Menu
EUR

Fiat 90-90 tractor parts & technical data

If there is a Fiat 90-90 in your yard, this is your overview: more than 200 parts for the 90 series, including lighting, electrics and trailer couplings.

235 parts found for Fiat 90-90
Show:
Seal water pump Fiat, Ford
Seal water pump Fiat, Ford
€3,81 €3,15
 
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:8, Ø 17,46 mm, anticlockwise
5%
Bosch/Rexroth
Hydraulic pump 19 cm³/rpm., taper 1:8, Ø 17,46 mm, anticlockwise
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation...
€446,89 €369,33 €424,50 €350,83
 
Bosch/Rexroth Hydraulic pump clockwise rotating with valve 14 cm³/rpm., taper 1:8 Ø 17,46
5%
Bosch/Rexroth
Hydraulic pump clockwise rotating with valve 14 cm³/rpm., taper 1:8 Ø 17,46
Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Output volume: 14...
€891,16 €736,50 €846,60 €699,67
 
GRANIT Lateral strut right and left 318 mm, Ø 30 mm, ball Ø 19 mm Fiat
5%
GRANIT
Lateral strut right and left 318 mm, Ø 30 mm, ball Ø 19 mm Fiat
Ø A: 30 mm. Dimensions: Ball Ø = 19 mm. Length: 318 mm.
€47,32 €39,11 €44,95 €37,15
 
Spindle thread M27 x 3 Fiat
Spindle thread M27 x 3 Fiat
Dimensions: Thread = M27 x 3 mm.
€30,45 €25,17
 
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Bush left lift arm shaft 62,8 x 68,2 x 40 mm Ford, Fiat, New Holland
Dimensions: 62.8 x 68.2 x 40 mm.
€22,00 €18,18
 
GRANIT Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
Dimensions: 98 x 3.6 mm.
€2,86 €2,36
 
Frame hood Fiat series 80, 90, TK
5%
Frame hood Fiat series 80, 90, TK
€245,85 €203,18 €233,55 €193,02
 
AL-KO Chock UK 800 folding, 2.500 kg, tires radius 830 mm
AL-KO
Chock UK 800 folding, 2.500 kg, tires radius 830 mm
Static tyre radius up to max.: 830 mm.
€109,20 €90,25
 
GRANIT Chock folding Fiat, Ford, New Holland
5%
GRANIT
Chock folding Fiat, Ford, New Holland
€162,87 €134,60 €154,70 €127,85
 
GRANIT Oil pressure switch M12 x 1,5, 0,3 - 0,6 bar, blade connection
GRANIT
Oil pressure switch M12 x 1,5, 0,3 - 0,6 bar, blade connection
Version: 0.3 - 0.6 bar, Thread M12 x 1.5, Blade terminal.
€16,70 €13,80
 
Angle drive tractormeter side 2 x M16 x 1
5%
Angle drive tractormeter side 2 x M16 x 1
Version: Thread: 2 x M16 x 1.
€61,42 €50,76 €58,30 €48,18
 
Cobo Rocker switch voorgloeiapparaat, 2 blade connections
Cobo
Rocker switch voorgloeiapparaat, 2 blade connections
Version: 12 V/24 V, Spring-loaded switch, 2 blade terminals, Installation dimens...
€30,90 €25,54
 
Cobo Toggle switch main headlights
5%
Cobo
Toggle switch main headlights
€64,40 €53,22 €61,15 €50,54
 
Cobo Lamp glass right
Cobo
Lamp glass right
Installation location: Right.
€18,60 €15,37
 
Cobo Lamp glass right
Cobo
Lamp glass right
Installation location: Right. Menke no.: 55041.
€18,00 €14,88
 
Cobo Rear light right 169 x 62 x 90 mm, 12 V, hole spacing 132 mm
10%
Cobo
Rear light right 169 x 62 x 90 mm, 12 V, hole spacing 132 mm
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Plug. Width: 169 mm. Form: Recta...
€46,44 €38,38 €42,00 €34,71
 
GRANIT Ball joint taper 20 - 22,2 mm, 95 mm, M24 x 1,5
10%
GRANIT
Ball joint taper 20 - 22,2 mm, 95 mm, M24 x 1,5
Taper (mm): 20 - 22.2. Length (mm): 95. Outer thread (mm): M24 x 1.5.
€54,11 €44,72 €48,95 €40,45
 
Gaiter Fiat L 65-95
Gaiter Fiat L 65-95
To fit as: Fiat 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 8...
€28,85 €23,84
 
FLEETGUARD Secondary air filter AF25558, element AF25557
5%
FLEETGUARD
Secondary air filter AF25558, element AF25557
suitable main element 739AF25557
€36,13 €29,86 €34,30 €28,35
 
Mirror unheated 236 x 180 mm, rod Ø 16 - 20 mm
Mirror unheated 236 x 180 mm, rod Ø 16 - 20 mm
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65-88, 70-88...
€26,45 €21,86
 
GRANIT Double clutch 40 x 45 mm, 16 splines Fiat 880, 980, 90-90 - 110-90
10%
GRANIT
Double clutch 40 x 45 mm, 16 splines Fiat 880, 980, 90-90 - 110-90
Dimensions (mm): 40 x 45, 16 grooves | Additional information: Made in Germany
€980,35 €810,21 €886,95 €733,02
 
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20
€29,15 €24,09
 
Showing 97 - 120 of 235

Fiat 90-90 parts for the linkage, engine and steering

Most Fiat 90-90 tractors have a lot of hours behind them, and it shows in seals, bearings and bushes. More than 200 replacement parts fit this model, from GRANIT and from makers such as Cobo, Walterscheid, Bosch/Rexroth and FLEETGUARD.

Bringing the linkage back to life

If the linkage slowly drops with an implement on, the leak is often in the lift cylinder. There are seals for the outer lift cylinder and piston sealing rings, along with bushes for the lift arm shaft and lift rods. For oil pressure there is a single hydraulic pump from Bosch/Rexroth. Before fitting new seals, inspect the cylinder bore for scoring. A groove in the bore will chew through fresh seals in no time and the job will have been wasted.

Engine, clutch and front axle

For cooling there is a thermostat with its O-ring, plus gaskets for the water pump and the rear engine cover. A FLEETGUARD air filter with a separate inner element keeps the intake clean. The driving clutch can take a new thrust bearing, the steering new ball joints, and the brakes new brake cylinder O-rings. Lamp glasses, holders, yokes and rocker switches complete the list.

A quick note on the inner air filter: replace it rather than blowing it out. It is the last line of defence for the engine if the outer element is ever damaged.

Thrust bearing and clutch

A thrust bearing that sings or rattles as soon as you press the clutch pedal needs replacing. The tractor has to be split to reach it, so inspect the clutch plate and pressure plate on the same job. Reset the pedal play after fitting. With too little play the bearing turns all the time and the new one will soon be worn out too.

Ordering the right part

On an older tractor the type plate can be weathered, so clean it carefully to confirm you have a 90-90. For seals, bushes and bearings, measure the old part and compare the bore, outside size and width with the product details. Filters usually have a clearly printed reference number on the housing.

The rest of the 90 series

The 90 series came in several sizes, and each one has a page here with the parts that fit it:

For the rest of the brand, go to Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart