled six-cylinder four-stroke inline turbodiesel engine with direct injection into the combustion bowl of the piston. The engine is fitted with individually mounted cylinder heads, piston crown cooling, an oil cooler, Rotocap valves, a viscous fan, an inline injection pump, a multi-hole injector, a dry air filter with pre-cleaner, pressure circulation lubrication, an exhaust turbocharger with pulse charging and thermostatically controlled dual-circuit cooling. Displacement is 6,240 cc. Maximum torque is 497 Nm at 1,500 rpm. Injection pressure is 180 to 185 bar, raised to 650 bar from 1987.

The first phase (1985 to 1987) has a naturally aspirated MWM D 226.6.2 without turbocharger producing 115 hp, with a maximum torque of 412 Nm at 1,500 rpm.

Transmission and travel speed

The 611 LSA has a helical-cut ZF fully synchronised fine-step gearbox type T 3345 with side-mounted gear selection, offering 20 forward and 9 reverse gears. Top speed is 40 km/h in the standard version, with a 30 km/h version also available. In the 40 km/h version, the six gears in the fast range run from 3.88 to 38.41 km/h, in the slow range from 3.12 to 30.94 km/h and in the creep range from 4.71 to 27.41 km/h. From 1987, the Duospeed drive system was available as an option, along with an electronically controlled differential lock and a reversing unit.

Power take-off

The PTO is switchable between 540 and 1,000 rpm. An optional front PTO is available.

Brakes and steering

The braking system consists of hydraulically operated full disc brakes on the rear wheels, usable as individual wheel brakes. A propshaft disc brake acts on the four-wheel drive; when the individual wheel brake is applied, the front wheel brake disengages automatically. The parking brake is mechanically operated as an internal shoe brake. Steering is hydrostatically assisted.

Dimensions and weight

  • Unladen weight: 6,080 kg
  • Fuel tank: 222 litres
  • Fuel consumption at maximum power: 223 g/kWh

Standard tyre sizes are 14.9-26 at the front and 18.4R38 at the rear. The cab is a rubber-mounted, vibration and sound-insulated safety cab with a noise level of 78 dB, air-suspended seat, digital tractor meter, fold-open front and rear windows, roof hatch, three-stage ventilation system, two-stage heating, radio preparation and height-adjustable steering wheel.

Difference from the 611 LS (Typ 282)

The difference between Typ 382 and Typ 282 is a recurring point when sourcing parts and when purchasing. The Typ 282 is the LS series, built from 1977 to 1984, available with either rear-wheel or four-wheel drive and producing 100 to 110 hp from a naturally aspirated engine. The Typ 382 is available exclusively with four-wheel drive, has a turbocharged engine in its second phase, a higher hydraulic pump output and higher permissible axle loads. The gearbox on both types is a ZF T 3345, but the configuration differs between phases.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart