Menu
EUR

Fiat 72-94 tractor parts & technical data

Sorted by model: more than 250 parts that fit the Fiat 72-94 from the 94 series, including lighting, electrics and trailer couplings for this tractor.

264 parts found for Fiat 72-94
Show:
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€630,00 €520,66 €590,60 €488,10
You save 6%
GRANIT Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
GRANIT
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€51,53 €42,59 €48,95 €40,45
You save 5%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€105,50 €87,19 €100,20 €82,81
You save 5%
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€39,15 €32,36
GRANIT Cylinder head gasket 1,43 mm Case IH, Fiat, New Holland
GRANIT
Thickness: 1,43 mm. More
Thickness: 1,43 mm.
€36,15 €29,88
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
You save 46%
GRANIT Radiator hose, bottom inner-Ø 35 mm, length 80 mm
GRANIT
Inner Ø: 35 mm. Length: 80 mm. More
Inner Ø: 35 mm. Length: 80 mm.
€4,84 €4,00
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
You save 21%
Start safety switch make contact M14 x 1,5
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug connector. More
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug c...
€25,70 €21,24
Alternator 14 V / 65 A, form A, flange 70,0 mm, pulley-Ø 90,0 mm
To fit as: Case IH, Fiat, Laverda, New Holland More
To fit as: Case IH, Fiat, Laverda, New Holland
€297,94 €246,23 €269,55 €222,77
You save 10%
HELLA Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
HELLA
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14 | Additional information: With pulley | Pulley Ø (mm): 93 | Nominal values (V ... More
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14...
€292,84 €242,02 €235,40 €194,55
You save 20%
LUK Clutch kit double plate connection without release bearing, 30,60 kg
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228007717, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€808,50 €668,18 €768,00 €634,71
You save 5%
Alternator 14 V / 55 A, pulley-Ø 82 mm, flange 72 mm
Additional information: Connections: B+ (M6), D+ (M5) | Installation angle (°): 0 | Flange size (mm): 72,0 | Belt width (mm) / type: 9,7 | Pulley spa... More
Additional information: Connections: B+ (M6), D+ (M5) | Installation a...
€173,96 €143,77 €165,25 €136,57
You save 5%
GRANIT Bush 10 teeth Fiat Series 46 - 94, L 60-95, New Holland TN95
€42,65 €35,25 €40,50 €33,47
You save 5%
GRANIT Tank cap tank collar Ø 60 mm, thread Ø 58 / 60 mm
GRANIT
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm. More
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm.
€31,20 €25,79
GRAMMER Tractor seat Maximo Basic MSG85/721
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 480 mm. Joystick console: Optional. S... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.305,84 €1.079,21 €1.240,50 €1.025,21
You save 5%
GRANIT Spacer spring
GRANIT
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66, 50-66, 50-66S, 55-66, 55-66F, 55-66S, 56-66S, 60-66, 60-66S, 60-66F, 65-66, 65... More
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66...
€23,75 €19,63
GRANIT Holder left Fiat Series 66-94
€55,44 €45,82 €52,65 €43,51
You save 5%
GRANIT Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
GRANIT
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade terminal 6.3 mm, Colour: white. To fit: BMW, Mercedes-Benz. More
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade t...
€25,60 €21,16
Showing 25 - 48 of 264

Fiat 72-94 parts for the linkage, belt drive and clutch

On a Fiat 72-94 with plenty of seasons behind it, the linkage, the belts and the clutch tend to be the first things asking for attention. For this model from the Fiat 94 Series there are more than 250 replacement parts on this page, made by GRANIT, Cobo, MAHLE, LUK and Eaton among others.

Getting the linkage tight again

For the three point linkage there are lift rods, such as the upper part of the lifting strut, and seals for the lift shaft. A leaking lift shaft shows up as oil on the outside of the lift housing, usually mixed with dust into a dark crust. When you replace that seal, check the running surface of the shaft. A worn groove will make even a new seal weep again. Piston sealing rings are here as well.

Engine, belts and electrics

Engine parts include V-belts, gaskets such as the one for the oil sump, thermostat O-rings and alternators. For hard starting there is a gear reduction starter, which puts more torque on the ring gear while drawing less current.

A practical tip: fit a new V-belt whenever you fit a new alternator, and tension it properly. An old, stretched belt slips on the pulley, the alternator undercharges and the belt wears even faster. Check the tension again after a few hours of running, since a new belt always beds in a little.

In the cab, an air conditioning compressor from this range gets the cooling going again, and for the driver there are air suspended tractor seats.

Clutch and drawbar

On the clutch side there are clutch kits, double clutches and thrust bearings, plus gear wheels for the drive. A double clutch handles both the driving clutch and the PTO, so if you are unsure which one is slipping, it pays to look at the whole assembly. At the rear, a drawbar from this range fits the tractor.

Picking the right part for a 72-94

The rating plate tells you if you have a 72-94 or another model from the 94 Series. That matters, because each model has a page of its own. If you are unsure about a gasket or seal, use the number on the old part to compare it with the parts on this page.

The other 94 Series models each have their own overview. If you run one of them next to the 72-94, find its parts there:

Older Fiats and the other series are covered on Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart