Menu
EUR

Fendt Favorit 818 tractor parts & technical data

With more than 550 parts for the Fendt Favorit 818, this page covers lighting, electrics, trailer couplings and more, so you can quickly see what fits.

549 parts found for Fendt Favorit 818
Show:
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, with indicator light monitoring for commercial vehicles or tractors wi... More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with...
€51,08 €42,21 €46,20 €38,18
You save 10%
GRANIT Step 335 x 175 x 35 mm Fendt Farmer, Favorit, GT
GRANIT
Tractor types: Fendt Farmer 240S, 250S, 260P, 260S, 270P, 275S, 280P, 280S, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, 409, 410, 411, 412, 509,... More
Tractor types: Fendt Farmer 240S, 250S, 260P, 260S, 270P, 275S, 280P, ...
€65,49 €54,12 €62,20 €51,41
You save 5%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€627,55 €518,64
Wabco Connector head M22 x 1,5 black aluminum with valve, 8 bar
Wabco
Operating pressure max. (bar): 8 | Version: Black, aluminium, with valve, for vehicles | Vehicle/application: For single-line brake, towing vehicle | ... More
Operating pressure max. (bar): 8 | Version: Black, aluminium, with val...
€92,46 €76,41 €87,80 €72,56
You save 5%
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Fendt
GRAMMER
Seat heater: Yes | Lordosenstütze: Pneumatic | Seat type: MSG95AL/741 | - Storage pocket - APS: automatic positioning system - Left armrest, 80 x 380... More
Seat heater: Yes | Lordosenstütze: Pneumatic | Seat type: MSG95AL/741...
€4.876,30 €4.030,00 €4.632,45 €3.828,47
You save 5%
KS Piston ring set 3 rings Ø 108 mm, 3 mm / 2,5 mm / 4 mm Fendt
KS
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 2.5 mm / 4 m...
€57,08 €47,17 €54,20 €44,79
You save 5%
GRANIT End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
GRANIT
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 80 l/min., Tightening torque: 30 Nm, Connections: M12 x 1.5, Dimensions: 154... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€213,41 €176,37 €202,70 €167,52
You save 5%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 Fendt
GRAMMER
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Jo... More
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery typ...
€2.564,90 €2.119,75
Button Fendt, Case IH
€37,41 €30,92 €35,50 €29,34
You save 5%
Pin lift cylinder/lift arm 40 x 104 mm Fendt
Dimensions: 40 x 104 mm. More
Dimensions: 40 x 104 mm.
€92,12 €76,13 €87,50 €72,31
You save 5%
Wiper motor 12 V, 104°, A 61,5 mm Fendt, John Deere
Volts: 12. Angle: 104 °. A: 61,5 mm. Park position: Left. rpm: 45. More
Volts: 12. Angle: 104 °. A: 61,5 mm. Park position: Left. rpm: 45.
€201,51 €166,54 €191,40 €158,18
You save 5%
Hydraulic top link cat. 2, 620 - 881 mm, stroke 261 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: 35 mm. Cylinder Ø inner E: 70 mm. Check valve: Top. Lifting force: 6 t. Tensile... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: ...
€585,16 €483,60 €555,90 €459,42
You save 5%
GRANIT Locking pawl quick coupling cat. 1, 2 Fendt Farmer, Favorit
€84,70 €70,00 €76,60 €63,31
You save 10%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
GRANIT Temperature switch, oil temperature 102 °C, M14 x 1,5, 6 - 24 V
GRANIT
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1.5, Contact closes as the temperature increases, Outlet: 1-pin via earth, Switchi... More
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1....
€83,60 €69,09 €79,40 €65,62
You save 5%
Potentiometer linkage
Version: For lifting unit. More
Version: For lifting unit.
€372,55 €307,89
Start switch 12 V / 24 V, lock 14603-2 keys
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, 58, 0: off, 1: consumer, 2: start. Switching stages: 0-1-2. Plug: 7. Voltage ran... More
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, ...
€54,66 €45,17 €51,90 €42,89
You save 5%
Push button switch work light, top 12 / 24 V, button green, Ø 30 mm
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals 6.3 x 0.8 (L- R- 49a- 30b- 15- 49), dustproof and splashproof. More
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals...
€33,00 €27,27
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€55,42 €45,80 €52,60 €43,47
You save 5%
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 135 mm. Total height: 222 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€139,80 €115,54
Work lamp H3 55 W, angular, glass 130 x 80 mm, upright, 12 V
Bulb: 12V55W / H3. Form: Rectangular. Additional information: With swivel bracket, without switch, glass protected by protruding housing made of impac... More
Bulb: 12V55W / H3. Form: Rectangular. Additional information: With swi...
€40,24 €33,26 €38,20 €31,57
You save 5%
Showing 121 - 144 of 549

Fendt Favorit 818 parts: switches, hoses, lights and seats

Most Favorit 818 tractors have plenty of hours behind them, and at that stage it is the details that keep you busy. A switch that sticks, a split coolant hose, a work lamp that gives up halfway through the evening. This page lists more than 550 new parts that fit the Favorit 818, from GRANIT, HELLA, GRAMMER, ROCKINGER, Wabco and others.

Switchgear in the cab

The consoles of the Favorit 818 carry a large number of push button and rocker switches, each with its own symbol. You can get these switches separately, together with the indicator symbols and the rubber surrounds. Work lamps with their holders and brackets are here too, as is an alternator to feed all those consumers.

Before you swap a rocker switch, take a photo of the back with every wire still in place. On illuminated switches the terminals sit close together, and a crossed wire only shows up once the function fails or the backlight stays on.

Cooling and engine

  • Coolant hoses, including moulded rubber elbows
  • Gaskets for the water channel
  • Seals for the fuel sensors
  • Discs, pins and bushes for pivots and linkages

Fit new hose clamps whenever you replace a coolant hose. Old clamps have bedded into the rubber and often fail to seal a fresh hose. Squeeze the old hose before throwing it away. If it feels soft or flaky inside, other hoses of the same age are likely in similar condition. After refilling, bleed the system and check the level again once the engine has been up to temperature.

If a work lamp keeps failing, look at its holder before blaming the lamp. A cracked bracket lets the lamp shake on every bump, and that vibration shortens its life considerably.

Seat and access

For the cab there are tractor seats, including air suspended models, along with gas struts and grab handles for the body panels. A loose handle is more than cosmetic, since you pull your full weight on it every time you climb in.

Finding the matching part

The Favorit 818 is part of the Fendt Favorit 800 series. The chassis number on the data plate helps, because parts can differ by production period within one series. Hoses, gaskets and switches often have a reference number moulded or printed on them, which is the quickest route to the right replacement.

Other Favorit 800 models

Each sister model has its own page with the parts for that tractor:

For all other Fendt tractors, see Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart