Menu
EUR

Fiat 60-66 tractor parts & technical data

Lighting, electrics, brakes and transmission: this page gathers more than 200 parts for the Fiat 60-66 from the 66 series, ready to browse by tractor model.

217 parts found for Fiat 60-66
Show:
Spacer 85 x 89 x 6 mm Fiat series 66-94
Dimensions: 85 x 89 x 6 mm. More
Dimensions: 85 x 89 x 6 mm.
€35,16 €29,06
Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
Dimensions: 55 x 70 x 8/8.5 mm. More
Dimensions: 55 x 70 x 8/8.5 mm.
€3,76 €3,11
Lift rod Ø 22 mm, yoke 37 mm, M27 Fiat
Dimensions: Thread = M27, Clevis width = 37, Bore Ø = 22 mm. More
Dimensions: Thread = M27, Clevis width = 37, Bore Ø = 22 mm.
€106,48 €88,00 €97,96 €80,96
You save 8%
AL-KO Chock UK 800 folding, 2.500 kg, tires radius 830 mm
AL-KO
Static tyre radius up to max.: 830 mm. More
Static tyre radius up to max.: 830 mm.
€114,26 €94,43 €109,22 €90,27
You save 4%
Chock folding Fiat, Ford, New Holland
€103,91 €85,88 €95,60 €79,01
You save 8%
Lock pin 16 x 70 mm galvanized
A: 16 mm. B: 70 mm. C: 35 mm. Version: galvanised. More
A: 16 mm. B: 70 mm. C: 35 mm. Version: galvanised.
€9,36 €7,74
Temperature sensor thread M22 x 1,5, 25-100 °C
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C. More
Version: Thread: M22 x 1.5. Temperature: 25 - 100 °C.
€19,71 €16,29
HELLA Push button switch engine start and horn, black, bore-Ø 22,3 mm
HELLA
Version: For engine start and horn, moisture-proof push button, 2 blade terminals 6.3 mm, black push button, for wall thickness up to max. 5 mm, short... More
Version: For engine start and horn, moisture-proof push button, 2 blad...
€18,23 €15,06
Cobo Lamp glass left
Cobo
Installation location: Left. More
Installation location: Left.
€19,43 €16,05
Cobo Indicator/position light 169 x 62 x 90 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 mm. Form: Rectangular. Height: 62 mm. Dimensions W x H x D: 169 x 62 x 90 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 ...
€50,01 €41,33 €46,01 €38,02
You save 8%
Hand brake cable 690 mm Fiat 60-56, 60-66, 55-88 - 88-94
To fit as: Fiat 60-56, 60-66, 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 80-90, 85-90, 60-93, 65-93, 72-93, 82-93, 88-93, 60-94, 6... More
To fit as: Fiat 60-56, 60-66, 55-88, 60-88, 65-88, 70-88, 80-88, 55-90...
€63,76 €52,69 €58,66 €48,48
You save 8%
Clamp Ø 46 mm Fiat 466-780
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-46, 60-46, 65-46, 55-56, 60-56, 65-56, 70-56, 55-60, 45-66, 50-66, 55-66, 60-66, ... More
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-4...
€17,00 €14,05
Steering cylinder eye-Ø 22 mm, stroke 202 mm
Technical data: Eye Ø: 20 mm Stroke: 202 mm. More
Technical data: Eye Ø: 20 mm Stroke: 202 mm.
€424,49 €350,82 €390,53 €322,75
You save 8%
LUK Pilot bearing 17 x 47 x 14 mm
LUK
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836. More
Dimensions: 17 x 47 x 14 mm. Menke no.: 167836.
€38,59 €31,89
Plastic fitting Ø 31 mm Ford, Fiat
Dimensions: Ø 31 mm. More
Dimensions: Ø 31 mm.
€25,86 €21,37
O-ring 25 x 3,53 mm Ford, Case IH, Fiat, New Holland
Dimensions: 25 x 3.53 mm. More
Dimensions: 25 x 3.53 mm.
€1,90 €1,57
Seal oil pump Ford, Fiat
Silencer vertical 680 mm, inner Ø 45 mm Ford, Fiat
Version: Length: 680 mm, Inner Ø: 45 mm. More
Version: Length: 680 mm, Inner Ø: 45 mm.
€81,28 €67,17 €74,78 €61,80
You save 8%
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., taper 1:8, Ø 17,46 mm, clockwise
Bosch/Rexroth
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Bosch no.: 0510525046. More
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€459,16 €379,47 €422,43 €349,11
You save 8%
Bosch/Rexroth Hydraulic pump clockwise 19 cm³/rpm., taper 1:8, Ø 17,46 mm
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Line connection suction side: Ø 40mm, 4-Loch, M8. Line conn... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€436,15 €360,45 €401,26 €331,62
You save 8%
Spacer 25 x 42 x 24 mm Case IH, Fiat, New Holland
Dimensions: 25 x 42 x 24 mm. More
Dimensions: 25 x 42 x 24 mm.
€27,15 €22,44
Pin Ø 20 mm, length 60 mm Fiat
Dimensions: Length = 60, Ø = 20 mm. More
Dimensions: Length = 60, Ø = 20 mm.
€8,59 €7,10
Holder right Fiat Series 66-94
€57,85 €47,81 €53,22 €43,99
You save 8%
Cobo Push button switch built-in make contact 12 V/30 A, 24 V/20 A, IP40
Cobo
Version: For flush mounting, make contact, normally off, 12 V / 30 A inductive, 24 V / 20 A inductive, IP40. Reference no.: 336.019.006. More
Version: For flush mounting, make contact, normally off, 12 V / 30 A i...
€21,41 €17,70
Cobo Replacement key plastic-coated black
Cobo
Version: To fit: Case IH, Fiat, Volvo + Cobo: 22714132000, 22714159000. More
Version: To fit: Case IH, Fiat, Volvo + Cobo: 22714132000, 22714159000...
€13,89 €11,48
Cobo Lamp glass right
Cobo
Installation location: Right. More
Installation location: Right.
€19,43 €16,05
Cobo Lamp glass left
Cobo
Installation location: Left. Menke no.: 55039. More
Installation location: Left. Menke no.: 55039.
€29,03 €23,99
Gaiter Ø upper 14 mm, lower 43 mm Fiat 670-980
To fit as: Fiat 570, 670, 580, 680, 780, 880, 880-5, 980, 45-66, 45-66S, 50-66, 50-66S, 60-66, 65-66, 80-66 More
To fit as: Fiat 570, 670, 580, 680, 780, 880, 880-5, 980, 45-66, 45-66...
€3,11 €2,57
Tube exhaust curved vertical enamelled 700 mm, Ø 49 mm Fiat
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-46, 60-46, 65-46, 55-56, 60-56, 65-56, 70-56, 55-60, 45-66, 50-66, 55-66, 60-66, ... More
To fit as: Fiat 446, 466, 566, 666, 766, 570, 670, 580, 680, 780, 55-4...
€49,96 €41,29 €45,96 €37,99
You save 8%
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€24,35 €20,12
Thrust washer Ø 171,1 x 94,3 mm, thickness 2,65 mm
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm. More
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm.
€23,60 €19,50
Cooling fan Ford, Case IH, Fiat, New Holland
€94,51 €78,11 €86,95 €71,86
You save 8%
Exhaust manifold 3 cylinder Fiat, Ford, New Holland
Version: 3-cylinder. More
Version: 3-cylinder.
€85,80 €70,91 €78,94 €65,24
You save 8%
Showing 145 - 192 of 217

Fiat 60-66 parts: clutch, hydraulics, steering and more

The Fiat 60-66 is the kind of tractor you can still keep going yourself with a decent set of tools. There are more than 200 new parts listed for it, made by GRANIT, Cobo, LUK, Eaton and Scharmüller.

What you can get for the 60-66

The driveline is covered with clutch kits and thrust bearings for the driving clutch. For the hydraulics there are hydraulic pumps and the seal for the lift shaft. Steering ball joints, engine gaskets such as the one for the rear cover, and thermostats with their O-rings follow. Alternators and push button switches deal with the electrics, LED main headlights and loose lamp glass with the lighting, and there are tank caps, exhaust tubes and holders as well.

Identifying the right part

The 66 series came in several versions, so check the serial plate for 60-66 before anything else. Alternators, hydraulic pumps and clutch pressure plates nearly always carry a number. Note it down and compare it with the product details. For a ball joint, measure the taper and thread on the old one.

Shop notes

  • Clutch: always replace the thrust bearing during a clutch job. It is a small cost next to the work of splitting the tractor, and a worn bearing that starts to whine will have you splitting it again a few months later. Check the flywheel for blue spots and scoring while it is open.
  • Hydraulic pump: pumps turn one way only. Check the plate on the old pump for clockwise or anticlockwise rotation before ordering, and prime the new pump with oil so it does not start dry.
  • Brakes: replace the O-rings in a brake cylinder as a set, never one at a time.

Oil on the lift arms

If oil is creeping out along the lift shaft and dirt sticks to the lift arms, the lift shaft seal needs changing. Clean the shaft well before the new seal goes on and check the running surface for a groove. On a worn shaft even a new seal will soon leak again. Fit the seal with the open side facing the oil and drive it in square with a suitable tube or sleeve. For the lights, a cracked lamp glass can be replaced on its own, so there is no need to buy a whole headlight.

More from the 66 series

These tractors from the same series each have their own parts page:

Each one shows only what belongs to that model, which saves guesswork when there are several Fiats on the yard. Every other model from the brand is on Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart