Menu
EUR

Fendt Favorit 822 tractor parts & technical data

With more than 550 parts, the Fendt Favorit 822 from the Favorit 800 series is well covered here. Lighting, electrics and trailer couplings are among them.

544 parts found for Fendt Favorit 822
Show:
Pin lift cylinder/lift arm 40 x 104 mm Fendt
Dimensions: 40 x 104 mm. More
Dimensions: 40 x 104 mm.
€92,12 €76,13 €87,50 €72,31
You save 5%
Wiper motor 12 V, 104°, A 61,5 mm Fendt, John Deere
Volts: 12. Angle: 104 °. A: 61,5 mm. Park position: Left. rpm: 45. More
Volts: 12. Angle: 104 °. A: 61,5 mm. Park position: Left. rpm: 45.
€201,51 €166,54 €191,40 €158,18
You save 5%
Hydraulic top link cat. 2, 620 - 881 mm, stroke 261 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: 35 mm. Cylinder Ø inner E: 70 mm. Check valve: Top. Lifting force: 6 t. Tensile... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: ...
€585,16 €483,60 €555,90 €459,42
You save 5%
GRANIT Locking pawl quick coupling cat. 1, 2 Fendt Farmer, Favorit
€84,70 €70,00 €76,60 €63,31
You save 10%
Gaiter front power lift 119 x 375 mm Fendt
Dimensions: 119 x 375 mm. More
Dimensions: 119 x 375 mm.
€96,90 €80,08 €92,00 €76,03
You save 5%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
GRANIT Temperature switch, oil temperature 102 °C, M14 x 1,5, 6 - 24 V
GRANIT
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1.5, Contact closes as the temperature increases, Outlet: 1-pin via earth, Switchi... More
Version: Temperature switching point: 102°C ± 3°C, Thread: M14 x 1....
€83,60 €69,09 €79,40 €65,62
You save 5%
Potentiometer clutch pedal and gear lever
Version: Clutch pedal (position) and gear shift (driving range detection level 1 or 2). More
Version: Clutch pedal (position) and gear shift (driving range detecti...
€132,78 €109,74 €120,10 €99,26
You save 10%
Potentiometer linkage
Version: For lifting unit. More
Version: For lifting unit.
€372,55 €307,89
Start switch 12 V / 24 V, lock 14603-2 keys
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, 58, 0: off, 1: consumer, 2: start. Switching stages: 0-1-2. Plug: 7. Voltage ran... More
Version: 12 V/24 V, with 7 blade terminals, contacts 15, 30, 50a, 54, ...
€54,66 €45,17 €51,90 €42,89
You save 5%
GRANIT Toggle switch front work light
GRANIT
Version: Front work light, rear work light. More
Version: Front work light, rear work light.
€79,72 €65,88 €72,10 €59,59
You save 10%
Push button switch work light, top 12 / 24 V, button green, Ø 30 mm
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals 6.3 x 0.8 (L- R- 49a- 30b- 15- 49), dustproof and splashproof. More
Version: 12/24 V, Green button, with lock, Ø 30 mm, 6 blade terminals...
€33,00 €27,27
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€55,42 €45,80 €52,60 €43,47
You save 5%
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 135 mm. Total height: 222 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€139,80 €115,54
Work lamp H3 55 W, angular, glass 130 x 80 mm, upright, 12 V
Bulb: 12V55W / H3. Form: Rectangular. Additional information: With swivel bracket, without switch, glass protected by protruding housing made of impac... More
Bulb: 12V55W / H3. Form: Rectangular. Additional information: With swi...
€40,24 €33,26 €38,20 €31,57
You save 5%
GRANIT Reflector round red Ø 80 mm, bore Ø 5,5 mm, screwed
GRANIT
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole Ø: 5.5 mm. Material: Plastic. More
Form: Round. Mounting type: Bolted. Colour: Red. Total Ø: 80 mm. Hole...
€6,60 €5,45
GRANIT Spring for rotating beacon holder
HELLA Work lamp spotlight H3 12 / 24 V, 158 x 162 x 127 mm, bracket assembly
HELLA
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 158 x 162 x 127 mm. Light function: Far-reaching illumination. Connection: Open c... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€72,80 €60,17
Gear change gate Fendt
To fit as: Fendt Farmer 4S, 5S, 102, 103, 104, 105, 106, 108, 240, 250, 260, 270, 275, 280, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, GT 345, ... More
To fit as: Fendt Farmer 4S, 5S, 102, 103, 104, 105, 106, 108, 240, 250...
€11,95 €9,88
MANN-FILTER Cab filter CUK4130/1
€117,27 €96,92 €73,25 €60,54
You save 38%
Top link ball cat. 3 Ø 59 mm Fendt
Tractor types: Fendt Farmer 409, 410, 411, 412. Fendt Farmer 600, 610, 612, 614, 615, 711, 712, 714, 716, 816, 818, 822, 824, 916, 920, 924, 926. Fend... More
Tractor types: Fendt Farmer 409, 410, 411, 412. Fendt Farmer 600, 610,...
€33,48 €27,67 €31,80 €26,28
You save 5%
Showing 121 - 144 of 544

Fendt Favorit 822 parts for the cab, work lights and cooling

Plenty of Favorit 822 tractors have put in a long working life, and at that age it is the many small parts that keep the machine comfortable and usable. This page lists more than 550 parts that fit the Fendt Favorit 822, with GRANIT next to HELLA, Wabco, GRAMMER and ROCKINGER.

At this age it is rarely the big assemblies that cause grief, but the many small things together: a loose grab handle, a switch that no longer springs back, a hose that sweats. Replacing those in time keeps the Favorit 822 pleasant and safe to work with, especially for anyone who spends long days in the cab.

Cooling system

Radiator hoses, including a lower rubber elbow, gaskets for the water channel and seals for the tank sensor keep the engine and cooling circuit tight. For keeping the battery topped up, a choice of alternators is available too. After replacing a coolant hose, top up with the correct type of coolant and let the engine warm up with the cap off until no more bubbles rise. Trapped air is a common reason for an engine that runs hot right after a hose change.

Inside the cab

Getting in and out every day wears down a lot of cab parts. There are air suspended tractor seats such as the Maximo Professional, handles, push buttons, rocker switches and indicator symbols for the switch panel. Gas struts hold the windscreen frame and the doors open, and a separate disc is available for the rear screen hinge. Rubber discs and pins round things off. Replace the windscreen frame struts as a pair so the frame is not pulled out of line.

Work lamps and brackets

Work lamps come in many versions, for example an angular spotlight for flush mounting, along with holders and brackets to fit them. When you change a lamp, clean the plug and the earth connection too. Weak or flickering light is very often caused by a corroded contact rather than by the lamp itself.

Type plate and related models

Look at the type plate to confirm you have a Favorit 822. After that, a reference number on the old part is the surest guide. The tractor belongs to the Fendt Favorit 800 series, and the related types from that series have their own pages: Fendt Favorit 816 and Fendt Favorit 818. For every other tractor of the make, head to Fendt parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart