Menu
EUR

Fiat 60-88 tractor parts & technical data

From lighting and electrics to brake and transmission parts, the Fiat 60-88 from the 88 series is covered here with more than 200 matching items.

225 parts found for Fiat 60-88
Show:
GRANIT Connecting rod bearing standard, Ø 63,73 mm
GRANIT
Connecting rod bearing standard, Ø 63,73 mm
Dimensions: Ø 63.73 mm.
€11,70 €9,67
 
Tube exhaust curved vertical enamelled 700 mm Fiat series 46-94
5%
Tube exhaust curved vertical enamelled 700 mm Fiat series 46-94
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700 mm.
€47,88 €39,57 €45,45 €37,56
 
GRANIT Piston ring set Ø 104 mm, 2,5 mm / 2,5 mm / 4 mm Fiat
GRANIT
Piston ring set Ø 104 mm, 2,5 mm / 2,5 mm / 4 mm Fiat
Dimensions: 3 rings, Ø 104 mm, 2.5 mm / 2.5 mm / 4 mm.
€36,85 €30,45
 
GRANIT Piston set, complete Ø 104 mm, chamber Ø 52,3 x 22,5 mm Fiat
5%
GRANIT
Piston set, complete Ø 104 mm, chamber Ø 52,3 x 22,5 mm Fiat
Dimensions: 3 rings, Ø 104 mm, Gudgeon pin Ø 38 x 85 mm, Combustion chamber Ø 52...
€204,89 €169,33 €194,60 €160,83
 
GRANIT Gasket rear cover engine 8035.05-8045.06
GRANIT
Gasket rear cover engine 8035.05-8045.06
€9,00 €7,44
 
GRANIT Oil sump gasket set 3-cylinder Fiat
GRANIT
Oil sump gasket set 3-cylinder Fiat
€17,80 €14,71
 
GRANIT Seal rear cover engine Fiat
GRANIT
Seal rear cover engine Fiat
€2,64 €2,18
 
Hydraulic pump single 16 cm³/rpm. anticlockwise, taper 1:8
5%
Hydraulic pump single 16 cm³/rpm. anticlockwise, taper 1:8
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 48,1 mm. B: 108,2 ...
€150,96 €124,76 €143,40 €118,51
 
Bosch/Rexroth Hydraulic pump 14 cm³/rpm., taper 1:8, Ø 17,46, 7/16-20 UNF, left Fiat
5%
Bosch/Rexroth
Hydraulic pump 14 cm³/rpm., taper 1:8, Ø 17,46, 7/16-20 UNF, left Fiat
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: Anticlockwi...
€490,49 €405,36 €465,95 €385,08
 
GRANIT Pin Ø 20 mm, length 60 mm Fiat
GRANIT
Pin Ø 20 mm, length 60 mm Fiat
Dimensions: Length = 60, Ø = 20 mm.
€8,20 €6,78
 
GRANIT Bowden cable drawbar / drawbar 1840 mm Fiat
10%
GRANIT
Bowden cable drawbar / drawbar 1840 mm Fiat
Length: 1840 mm.
€80,67 €66,67 €72,95 €60,29
 
GRANIT Lock pin 16 x 70 mm galvanized
GRANIT
Lock pin 16 x 70 mm galvanized
A: 16 mm. B: 70 mm. C: 35 mm. Version: galvanised.
€8,95 €7,40
 
GRANIT Contact switch hand brake control, 2 blade connections
10%
GRANIT
Contact switch hand brake control, 2 blade connections
Version: 2 blade terminals.
€43,37 €35,84 €39,20 €32,40
 
Cobo Multifunction switch horn, lighting, indicators
5%
Cobo
Multifunction switch horn, lighting, indicators
Version: For horn, lighting, indicators.
€180,89 €149,50 €171,80 €141,98
 
GRANIT Clutch cable PTO clutch 1150 mm, sleeve 920 mm, M6 Fiat
GRANIT
Clutch cable PTO clutch 1150 mm, sleeve 920 mm, M6 Fiat
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 8...
€37,00 €30,58
 
GRANIT Thrust bearing single PTO clutch 70 x 110 x 20 mm
5%
GRANIT
Thrust bearing single PTO clutch 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20
€34,61 €28,60 €32,85 €27,15
 
GRANIT Thrust bearing driving clutch single 50 x 80/89 x 22 mm
5%
GRANIT
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22
€48,82 €40,35 €46,35 €38,31
 
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Secondary filter main insert C14101, C14202/1, C14210/2
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 m...
€32,25 €26,65
 
KS Piston ring set 3 rings, Ø 104 mm Fiat 60-46 - 115-90, L 60, L 75
5%
KS
Piston ring set 3 rings, Ø 104 mm Fiat 60-46 - 115-90, L 60, L 75
Dimensions: 3 rings, Ø 104 mm, 2.5 mm / 2.5 mm / 4 mm.
€120,88 €99,90 €114,80 €94,88
 
KS Piston set complete Ø 104 mm, combustion chamber Ø 52,2 mm Fiat
5%
KS
Piston set complete Ø 104 mm, combustion chamber Ø 52,2 mm Fiat
Dimensions: 3 rings, Ø 104 mm, gudgeon pin Ø 38 x 85 mm, combustion chamber Ø 52...
€482,41 €398,69 €458,25 €378,72
 
Door lock, right Fiat 15843, Series 88
5%
Door lock, right Fiat 15843, Series 88
€96,88 €80,07 €92,00 €76,03
 
Showing 193 - 216 of 225

Fiat 60-88 parts for a tractor that is still worth keeping

The 60-88 from Fiat's 88 series is still a common sight on mixed farms and in collectors' sheds. For this model we carry more than 200 replacement parts from GRANIT, Cobo, LUK, Bosch/Rexroth and Eaton.

Hydraulics and linkage

For the hydraulics there are hydraulic pumps and seals, such as the lift shaft seal. A practical point with the pump: check the rotation and the shaft type of the pump you take off. A pump with the wrong rotation or a different taper may bolt to the flange but will not deliver oil. Prime the new pump with clean oil through the port before starting, so it does not run dry.

Cooling and engine

On the engine side you will find thermostats with matching O-rings, gaskets such as the rear engine cover gasket, and an exhaust tube. Always renew the O-ring with a new thermostat. An old ring that has sat in coolant for years is usually distorted and tends to leak the first time the engine warms up.

Clutch, steering and electrics

For the clutch there are clutch kits and thrust bearings, including a release bearing for the main clutch. On the steering side there are ball joints.

The electrics cover alternators, rocker switches, indicator and position lights and lamp glasses. If only the lens of an indicator is broken, just the glass needs replacing. There are also holders and an air suspended tractor seat.

An exhaust tube on an older tractor often rusts from the inside, from condensation that never burns off on short runs. If you see rust holes along the seams, replace the tube before it snaps and secure it with new clamps. Ball joints can be replaced one at a time, but the toe-in has to be reset afterwards. Measure the length of the old track rod before you undo it and you will be close to the right setting straight after fitting.

The Fiat 60-88 and its stablemates

The 88 series includes several models with different numbers, so check the type plate to confirm your tractor really is a 60-88 and note the chassis number. If the old part is still in the workshop, look for a stamped number. On hydraulic pumps and alternators it often sits on a tag on the housing.

From the same series, the Fiat 70-88 has its own page. The Fiat 65-88 belongs to this range too. Every other Fiat tractor is listed by model under Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart