Menu
EUR

Fiat 60-88 tractor parts & technical data

From lighting and electrics to brake and transmission parts, the Fiat 60-88 from the 88 series is covered here with more than 200 matching items.

225 parts found for Fiat 60-88
Show:
GRANIT Connecting rod bearing standard, Ø 63,73 mm
GRANIT
Dimensions: Ø 63.73 mm. More
Dimensions: Ø 63.73 mm.
€11,70 €9,67
Tube exhaust curved vertical enamelled 700 mm Fiat series 46-94
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700 mm. More
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700...
€47,88 €39,57 €45,45 €37,56
You save 5%
GRANIT Piston ring set Ø 104 mm, 2,5 mm / 2,5 mm / 4 mm Fiat
GRANIT
Dimensions: 3 rings, Ø 104 mm, 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 104 mm, 2.5 mm / 2.5 mm / 4 mm.
€36,85 €30,45
GRANIT Piston set, complete Ø 104 mm, chamber Ø 52,3 x 22,5 mm Fiat
GRANIT
Dimensions: 3 rings, Ø 104 mm, Gudgeon pin Ø 38 x 85 mm, Combustion chamber Ø 52.3 mm, Combustion chamber depth 22.5 mm, Dry liner. More
Dimensions: 3 rings, Ø 104 mm, Gudgeon pin Ø 38 x 85 mm, Combustion ...
€204,89 €169,33 €194,60 €160,83
You save 5%
GRANIT Oil sump gasket set 3-cylinder Fiat
GRANIT Seal rear cover engine Fiat
Hydraulic pump single 16 cm³/rpm. anticlockwise, taper 1:8
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 48,1 mm. B: 108,2 mm. Direction of rotation: Anticlockwise. Line connection suction sid... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 48,1 mm...
€150,96 €124,76 €143,40 €118,51
You save 5%
Bosch/Rexroth Hydraulic pump 14 cm³/rpm., taper 1:8, Ø 17,46, 7/16-20 UNF, left Fiat
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: Anticlockwise. Output volume: 14 cc/rev. Line connection suction side: Ø 40mm, ... More
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: ...
€490,49 €405,36 €465,95 €385,08
You save 5%
GRANIT Pin Ø 20 mm, length 60 mm Fiat
GRANIT
Dimensions: Length = 60, Ø = 20 mm. More
Dimensions: Length = 60, Ø = 20 mm.
€8,20 €6,78
GRANIT Bowden cable drawbar / drawbar 1840 mm Fiat
GRANIT
Length: 1840 mm. More
Length: 1840 mm.
€80,67 €66,67 €72,95 €60,29
You save 10%
GRANIT Lock pin 16 x 70 mm galvanized
GRANIT
A: 16 mm. B: 70 mm. C: 35 mm. Version: galvanised. More
A: 16 mm. B: 70 mm. C: 35 mm. Version: galvanised.
€8,95 €7,40
GRANIT Contact switch hand brake control, 2 blade connections
GRANIT
Version: 2 blade terminals. More
Version: 2 blade terminals.
€43,37 €35,84 €39,20 €32,40
You save 10%
Cobo Multifunction switch horn, lighting, indicators
Cobo
Version: For horn, lighting, indicators. More
Version: For horn, lighting, indicators.
€180,89 €149,50 €171,80 €141,98
You save 5%
GRANIT Clutch cable PTO clutch 1150 mm, sleeve 920 mm, M6 Fiat
GRANIT
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 80-90, 85-90, 60-94, 65-94, 72-94, 82-94, 88-94 More
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90...
€37,00 €30,58
GRANIT Thrust bearing single PTO clutch 70 x 110 x 20 mm
GRANIT
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€34,61 €28,60 €32,85 €27,15
You save 5%
GRANIT Thrust bearing driving clutch single 50 x 80/89 x 22 mm
GRANIT
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€48,82 €40,35 €46,35 €38,31
You save 5%
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€32,25 €26,65
KS Piston ring set 3 rings, Ø 104 mm Fiat 60-46 - 115-90, L 60, L 75
KS
Dimensions: 3 rings, Ø 104 mm, 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 104 mm, 2.5 mm / 2.5 mm / 4 mm.
€120,88 €99,90 €114,80 €94,88
You save 5%
KS Piston set complete Ø 104 mm, combustion chamber Ø 52,2 mm Fiat
KS
Dimensions: 3 rings, Ø 104 mm, gudgeon pin Ø 38 x 85 mm, combustion chamber Ø 52.2 mm, combustion chamber depth 22.5 mm, ring carrier piston, dry l... More
Dimensions: 3 rings, Ø 104 mm, gudgeon pin Ø 38 x 85 mm, combustion ...
€482,41 €398,69 €458,25 €378,72
You save 5%
Door lock, right Fiat 15843, Series 88
€96,88 €80,07 €92,00 €76,03
You save 5%
Showing 193 - 216 of 225

Fiat 60-88 parts for a tractor that is still worth keeping

The 60-88 from Fiat's 88 series is still a common sight on mixed farms and in collectors' sheds. For this model we carry more than 200 replacement parts from GRANIT, Cobo, LUK, Bosch/Rexroth and Eaton.

Hydraulics and linkage

For the hydraulics there are hydraulic pumps and seals, such as the lift shaft seal. A practical point with the pump: check the rotation and the shaft type of the pump you take off. A pump with the wrong rotation or a different taper may bolt to the flange but will not deliver oil. Prime the new pump with clean oil through the port before starting, so it does not run dry.

Cooling and engine

On the engine side you will find thermostats with matching O-rings, gaskets such as the rear engine cover gasket, and an exhaust tube. Always renew the O-ring with a new thermostat. An old ring that has sat in coolant for years is usually distorted and tends to leak the first time the engine warms up.

Clutch, steering and electrics

For the clutch there are clutch kits and thrust bearings, including a release bearing for the main clutch. On the steering side there are ball joints.

The electrics cover alternators, rocker switches, indicator and position lights and lamp glasses. If only the lens of an indicator is broken, just the glass needs replacing. There are also holders and an air suspended tractor seat.

An exhaust tube on an older tractor often rusts from the inside, from condensation that never burns off on short runs. If you see rust holes along the seams, replace the tube before it snaps and secure it with new clamps. Ball joints can be replaced one at a time, but the toe-in has to be reset afterwards. Measure the length of the old track rod before you undo it and you will be close to the right setting straight after fitting.

The Fiat 60-88 and its stablemates

The 88 series includes several models with different numbers, so check the type plate to confirm your tractor really is a 60-88 and note the chassis number. If the old part is still in the workshop, look for a stamped number. On hydraulic pumps and alternators it often sits on a tag on the housing.

From the same series, the Fiat 70-88 has its own page. The Fiat 65-88 belongs to this range too. Every other Fiat tractor is listed by model under Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart