Menu
EUR

Fiat 65-66 tractor parts & technical data

Lighting, electrics and brake and transmission parts for the Fiat 65-66 are on this page. In total there are more than 200 parts that belong to the 66 series.

214 parts found for Fiat 65-66
Show:
Optibelt V-belt Case IH, Ford, David Brown, New Holland, Fiat
Optibelt
To fit as: Case IH More
To fit as: Case IH
€23,00 €19,01
Danfoss Orbitrol OSPC 100 ON Case IH, Fiat, New Holland
Danfoss
Type: OSPC 100 ON / 150-1151 More
Type: OSPC 100 ON / 150-1151
€1.048,56 €866,58 €996,10 €823,22
You save 5%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€85,00 €70,25 €80,75 €66,74
You save 5%
LUK Double clutch 280/280TGU6 35 x 40 mm, 14 splines, torsie-sprung
LUK
Flywheel dimension (mm): 2 (erhöht) | Material specifications: Organic clutch lining | Dimensions (mm): 35 x 40 14 grooves More
Flywheel dimension (mm): 2 (erhöht) | Material specifications: Organi...
€799,53 €660,77 €759,55 €627,73
You save 5%
GRANIT Clutch plate 280 22 x 25, 10 splines
GRANIT
Additional information: Made in Germany | Dimensions (mm): 22 x 25, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 22 x 25, 10...
€105,06 €86,83 €99,80 €82,48
You save 5%
GRANIT Clutch kit 2 mm raised, Ø 280 mm Fiat 500 - 780
GRANIT
Contents: Double clutch, clutch plate and 2x release bearing | Version: Clutch info: 6-arm clutch DuT 280CERAM sintered (independent engagement) Dimen... More
Contents: Double clutch, clutch plate and 2x release bearing | Version...
€527,06 €435,59 €500,70 €413,80
You save 5%
Alternator 14 V, 33 A, flange 73 mm, pulley Ø 82 mm
Charging current (A): 33 | Pulley spacing (mm): 49,0 | Mounting L / d / R (mm): 73,0 / 10,2 / 80,0 | Nominal values (V / A): 14 / 33 | Belt tension ho... More
Charging current (A): 33 | Pulley spacing (mm): 49,0 | Mounting L / d ...
€139,15 €115,00 €132,15 €109,21
You save 5%
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€288,43 €238,37 €211,40 €174,71
You save 27%
MAHLE Gear reduction starter 12 V, 2,6 kW, 9 teeth, Ø 110 mm, clockwise
€522,12 €431,50 €326,30 €269,67
You save 38%
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€613,17 €506,75 €383,20 €316,69
You save 38%
GRANIT Ball joint 1303 mm, taper 18 - 20,2 mm, M16 x 1,5 / M20 x 1
GRANIT
A: 1303 mm. C: M16 x 1,5 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 1303 mm. C: M16 x 1,5 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Tape...
€164,63 €136,06 €156,35 €129,21
You save 5%
GRANIT Ball joint taper 16,2 - 18,3 mm, 640 mm, M14 x 1,5, 20 mm
GRANIT
A: 640 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 640 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 1...
€43,80 €36,20 €41,60 €34,38
You save 5%
Ball joint 80 mm, M14 x 1,5, M20 x 1, taper 16,2 - 18,3 mm
A: 80 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 80 mm. C: M14 x 1,5 mm. D: M20 x 1 mm. E: 16,2 mm. F: 18,3 mm. Tape...
€36,90 €30,50
GRANIT Brake mechanism foot brake Fiat, Case IH, New Holland
€200,33 €165,56 €190,30 €157,27
You save 5%
GRANIT Flange curved water pump Ford, Fiat
Radiator hose, top inner-Ø 44 mm New Holland, Case IH, Fiat
€19,15 €15,83
GRANIT Plastic fitting Ø 31 mm Ford, Fiat
GRANIT
Dimensions: Ø 31 mm. More
Dimensions: Ø 31 mm.
€24,75 €20,45
Water pump gasket Ford, Fiat
GRANIT O-ring 25,07 x 2,62 mm Fiat
GRANIT
Dimensions: 25.07 x 2.62 mm. More
Dimensions: 25.07 x 2.62 mm.
€1,00 €0,83
GRANIT Gasket set complete engine 8045.02, 8045.06 Fiat
€160,05 €132,27 €152,00 €125,62
You save 5%
Showing 121 - 144 of 214

Fiat 65-66 parts

Plenty of Fiat 65-66 tractors are still doing daily work, and keeping one going comes down to sound maintenance. This page offers more than 200 replacement parts for the 65-66, from a lamp glass to a full clutch kit.

Engine, starting and charging

  • gear reduction starters and alternators
  • thermostats and O-rings
  • gaskets for the water pump and the oil sump
  • V-belts and exhaust tubes
  • tank caps

Swapping an old starter for a gear reduction starter often makes the engine turn over noticeably faster. Check the battery leads and the earth strap to the block while you are at it. On an older tractor these are often corroded, and then even a new starter struggles.

The double clutch

For the clutch there are double clutch pressure plates, clutch kits and thrust bearings, partly from LUK and Eaton. Once a new double clutch is in, the release fingers and the pedal play need setting again. If the fingers are not all at the same height, the PTO will not disengage cleanly and the implement keeps turning when you think it has stopped.

Hydraulics, steering and lights

The page also covers lift shaft seals, brake cylinder O-rings, ball joints for the steering, lamp glasses and push button switches, with Cobo and MAHLE supplying some of them alongside GRANIT. When the lift shaft leaks, replace both seals together and clean the running surface on the shaft well before fitting.

When fitting a new alternator on a tractor of this age, look at the belt and pulley as well. A worn pulley will chew through a new V-belt in no time. Check the thermostat housing for scale and corrosion and always renew the O-ring. A rusted exhaust tube is often heard before it is seen, and the new one should go on with new clamps.

Do not overlook the tank cap. A blocked vent creates a vacuum in the tank and starves the engine during long work, while a leaking cap lets in water and dirt that end up in the fuel filter.

Identifying the right part

On a tractor of this age the identification plate may be hard to read. The serial number is usually still stamped into the block or frame. For clutch parts, the number on the old part gives extra certainty, since the splines have to match exactly.

Other Fiats from the 66 range with their own page:

The rest of the make is under Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart