Menu
EUR

Fiat 65-88 tractor parts & technical data

Sorting through parts for a Fiat 65-88? This 88 series tractor has more than 200 of them on this page, such as lighting, electrics and trailer couplings.

240 parts found for Fiat 65-88
Show:
Bosch/Rexroth Hydraulic pump 14 cm³/rpm., taper 1:8, Ø 17,46, 7/16-20 UNF, left Fiat
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: Anticlockwise. Output volume: 14 cc/rev. Line connection suction side: Ø 40mm, ... More
Drive shaft: Taper 1:8, Ø 17.46- 7/16-20 UNF. Direction of rotation: ...
€490,49 €405,36 €465,95 €385,08
You save 5%
GRANIT Pin Ø 20 mm, length 60 mm Fiat
GRANIT
Dimensions: Length = 60, Ø = 20 mm. More
Dimensions: Length = 60, Ø = 20 mm.
€8,20 €6,78
GRANIT Bowden cable drawbar / drawbar 1840 mm Fiat
GRANIT
Length: 1840 mm. More
Length: 1840 mm.
€80,67 €66,67 €72,95 €60,29
You save 10%
GRANIT Lock pin 16 x 70 mm galvanized
GRANIT
A: 16 mm. B: 70 mm. C: 35 mm. Version: galvanised. More
A: 16 mm. B: 70 mm. C: 35 mm. Version: galvanised.
€8,95 €7,40
GRANIT Contact switch hand brake control, 2 blade connections
GRANIT
Version: 2 blade terminals. More
Version: 2 blade terminals.
€43,37 €35,84 €39,20 €32,40
You save 10%
Cobo Multifunction switch horn, lighting, indicators
Cobo
Version: For horn, lighting, indicators. More
Version: For horn, lighting, indicators.
€180,89 €149,50 €171,80 €141,98
You save 5%
GRANIT Clutch cable PTO clutch 1150 mm, sleeve 920 mm, M6 Fiat
GRANIT
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 80-90, 85-90, 60-94, 65-94, 72-94, 82-94, 88-94 More
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90...
€37,00 €30,58
GRANIT Thrust bearing single PTO clutch 70 x 110 x 20 mm
GRANIT
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€34,61 €28,60 €32,85 €27,15
You save 5%
GRANIT Thrust bearing driving clutch single 50 x 80/89 x 22 mm
GRANIT
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€48,82 €40,35 €46,35 €38,31
You save 5%
Elring Cylinder head gasket 1,43 mm engine 8045
€79,74 €65,90 €75,75 €62,60
You save 5%
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm engine 8045
€70,20 €58,02 €66,65 €55,08
You save 5%
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€32,25 €26,65
Door lock, right Fiat 15843, Series 88
€96,88 €80,07 €92,00 €76,03
You save 5%
GRANIT Lift rod Ø 22 mm, yoke 37 mm, M27 Fiat
GRANIT
Dimensions: Thread = M27, Clevis width = 37, Bore Ø = 22 mm. More
Dimensions: Thread = M27, Clevis width = 37, Bore Ø = 22 mm.
€102,04 €84,33 €96,90 €80,08
You save 5%
Cobo Indicator/position light 169 x 62 x 90 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 mm. Form: Rectangular. Height: 62 mm. Dimensions W x H x D: 169 x 62 x 90 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 ...
€50,33 €41,60 €45,50 €37,60
You save 10%
GRANIT Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
GRANIT
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional information: Unheated | Installation location: Right/left | To fit: Case... More
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Add...
€482,81 €399,02 €458,65 €379,05
You save 5%
Hydraulics- / getriebeöl filters W1150/2, HF7569
€68,11 €56,29 €30,91 €25,55
You save 55%
GRANIT O-ring 25 x 3,53 mm Ford, Case IH, Fiat, New Holland
GRANIT
Dimensions: 25 x 3.53 mm. More
Dimensions: 25 x 3.53 mm.
€1,81 €1,50
Door cable Fiat Series 88
GRANIT Radiator hose, top inner-Ø 44 mm Fiat 55-88 - 80-88, 60-94 - 88-94
€41,76 €34,51 €39,65 €32,77
You save 5%
GRANIT Handle left Fiat 15845, Series 88
GRANIT
Installation location: links. More
Installation location: links.
€91,31 €75,46 €86,70 €71,65
You save 5%
Showing 217 - 240 of 240

Fiat 65-88 parts to keep a classic working

The Fiat 65-88 has plenty of life left in it if the wear items are dealt with in time. More than 200 parts on this page fit this tractor. They are new replacement parts from GRANIT and from manufacturers including Cobo, LUK, MAHLE and Walterscheid.

Electrics and lighting

If the battery is not charging, an alternator is the likely candidate. For starting there are gear reduction starters, which turn the engine over with less current draw than an older direct drive unit. Inside the cab, worn rocker switches are a simple swap. On the lighting side, an indicator or position light often only has a cracked or faded lens while the housing and bulb holder are still sound. In that case a separate lamp glass is all you need, and the complete light for left or right is there when the housing itself has given up.

Cooling, hydraulics and steering

  • Thermostats with matching O-rings, plus gaskets for the water pump and oil sump
  • Hydraulic pumps and lifting shaft seals
  • Ball joints for the steering linkage
  • Thrust bearings for the driving clutch
  • Exhaust tubes, drawbars and an air suspended tractor seat

Pump rotation matters

Before ordering a hydraulic pump, check the direction of rotation and the drive. A pump turning the wrong way will not deliver oil and can be damaged quickly. The rotation is stated for every pump, so compare it with the unit you are taking off.

Before you replace the alternator

Measure the charging voltage with the engine running and check the earth strap first. A poor earth connection on an older tractor gives exactly the same symptoms as a failed regulator, and costs a lot less to fix. If the alternator really is at fault, compare the pulley and mounting flange of the old unit with the new one before fitting.

Identifying your 65-88 parts

The type plate tells you which model you have. On a tractor of this age some parts may already have been swapped for different ones over the years, so the number on the old part is a more dependable guide than memory. Hold it against the references listed with each product. For shaft seals, measuring inner diameter, outer diameter and thickness is a sure way to get the right one.

Other models in the 88 series

If you also look after a Fiat 60-88 or a Fiat 70-88, each has its own page listing what fits that model. For everything from this make, go to Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart