Menu
EUR

Fiat 65-88 tractor parts & technical data

Sorting through parts for a Fiat 65-88? This 88 series tractor has more than 200 of them on this page, such as lighting, electrics and trailer couplings.

240 parts found for Fiat 65-88
Show:
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., taper 1:8, Ø 17,46 mm, clockwise
Bosch/Rexroth
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Bosch no.: 0510525046. More
Output volume: 11 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€440,02 €363,65 €418,00 €345,45
You save 5%
GRANIT Gas strut rear window 130 N, 500 mm, stroke 205 mm Fiat, Renault
GRANIT
suitable for: Heckscheibe. Newtons: 130. A: 500 mm. B: 255 mm. C: 8 mm. D: 8 mm. Form: 1. d1: 8 mm. d2: 18 mm. Stroke: 205 mm. To fit: Rear screen. More
suitable for: Heckscheibe. Newtons: 130. A: 500 mm. B: 255 mm. C: 8 mm...
€50,28 €41,55 €47,75 €39,46
You save 5%
Signal transmitter temperature thread M16
Version: Temperature, thread: M16. More
Version: Temperature, thread: M16.
€22,80 €18,84
Cobo Fuse box 12-pin blade fuse connection, 174 x 50 x 34,5 mm
Cobo
Version: Without fuses, blade terminal connection at the bottom, transparent cover, L 174 x W 50 x H 34.5 mm. To fit: Blade terminal. Number of pins: ... More
Version: Without fuses, blade terminal connection at the bottom, trans...
€90,71 €74,97 €82,00 €67,77
You save 10%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,98 €40,48 €44,30 €36,61
You save 10%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€84,70 €70,00 €72,85 €60,21
You save 14%
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€120,88 €99,90 €114,80 €94,88
You save 5%
MAHLE Alternator 14 V, 45 A, pulley Ø 90 mm, flange 70 mm
MAHLE
Nominal voltage (V): 14 | Mounting L / d / R (mm): 70,0 / 12,2 / 85,0 | Belt width (mm) / type: 9,7 | Direction of rotation: ↻ | Nominal values (V /... More
Nominal voltage (V): 14 | Mounting L / d / R (mm): 70,0 / 12,2 / 85,0 ...
€266,89 €220,57 €166,75 €137,81
You save 38%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, flange 30 mm
€572,32 €472,99 €357,65 €295,58
You save 38%
Seal brake piston inner Ø 210,8 x 3,4 mm
Dimensions: Ø 210.8 x 3.4 mm. More
Dimensions: Ø 210.8 x 3.4 mm.
€23,65 €19,55
Radiator cap grommet-Ø 57 mm, height 25 mm, for expansion tank
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm. More
Version: For expansion tank. Neck Ø: 57 mm. Height: 25 mm.
€15,30 €12,64
Radiator with cap Case IH, Fiat
To fit as: Fiat Series 46: 55-46–65-46; Series 56: 55-56–70-56; Series 66: 55-66–80-66 S; Series 88: 55-88–70-88; Series 93: 60-93–72-93; Se... More
To fit as: Fiat Series 46: 55-46–65-46; Series 56: 55-56–70-56; Se...
€480,22 €396,88 €456,20 €377,02
You save 5%
GRANIT Connecting rod bearing standard, Ø 63,73 mm
GRANIT
Dimensions: Ø 63.73 mm. More
Dimensions: Ø 63.73 mm.
€11,70 €9,67
Tube exhaust curved vertical enamelled 700 mm Fiat series 46-94
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700 mm. More
Version: Length: 700 mm, Inner Ø: 49 mm. Inner Ø: 49 mm. Length: 700...
€47,88 €39,57 €45,45 €37,56
You save 5%
GRANIT Cylinder head gasket set upper engine 8045.02, 8045.06 Fiat
€86,77 €71,71 €82,40 €68,10
You save 5%
GRANIT Seal rear cover engine Fiat
Hydraulic pump single 16 cm³/rpm. anticlockwise, taper 1:8
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 48,1 mm. B: 108,2 mm. Direction of rotation: Anticlockwise. Line connection suction sid... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 48,1 mm...
€150,96 €124,76 €143,40 €118,51
You save 5%
Showing 193 - 216 of 240

Fiat 65-88 parts to keep a classic working

The Fiat 65-88 has plenty of life left in it if the wear items are dealt with in time. More than 200 parts on this page fit this tractor. They are new replacement parts from GRANIT and from manufacturers including Cobo, LUK, MAHLE and Walterscheid.

Electrics and lighting

If the battery is not charging, an alternator is the likely candidate. For starting there are gear reduction starters, which turn the engine over with less current draw than an older direct drive unit. Inside the cab, worn rocker switches are a simple swap. On the lighting side, an indicator or position light often only has a cracked or faded lens while the housing and bulb holder are still sound. In that case a separate lamp glass is all you need, and the complete light for left or right is there when the housing itself has given up.

Cooling, hydraulics and steering

  • Thermostats with matching O-rings, plus gaskets for the water pump and oil sump
  • Hydraulic pumps and lifting shaft seals
  • Ball joints for the steering linkage
  • Thrust bearings for the driving clutch
  • Exhaust tubes, drawbars and an air suspended tractor seat

Pump rotation matters

Before ordering a hydraulic pump, check the direction of rotation and the drive. A pump turning the wrong way will not deliver oil and can be damaged quickly. The rotation is stated for every pump, so compare it with the unit you are taking off.

Before you replace the alternator

Measure the charging voltage with the engine running and check the earth strap first. A poor earth connection on an older tractor gives exactly the same symptoms as a failed regulator, and costs a lot less to fix. If the alternator really is at fault, compare the pulley and mounting flange of the old unit with the new one before fitting.

Identifying your 65-88 parts

The type plate tells you which model you have. On a tractor of this age some parts may already have been swapped for different ones over the years, so the number on the old part is a more dependable guide than memory. Hold it against the references listed with each product. For shaft seals, measuring inner diameter, outer diameter and thickness is a sure way to get the right one.

Other models in the 88 series

If you also look after a Fiat 60-88 or a Fiat 70-88, each has its own page listing what fits that model. For everything from this make, go to Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart