Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

535 parts found for Fendt Favorit 615 (Typ 385)
Show:
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
€39,01 €32,24
Cooling fan Ø 515 mm Fendt Favorit 611-615
€383,84 €317,22 €353,13 €291,85
You save 8%
Hose thermostat - heating valve Ø 18 mm, length 1700 mm Fendt
Inner Ø: 18 mm. Length: 1700 mm. Material thickness: 3,5 mm. More
Inner Ø: 18 mm. Length: 1700 mm. Material thickness: 3,5 mm.
€47,02 €38,86 €43,26 €35,75
You save 8%
Fan clutch Fendt Favorit 611-615
€318,50 €263,22 €293,02 €242,17
You save 8%
Radiator hose, bottom Ø 44 mm, length 100 mm Fendt
Inner Ø: 44 mm. Length: 100 mm. More
Inner Ø: 44 mm. Length: 100 mm.
€33,84 €27,96
Radiator hose radiator / thermostat inner-Ø 45 mm Fendt
€85,28 €70,48 €78,46 €64,84
You save 8%
Radiator hose thermostat / pressure pipe cylinder head Ø 45 mm Fendt
Thermostat Ø 45/45/25 mm, 75 °C Fendt
Ø: 45/45/25 mm. Temperature: 75 °C. More
Ø: 45/45/25 mm. Temperature: 75 °C.
€291,73 €241,10 €268,39 €221,81
You save 8%
Water pump with gasket Fendt
To fit: Fendt Farmer, Favorit. More
To fit: Fendt Farmer, Favorit.
€161,28 €133,29 €148,38 €122,63
You save 8%
Outlet valve Fendt
€60,40 €49,92 €55,57 €45,92
You save 8%
Main bearing standard Ø 70 mm Fendt, Renault
Dimensions: Ø 70 mm. More
Dimensions: Ø 70 mm.
€35,72 €29,52 €32,86 €27,16
You save 8%
Connecting rod bush Ø 35 mm Fendt
Dimensions: 35 mm. More
Dimensions: 35 mm.
€26,81 €22,16
Crankshaft seal for Ø 78 x 100 x 13 mm Fendt
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595. More
Outer Ø: 100 mm. Width: 13 mm. Inner Ø: 78 mm. Menke no.: 59595.
€31,29 €25,86
Cylinder head bolt 14 x 158 mm Case IH, Steyr, Fendt
Dimensions: M14 x 158 mm. More
Dimensions: M14 x 158 mm.
€35,29 €29,17 €32,47 €26,83
You save 8%
Cover crankshaft rear Fendt
€652,71 €539,43 €600,49 €496,28
You save 8%
Bleed valve Fendt Farmer 102-312, Favorit 509-615, GT 231
€57,92 €47,87 €53,29 €44,04
You save 8%
Oil drain valve thread 1/2 inch - 20UNF Fendt, Massey Ferguson
€68,16 €56,33 €62,71 €51,82
You save 8%
Rocker bracket Fendt
€306,88 €253,62 €282,33 €233,33
You save 8%
Seal kit ZKD 1,75 mm thick Case IH, Renault, Steyr, Fendt
€146,54 €121,11 €134,82 €111,42
You save 8%
Cylinder head gasket set cylinder head gasket 1,4 mm thick Renault, Fendt
Oil pump inlet 34 mm Renault, Fendt
Dimensions: Intake, 34 mm. More
Dimensions: Intake, 34 mm.
€633,74 €523,75 €583,04 €481,85
You save 8%
Piston ring set 3 rings Ø 105 mm, 3 mm trapezoidal ring / 2 mm / 4 mm
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm. More
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€49,72 €41,09 €45,74 €37,80
You save 8%
O-ring thermostat Fendt
Valve stem seal
€3,61 €2,99
O-ring oil pump 25 x 4 mm Fendt
Dimensions: 25 x 4 mm. More
Dimensions: 25 x 4 mm.
€5,29 €4,37
Connecting rod bearing standard, Ø 63 mm
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€36,88 €30,48 €33,93 €28,04
You save 8%
Seal pump cover Fendt
Door lock, right Fendt Farmer 240 S (Typ 294), GT 395
€56,69 €46,85 €52,15 €43,10
You save 8%
Button inserts Fendt Farmer 240 S (Typ 294), GT 395
€35,72 €29,52 €32,86 €27,16
You save 8%
Replacement glass unheated, right / left Fendt
Version: Unheated. Installation location: Right/left. More
Version: Unheated. Installation location: Right/left.
€56,92 €47,04
Replacement glass curved 248 x 139 mm, unheated
Dimensions: 248 x 139 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 248 x 139 mm. Version: Unheated. Installation location: Ri...
€22,73 €18,78
Showing 433 - 480 of 535

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart