Menu
EUR

Fendt Favorit 822 tractor parts & technical data

With more than 550 parts, the Fendt Favorit 822 from the Favorit 800 series is well covered here. Lighting, electrics and trailer couplings are among them.

544 parts found for Fendt Favorit 822
Show:
GRANIT Seal lubricating pipe turbocharger 56 x 32 mm, Ø 16 mm Fendt
GRANIT
Hole Ø: 9 mm. Width: 32 mm. Weight: 3 g. Inner Ø: 16 mm. Length: 56 mm. Thickness: 1,05 mm. More
Hole Ø: 9 mm. Width: 32 mm. Weight: 3 g. Inner Ø: 16 mm. Length: 56 ...
€13,65 €11,28
Turbocharger to the exhaust Fendt
€73,28 €60,56 €69,60 €57,52
You save 5%
GRANIT Clamp lock Fendt
€2,01 €1,66
GRANIT Exhaust valve guide Ø 10 x 16 mm, length 55 mm Fendt
€42,92 €35,47 €40,75 €33,68
You save 5%
Outlet valve Fendt engine MAN D 0824, D 0826
€55,64 €45,98 €52,85 €43,68
You save 5%
Connecting rod bolt M12 x 1,5, 60 mm Fendt
Male thread: M12 x 1,5. Weight: 59 g. Thread: M12 x 1.5. Length: 60 mm. Weight: 0.12 kg. More
Male thread: M12 x 1,5. Weight: 59 g. Thread: M12 x 1.5. Length: 60 mm...
€12,15 €10,04
GRANIT Cylinder head bolt M14 x 140 mm Fendt
GRANIT
Dimensions: M14 x 140 mm. More
Dimensions: M14 x 140 mm.
€24,00 €19,83
GRANIT Crankshaft seal for Ø 66 x 90 x 12 mm Fendt
GRANIT
Menke no.: 209364. More
Menke no.: 209364.
€38,80 €32,07 €36,85 €30,45
You save 5%
GRANIT Volume regulator Fendt, Deutz-Fahr
€169,05 €139,71 €160,55 €132,69
You save 5%
Steering valve 5/4 manual operated 210 bar, 90 l/min, M22 x 1,5 Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow: min. 90 l/min., Operating material: hydraulic oil, Tightening torque: 30 Nm, Connectio... More
Technical data: Max. operating pressure: 210 bar, Nominal flow: min. 9...
€875,25 €723,35 €831,45 €687,15
You save 5%
GRANIT Plate hinge mount rear window Fendt
Hinge pin rear window 55 mm Fendt Farmer 105 (Typ 258), Xylon 524
Hammer head bolt M27 Fendt
Menke no.: 208515. More
Menke no.: 208515.
€121,31 €100,26 €115,20 €95,21
You save 5%
GRANIT Spring three-point Fendt
€29,65 €24,50
Piston rod DW linkage Fendt
€497,19 €410,90 €472,30 €390,33
You save 5%
Lift cylinder DW 40/90 mm, length 457 mm, eye Ø 40 mm Fendt
Eye Ø: 40 mm. Length: 457 mm. Piston rod Ø: 40 mm. Piston Ø: 90 mm. More
Eye Ø: 40 mm. Length: 457 mm. Piston rod Ø: 40 mm. Piston Ø: 90 mm.
€1.395,13 €1.153,00 €1.325,35 €1.095,33
You save 5%
Nut for clevis lower Fendt
GRANIT Angle sensor front axle, uitschakelsensor
GRANIT
Version: Function: switch-off sensor. Menke no.: 207686. More
Version: Function: switch-off sensor. Menke no.: 207686.
€277,50 €229,34
Showing 505 - 528 of 544

Fendt Favorit 822 parts for the cab, work lights and cooling

Plenty of Favorit 822 tractors have put in a long working life, and at that age it is the many small parts that keep the machine comfortable and usable. This page lists more than 550 parts that fit the Fendt Favorit 822, with GRANIT next to HELLA, Wabco, GRAMMER and ROCKINGER.

At this age it is rarely the big assemblies that cause grief, but the many small things together: a loose grab handle, a switch that no longer springs back, a hose that sweats. Replacing those in time keeps the Favorit 822 pleasant and safe to work with, especially for anyone who spends long days in the cab.

Cooling system

Radiator hoses, including a lower rubber elbow, gaskets for the water channel and seals for the tank sensor keep the engine and cooling circuit tight. For keeping the battery topped up, a choice of alternators is available too. After replacing a coolant hose, top up with the correct type of coolant and let the engine warm up with the cap off until no more bubbles rise. Trapped air is a common reason for an engine that runs hot right after a hose change.

Inside the cab

Getting in and out every day wears down a lot of cab parts. There are air suspended tractor seats such as the Maximo Professional, handles, push buttons, rocker switches and indicator symbols for the switch panel. Gas struts hold the windscreen frame and the doors open, and a separate disc is available for the rear screen hinge. Rubber discs and pins round things off. Replace the windscreen frame struts as a pair so the frame is not pulled out of line.

Work lamps and brackets

Work lamps come in many versions, for example an angular spotlight for flush mounting, along with holders and brackets to fit them. When you change a lamp, clean the plug and the earth connection too. Weak or flickering light is very often caused by a corroded contact rather than by the lamp itself.

Type plate and related models

Look at the type plate to confirm you have a Favorit 822. After that, a reference number on the old part is the surest guide. The tractor belongs to the Fendt Favorit 800 series, and the related types from that series have their own pages: Fendt Favorit 816 and Fendt Favorit 818. For every other tractor of the make, head to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart