Menu
EUR

Fiat 90-90 tractor parts & technical data

If there is a Fiat 90-90 in your yard, this is your overview: more than 200 parts for the 90 series, including lighting, electrics and trailer couplings.

235 parts found for Fiat 90-90
Show:
Silencer vertical enamelled 820 mm, inner Ø 60 mm Fiat
5%
Silencer vertical enamelled 820 mm, inner Ø 60 mm Fiat
Version: Length: 820 mm, Inner Ø: 60 mm.
€109,47 €90,47 €103,95 €85,91
 
GRANIT Bolt set 3de steering valve M10 x 200 Fiat, New Holland
5%
GRANIT
Bolt set 3de steering valve M10 x 200 Fiat, New Holland
Technical data: M10 x 200.
€50,88 €42,05 €48,30 €39,92
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
Holder right Fiat Series 66-94
10%
Holder right Fiat Series 66-94
€58,21 €48,11 €52,65 €43,51
 
GRANIT Brake light switch oil pressure make contact, neutral position off, M10 x 1
5%
GRANIT
Brake light switch oil pressure make contact, neutral position off, M10 x 1
Version: Thread M10 x 1, normally off, make contact, Blade terminal.
€37,90 €31,32 €36,00 €29,75
 
Cobo Tank sender main tank, stroke 389 mm
10%
Cobo
Tank sender main tank, stroke 389 mm
Version: Main tank, stroke: 389 mm.
€80,45 €66,49 €72,75 €60,12
 
Cobo Indicator/position light 169 x 62 x 90 mm, P21W, R5W left
10%
Cobo
Indicator/position light 169 x 62 x 90 mm, P21W, R5W left
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 mm. Form: ...
€50,33 €41,60 €45,50 €37,60
 
Radiator 665 x 555 mm, Ø 45 / 38 mm Fiat 880-980
5%
Radiator 665 x 555 mm, Ø 45 / 38 mm Fiat 880-980
To fit as: Fiat Serie 80 (780, 880, 980), Serie 90 (55-90, 60-90, 65-90, 70-90, ...
€621,41 €513,56 €590,30 €487,85
 
SACHS Double clutch DuT 310, 40 x 45 mm, 16 splines, sintered Fiat
5%
SACHS
Double clutch DuT 310, 40 x 45 mm, 16 splines, sintered Fiat
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sintered clutch ...
€925,50 €764,88 €879,20 €726,61
 
GRANIT Double clutch 35 x 40 mm, 14 splines Fiat 580 - 780, 640
5%
GRANIT
Double clutch 35 x 40 mm, 14 splines Fiat 580 - 780, 640
Flywheel dimension (mm): 2 (erhöht) | Additional information: Made in Germany | ...
€1.618,98 €1.338,00 €1.538,00 €1.271,07
 
GRANIT Clutch cable driving clutch 480 mm, sleeve length 255 mm, M6 Fiat
GRANIT
Clutch cable driving clutch 480 mm, sleeve length 255 mm, M6 Fiat
Sleeve length (mm): 255 | Cable length (mm): 480 | Thread: M6
€35,20 €29,09
 
LUK Clutch plate 310UKF 24 x 28 mm, 10 splines Fiat
5%
LUK
Clutch plate 310UKF 24 x 28 mm, 10 splines Fiat
Dimensions (mm): 24 x 28 10 grooves
€171,95 €142,11 €163,35 €135,00
 
Pilot bearing 20 x 47 x 14 mm, 106 g
Pilot bearing 20 x 47 x 14 mm, 106 g
Dimensions (mm): 20 x 47 x 14
€9,85 €8,14
 
Heating element Ford, Fiat, New Holland
5%
Heating element Ford, Fiat, New Holland
€309,46 €255,75 €293,95 €242,93
 
Tank cap Fiat series 46-93
Tank cap Fiat series 46-93
€7,55 €6,24
 
Thermostat gasket Fiat 400-1580
Thermostat gasket Fiat 400-1580
€2,74 €2,26
 
GRANIT O-ring 25,07 x 2,62 mm Fiat
GRANIT
O-ring 25,07 x 2,62 mm Fiat
Dimensions: 25.07 x 2.62 mm.
€1,00 €0,83
 
GRANIT Nut cylinder head Ford, Fiat, New Holland
GRANIT
Nut cylinder head Ford, Fiat, New Holland
€17,70 €14,63
 
GRANIT Crankshaft seal Ø 42 x 65 x 12 mm Case IH, Fiat, Steyr, New Holland
GRANIT
Crankshaft seal Ø 42 x 65 x 12 mm Case IH, Fiat, Steyr, New Holland
Outer Ø: 65 mm. Width: 12 mm. Inner Ø: 42 mm.
€5,00 €4,13
 
GRANIT Fuel tank Fiat series 88, 90, 93, 94
5%
GRANIT
Fuel tank Fiat series 88, 90, 93, 94
€642,51 €531,00 €610,35 €504,42
 
Showing 73 - 96 of 235

Fiat 90-90 parts for the linkage, engine and steering

Most Fiat 90-90 tractors have a lot of hours behind them, and it shows in seals, bearings and bushes. More than 200 replacement parts fit this model, from GRANIT and from makers such as Cobo, Walterscheid, Bosch/Rexroth and FLEETGUARD.

Bringing the linkage back to life

If the linkage slowly drops with an implement on, the leak is often in the lift cylinder. There are seals for the outer lift cylinder and piston sealing rings, along with bushes for the lift arm shaft and lift rods. For oil pressure there is a single hydraulic pump from Bosch/Rexroth. Before fitting new seals, inspect the cylinder bore for scoring. A groove in the bore will chew through fresh seals in no time and the job will have been wasted.

Engine, clutch and front axle

For cooling there is a thermostat with its O-ring, plus gaskets for the water pump and the rear engine cover. A FLEETGUARD air filter with a separate inner element keeps the intake clean. The driving clutch can take a new thrust bearing, the steering new ball joints, and the brakes new brake cylinder O-rings. Lamp glasses, holders, yokes and rocker switches complete the list.

A quick note on the inner air filter: replace it rather than blowing it out. It is the last line of defence for the engine if the outer element is ever damaged.

Thrust bearing and clutch

A thrust bearing that sings or rattles as soon as you press the clutch pedal needs replacing. The tractor has to be split to reach it, so inspect the clutch plate and pressure plate on the same job. Reset the pedal play after fitting. With too little play the bearing turns all the time and the new one will soon be worn out too.

Ordering the right part

On an older tractor the type plate can be weathered, so clean it carefully to confirm you have a 90-90. For seals, bushes and bearings, measure the old part and compare the bore, outside size and width with the product details. Filters usually have a clearly printed reference number on the housing.

The rest of the 90 series

The 90 series came in several sizes, and each one has a page here with the parts that fit it:

For the rest of the brand, go to Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart