Menu
EUR

Fiat 72-94 tractor parts & technical data

Sorted by model: more than 250 parts that fit the Fiat 72-94 from the 94 series, including lighting, electrics and trailer couplings for this tractor.

264 parts found for Fiat 72-94
Show:
GRANIT Contact switch hand brake control, 2 blade connections
GRANIT
Version: 2 blade terminals. More
Version: 2 blade terminals.
€43,37 €35,84 €39,20 €32,40
You save 10%
GRANIT Cover for switch cut-off / controls
GRANIT
Version: For switch cut-out (fittings). More
Version: For switch cut-out (fittings).
€17,60 €14,55
GRANIT Clutch cable PTO clutch 1150 mm, sleeve 920 mm, M6 Fiat
GRANIT
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 80-90, 85-90, 60-94, 65-94, 72-94, 82-94, 88-94 More
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90...
€37,00 €30,58
GRANIT Repair set clutch cylinder Fiat, Ford, McCormick, New Holland
€49,25 €40,70 €46,75 €38,64
You save 5%
SANDEN Aircon compressor 12 V, Ø 132 mm, 2 grooves, 175 ccm
SANDEN
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP 20 | Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 175 More
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: S...
€529,98 €438,00 €503,45 €416,07
You save 5%
GRANIT Thrust bearing single PTO clutch 70 x 110 x 20 mm
GRANIT
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€34,61 €28,60 €32,85 €27,15
You save 5%
GRANIT Thrust bearing driving clutch single 50 x 80/89 x 22 mm
GRANIT
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€48,82 €40,35 €46,35 €38,31
You save 5%
Elring Cylinder head gasket 1,43 mm engine 8045
€79,74 €65,90 €75,75 €62,60
You save 5%
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm engine 8045
€70,20 €58,02 €66,65 €55,08
You save 5%
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€32,25 €26,65
GRANIT V-belt alternator Fendt, Fiat, Case IH, Ford, New Holland
GRANIT
Version: Alternator. More
Version: Alternator.
€8,70 €7,19
GRANIT Hand throttle cable A 1170 mm, B 945 mm Fiat
GRANIT
A: 1170 mm. B: 945 mm. More
A: 1170 mm. B: 945 mm.
€30,55 €25,25
GRANIT Lift rod Ø 22 mm, yoke 37 mm, M27 Fiat
GRANIT
Dimensions: Thread = M27, Clevis width = 37, Bore Ø = 22 mm. More
Dimensions: Thread = M27, Clevis width = 37, Bore Ø = 22 mm.
€102,04 €84,33 €96,90 €80,08
You save 5%
Cobo Headlight left / right 12V45/40WAS / R2, built-in, screw fixing
Cobo
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Left/right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped be... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation locati...
€110,53 €91,35 €100,00 €82,64
You save 10%
GRANIT Mirror 236 x 180 mm unheated, rod-Ø 16 - 20 mm - 25 pieces
GRANIT
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Additional information: Unheated | Installation location: Right/left | To fit: Case... More
Rod Ø (mm): 16 - 20 | Width (mm): 180 | Notes: Manual operation | Add...
€482,81 €399,02 €458,65 €379,05
You save 5%
Hydraulics- / getriebeöl filters W1150/2, HF7569
€68,11 €56,29 €30,91 €25,55
You save 55%
GRANIT O-ring 25 x 3,53 mm Ford, Case IH, Fiat, New Holland
GRANIT
Dimensions: 25 x 3.53 mm. More
Dimensions: 25 x 3.53 mm.
€1,81 €1,50
GRANIT Bolt set 2de steering valve M10 x 160 Fiat, Ford, New Holland
GRANIT
Technical data: M10 x 160. Description: For 2nd Control unit. More
Technical data: M10 x 160. Description: For 2nd Control unit.
€34,78 €28,74 €33,00 €27,27
You save 5%
Ball joint ball-Ø 19 mm Case IH, Fiat, New Holland
Dimensions: Ball Ø = 19 mm. More
Dimensions: Ball Ø = 19 mm.
€47,82 €39,52 €45,40 €37,52
You save 5%
GRANIT Yoke 410 mm, M27, clevis width 23 mm Fiat
GRANIT
Dimensions: Length = 410, Thread = M27, Clevis width = 23 mm. More
Dimensions: Length = 410, Thread = M27, Clevis width = 23 mm.
€112,99 €93,38 €107,30 €88,68
You save 5%
Aircon compressor 12 V, Ø 134 mm, 2 grooves, 135 ccm
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil quantity (ccm): 135 | Nominal voltage (V): 12 | Refrigerant: R 134a | Fixing: EM More
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil q...
€492,71 €407,20 €468,00 €386,78
You save 5%
Showing 241 - 264 of 264

Fiat 72-94 parts for the linkage, belt drive and clutch

On a Fiat 72-94 with plenty of seasons behind it, the linkage, the belts and the clutch tend to be the first things asking for attention. For this model from the Fiat 94 Series there are more than 250 replacement parts on this page, made by GRANIT, Cobo, MAHLE, LUK and Eaton among others.

Getting the linkage tight again

For the three point linkage there are lift rods, such as the upper part of the lifting strut, and seals for the lift shaft. A leaking lift shaft shows up as oil on the outside of the lift housing, usually mixed with dust into a dark crust. When you replace that seal, check the running surface of the shaft. A worn groove will make even a new seal weep again. Piston sealing rings are here as well.

Engine, belts and electrics

Engine parts include V-belts, gaskets such as the one for the oil sump, thermostat O-rings and alternators. For hard starting there is a gear reduction starter, which puts more torque on the ring gear while drawing less current.

A practical tip: fit a new V-belt whenever you fit a new alternator, and tension it properly. An old, stretched belt slips on the pulley, the alternator undercharges and the belt wears even faster. Check the tension again after a few hours of running, since a new belt always beds in a little.

In the cab, an air conditioning compressor from this range gets the cooling going again, and for the driver there are air suspended tractor seats.

Clutch and drawbar

On the clutch side there are clutch kits, double clutches and thrust bearings, plus gear wheels for the drive. A double clutch handles both the driving clutch and the PTO, so if you are unsure which one is slipping, it pays to look at the whole assembly. At the rear, a drawbar from this range fits the tractor.

Picking the right part for a 72-94

The rating plate tells you if you have a 72-94 or another model from the 94 Series. That matters, because each model has a page of its own. If you are unsure about a gasket or seal, use the number on the old part to compare it with the parts on this page.

The other 94 Series models each have their own overview. If you run one of them next to the 72-94, find its parts there:

Older Fiats and the other series are covered on Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart