Menu
EUR

Fendt Favorit 822 tractor parts & technical data

With more than 550 parts, the Fendt Favorit 822 from the Favorit 800 series is well covered here. Lighting, electrics and trailer couplings are among them.

544 parts found for Fendt Favorit 822
Show:
GRANIT Bar three-point parts Fendt
€29,80 €24,63
GRANIT Seal profile roof hatch Fendt Farmer 307 (Typ 117), Xylon 524
€129,95 €107,40
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
GRANIT
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€55,61 €45,96 €52,80 €43,64
You save 5%
Reservoir Fendt Farmer 307 (Typ 117), Xylon 524
€68,23 €56,39 €61,70 €50,99
You save 10%
GRANIT Intermediate part rear fender 145 mm Fendt
GRANIT
Dimensions: 145 mm. More
Dimensions: 145 mm.
€334,91 €276,79 €303,00 €250,41
You save 10%
Pin for top link 25,4 x 140 mm Fendt
Dimensions: 25.4 x 140 mm. More
Dimensions: 25.4 x 140 mm.
€46,98 €38,83 €44,60 €36,86
You save 5%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
GRANIT Headlight panel Fendt
€410,70 €339,42
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
HELLA Headlight left / right 12 V, H4, 182 x 102 x 94 mm, built-in
HELLA
Bulb: 12V60/55W / H4. Colour: Lens: white/transparent. Width: 182 mm. Height: 102 mm. Material: Plastic. Housing: Plastic. Dimensions W x H x D: 182 x... More
Bulb: 12V60/55W / H4. Colour: Lens: white/transparent. Width: 182 mm. ...
€84,95 €70,21
GRANIT Beacon H1 Quasarino orange 12 V, Ø 130 mm, 204 mm, push-on pin
GRANIT
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 130 mm. Total height: 204 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€44,16 €36,50 €39,95 €33,02
You save 10%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€37,00 €30,58
HELLA Holder bracket for work lights
HELLA
To fit: Work light. Mounting type: Bracket mounting. More
To fit: Work light. Mounting type: Bracket mounting.
€11,95 €9,88
GRANIT Step 335 x 175 x 35 mm Fendt Farmer, Favorit, GT
GRANIT
Tractor types: Fendt Farmer 240S, 250S, 260P, 260S, 270P, 275S, 280P, 280S, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, 409, 410, 411, 412, 509,... More
Tractor types: Fendt Farmer 240S, 250S, 260P, 260S, 270P, 275S, 280P, ...
€65,49 €54,12 €62,20 €51,41
You save 5%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€627,55 €518,64
Wabco Trailer control valve 0 - 0,5 bar activation, 14 bar final pressure, 2 m³
Wabco
Set pressure (bar): 0-0,5 | Displacement (m³): 2 | End pressure (bar): 14 More
Set pressure (bar): 0-0,5 | Displacement (m³): 2 | End pressure (bar)...
€1.765,39 €1.459,00 €1.677,10 €1.386,03
You save 5%
KS Piston ring set 3 rings Ø 108 mm, 3 mm / 2,5 mm / 4 mm Fendt
KS
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 2.5 mm / 4 m...
€57,08 €47,17 €54,20 €44,79
You save 5%
Silencer Fendt Favorit 816-824, 916-926
€2.623,72 €2.168,36 €2.492,50 €2.059,92
You save 5%
GRANIT End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
GRANIT
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 80 l/min., Tightening torque: 30 Nm, Connections: M12 x 1.5, Dimensions: 154... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€213,41 €176,37 €202,70 €167,52
You save 5%
GRAMMER Tractor seat Maximo Professional MSG95AL/731 Fendt
GRAMMER
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Jo... More
To fit: Fendt, old bracket. Suspension: Air suspension. Upholstery typ...
€2.564,90 €2.119,75
Button Fendt, Case IH
€37,41 €30,92 €35,50 €29,34
You save 5%
GRANIT Pin DW hydraulic cylinder lower 40 x 143 mm Fendt, Massey Ferguson
GRANIT
Dimensions: 40 x 143 mm. More
Dimensions: 40 x 143 mm.
€140,46 €116,08 €133,40 €110,25
You save 5%
Showing 97 - 120 of 544

Fendt Favorit 822 parts for the cab, work lights and cooling

Plenty of Favorit 822 tractors have put in a long working life, and at that age it is the many small parts that keep the machine comfortable and usable. This page lists more than 550 parts that fit the Fendt Favorit 822, with GRANIT next to HELLA, Wabco, GRAMMER and ROCKINGER.

At this age it is rarely the big assemblies that cause grief, but the many small things together: a loose grab handle, a switch that no longer springs back, a hose that sweats. Replacing those in time keeps the Favorit 822 pleasant and safe to work with, especially for anyone who spends long days in the cab.

Cooling system

Radiator hoses, including a lower rubber elbow, gaskets for the water channel and seals for the tank sensor keep the engine and cooling circuit tight. For keeping the battery topped up, a choice of alternators is available too. After replacing a coolant hose, top up with the correct type of coolant and let the engine warm up with the cap off until no more bubbles rise. Trapped air is a common reason for an engine that runs hot right after a hose change.

Inside the cab

Getting in and out every day wears down a lot of cab parts. There are air suspended tractor seats such as the Maximo Professional, handles, push buttons, rocker switches and indicator symbols for the switch panel. Gas struts hold the windscreen frame and the doors open, and a separate disc is available for the rear screen hinge. Rubber discs and pins round things off. Replace the windscreen frame struts as a pair so the frame is not pulled out of line.

Work lamps and brackets

Work lamps come in many versions, for example an angular spotlight for flush mounting, along with holders and brackets to fit them. When you change a lamp, clean the plug and the earth connection too. Weak or flickering light is very often caused by a corroded contact rather than by the lamp itself.

Type plate and related models

Look at the type plate to confirm you have a Favorit 822. After that, a reference number on the old part is the surest guide. The tractor belongs to the Fendt Favorit 800 series, and the related types from that series have their own pages: Fendt Favorit 816 and Fendt Favorit 818. For every other tractor of the make, head to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart