Web Analytics
Fendt Favorit 615 (Typ 385) tractor parts & specs
Menu
EUR

Tractor parts Fendt Favorit 615 (Typ 385)

Looking for parts for your Fendt Favorit 615 (Typ 385) tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

395 Products
Show:
Connecting rod bearing Standard, Ø 63 mm
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€32,15 €26,57 €30,54 €25,24
You save 5%
Gasket for exhaust and intake manifold
€5,66 €4,68 €5,38 €4,45
You save 5%
Oil drain valve
Thread: M22 x 1.5. More
Thread: M22 x 1.5.
€11,08 €9,16 €10,53 €8,70
You save 5%
Housing cover crankshaft rear
€608,75 €503,10 €517,44 €427,64
You save 15%
Bleed valve
€53,88 €44,53 €51,19 €42,31
You save 5%
Gasket for crankcase rear
€9,16 €7,57 €8,70 €7,19
You save 5%
Shim M14
€6,66 €5,50 €6,33 €5,23
You save 5%
Sealing ring from silencer
Version: 92 x 107 x 1 mm. More
Version: 92 x 107 x 1 mm.
€18,83 €15,56 €17,89 €14,79
You save 5%
Oil pump
Dimensions: Intake, 34 mm. More
Dimensions: Intake, 34 mm.
€591,07 €488,49 €502,41 €415,21
You save 15%
Injection nozzle
Type formula: DLLA151S985, 0433271782. Bosch no.: 2580433271782. Menke no.: 208221. More
Type formula: DLLA151S985, 0433271782. Bosch no.: 2580433271782. Menke...
€37,39 €30,90 €35,52 €29,36
You save 5%
Valve stem seal
€2,66 €2,20 €2,53 €2,09
You save 5%
Oil sump gasket
€28,11 €23,23 €26,70 €22,07
You save 5%
O-ring
Dimensions: 25 x 4 mm. More
Dimensions: 25 x 4 mm.
€3,93 €3,25 €3,73 €3,08
You save 5%
Connecting rod bearing Standard, Ø 63 mm
Dimensions: Ø 63 mm. More
Dimensions: Ø 63 mm.
€35,34 €29,21 €33,57 €27,74
You save 5%
O-ring for liner, top
€10,41 €8,60 €9,89 €8,17
You save 5%
Return line
€147,10 €121,57 €136,80 €113,06
You save 7%
Bolt set for 4th control unit
Technical data: 3x M8 x 280. More
Technical data: 3x M8 x 280.
€62,53 €51,68 €59,40 €49,09
You save 5%
Cover
€630,11 €520,75 €535,59 €442,64
You save 15%
Gasket for steering pump
€7,50 €6,20 €7,13 €5,89
You save 5%
Bearing block for gas damper attachment on the roof hatch
€48,30 €39,92 €45,89 €37,93
You save 5%
Support
€1,46 €1,21 €1,39 €1,15
You save 5%
Compression spring for rear screen handle
€2,18 €1,80 €2,07 €1,71
You save 5%
Push button insert
€32,84 €27,14 €31,20 €25,79
You save 5%
Bar
€22,99 €19,00 €21,84 €18,05
You save 5%
Showing 193 - 216 of 395

Fendt Favorit 615 (Typ 385) specifications

The Fendt Favorit 615 (Typ 385) is the technical designation for the Favorit 615 LSA series, produced by Fendt in Marktoberdorf. Production ran in various versions from 1983 to 1994, with the early versions carrying the designation T 385.210 (525 units, 1983-1987). Later versions were the LSA Turbo variants, which continued in production until 1994. It is the top model of the Favorit 600 series and was at the time one of the heaviest production tractors in the Fendt range.

Transmission and Turbomatik

A distinctive feature of the 615 LSA is its transmission concept. The tractor uses a helical-toothed ZF synchronised fine-step gearbox, type T 3550, with side-shift in the 40 km/h version. Working in combination with this is the Turbomatik-E, a hydraulic fluid coupling with lock-up clutch. Depending on the load, the lock-up clutch connects the engine and gearbox at between 1,600 and 1,900 rpm, meaning less or no gear changing is required under load. There are four pre-selectable speed ranges with stepless speed control:

  • Range 1: 0-5.2 km/h
  • Range 2: 0-8.2 km/h
  • Range 3: 0-12.8 km/h
  • Range 4: 0-19.4 km/h

Maximum travel speed is 40 km/h.

Engine

The Favorit 615 LSA is fitted with an MWM TD 226-6 (later designated TD226 B6), a water-cooled six-cylinder diesel engine with direct injection, turbocharger and intercooler. Displacement is 6,240 cc. The output of the Turbo version (from 1990, Typ 385) is 136 kW (185 hp). Maximum torque of the later version is 703 Nm at 1,500 rpm. The earlier non-turbo LSA version produced a torque figure of 630 Nm at 1,500 rpm. The engine features an inline injection pump, thermostatically controlled dual-circuit cooling and a dry air filter with pre-cleaner.

Hydraulics and PTO

The power take-off operates at two speeds: 540 and 1,000 rpm. The hydraulic system uses two separate circuits, one supplying the hydrostatic power steering and the other serving the rear and front hydraulics. This dual-circuit hydraulic system was a new feature introduced with the 615 LSA compared to the preceding SL series.

Equipment and options

Standard equipment on the 615 LSA included an enclosed cab, air pressure brakes and hydrostatic power steering. Available options included a front loader, front linkage, front PTO, cab suspension, creep gear, anti-slip control via radar, onboard computer, air conditioning, electrically adjustable door mirrors, an additional 80-litre tank, automatic trailer coupling and electronic external control. The Alltronic option and the Turbomatik-E as a standalone system were also available.

Position within the 600 series

The Favorit 615 is the top model within the Favorit 600 LSA range. The series also included the 611, 612 and 614 models, all sharing the same MWM engine family but with lower power outputs. At 136 kW, the 615 sat in the heaviest class Fendt was producing in series at the time, before the 800 series was introduced in 1993 with MAN engines and higher power outputs.

Brands
  • View more
Locking pin Ø
Guide width
Connecting pin
Hole pattern (mm)
Hole Ø
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart