Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Fiat 45-66

Looking for parts for your Fiat 45-66 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

181 parts found for Fiat 45-66
Show:
GRANIT Steering cylinder eye-Ø 22 mm, stroke 202 mm
GRANIT
Technical data: Eye Ø: 20 mm Stroke: 202 mm. More
Technical data: Eye Ø: 20 mm Stroke: 202 mm.
€406,79 €336,19 €386,45 €319,38
You save 5%
GRANIT Water pump with connecting flange and seal engine Ford, Fiat, Renault
GRANIT
Description: With gasket. More
Description: With gasket.
€125,51 €103,73 €119,20 €98,51
You save 5%
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
Tube exhaust curved vertical enamelled 700 mm Fiat series 46-94
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700 mm. More
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700...
€47,88 €39,57 €45,45 €37,56
You save 5%
Oil pump Fiat 350-855
GRANIT Steering valve ew/dw with float position 220 bar, 70 l/min
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 70 l/min, Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 210 ... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€901,21 €744,80 €856,10 €707,52
You save 5%
Hydraulic pump single 16 cm³/rpm. anticlockwise, taper 1:8
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 48,1 mm. B: 108,2 mm. Direction of rotation: Anticlockwise. Line connection suction sid... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 48,1 mm...
€150,96 €124,76 €143,40 €118,51
You save 5%
GRANIT Lift arm shaft 487 mm, Ø bearing 25 mm Fiat, New Holland
GRANIT
Dimensions: Length = 487, Bearing Ø = 25 mm. More
Dimensions: Length = 487, Bearing Ø = 25 mm.
€108,27 €89,48 €102,85 €85,00
You save 5%
GRANIT Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
GRANIT
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€24,15 €19,96
GRANIT Brake light switch mechanical make contact, M3-5, 12 / 24 V
GRANIT
To fit as: Case IH 323, 353, E 353, 383, 423, E 423, 433, 453, 533, 633, 733, 833 523, 553, 554, 654, 724, 824, Fiat 35-66, 45-66, 45-66S, 50-66, 50-6... More
To fit as: Case IH 323, 353, E 353, 383, 423, E 423, 433, 453, 533, 63...
€35,00 €28,93
GRANIT Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
GRANIT
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade terminal 6.3 mm, Colour: white. To fit: BMW, Mercedes-Benz. More
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade t...
€25,60 €21,16
Cobo Multifunction switch horn, lighting, indicator
Cobo
Version: For horn, lights, indicators, headlight flasher. More
Version: For horn, lights, indicators, headlight flasher.
€150,64 €124,50 €143,10 €118,26
You save 5%
Cobo Rocker switch windshield wiper and nozzle, 7 connections
Cobo
Version: 12 V/24 V, On/off switch, 7 blade terminals, Installation dimension: 15 mm wide, 29 mm long and 34 mm high. More
Version: 12 V/24 V, On/off switch, 7 blade terminals, Installation dim...
€55,80 €46,12 €50,45 €41,69
You save 10%
GRANIT Rotary switch lighting and horn black, 6 blade terminals, 10 A
GRANIT
Version: Functions: lights, horn, With 6 blade terminals, Power rating: 12 V = 20 A (parking light), 12 V = 10 A (full beam, dipped beam), 12 V = 5 A ... More
Version: Functions: lights, horn, With 6 blade terminals, Power rating...
€50,45 €41,69 €45,60 €37,69
You save 10%
Starter switch 12 V, blade terminal, parking light, Ø 40 mm
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Housing Ø 40 mm. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€27,50 €22,73
LUK Thrust bearing 65 x 100 x 18 mm
LUK
Dimensions (mm): 65 x 100 x 18 More
Dimensions (mm): 65 x 100 x 18
€107,45 €88,80 €102,00 €84,30
You save 5%
LUK Double clutch 250/250TGU6 31 x 35 mm 18 splines Fiat
LUK
Dimensions (mm): 31 x 35 18 grooves | Flywheel design: Flat More
Dimensions (mm): 31 x 35 18 grooves | Flywheel design: Flat
€746,27 €616,75 €708,95 €585,91
You save 5%
Alternator 14 V / 55 A, pulley-Ø 82 mm, flange 72 mm
Additional information: Connections: B+ (M6), D+ (M5) | Installation angle (°): 0 | Flange size (mm): 72,0 | Belt width (mm) / type: 9,7 | Pulley spa... More
Additional information: Connections: B+ (M6), D+ (M5) | Installation a...
€173,96 €143,77 €165,25 €136,57
You save 5%
GRANIT Ball joint 80 mm, 5/8" x 18, M20 x 1, taper 18 - 20,2 mm
GRANIT
A: 80 mm. C: 5/8" x 18 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 80 mm. C: 5/8" x 18 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper:...
€38,75 €32,02
LUK Pilot bearing 17 x 47 x 14 mm
LUK
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836. More
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836.
€32,31 €26,70 €30,65 €25,33
You save 5%
Showing 49 - 72 of 181

Parts for your Fiat 45-66 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Fiat 45-66. We also offer the right parts for all other tractor types from Fiat. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Fiat 45-66. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Fiat 45-66. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Fiat

Fiat was founded in Turin, Italy, in 1899 by Giovanni Agnelli, an industrialist. Fiat stands for Fabricca Italiana Automobili Torino. The company started by producing cars and trucks. Later, stationary and marine engines, railway equipment, and even airplanes were built.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart