Menu
EUR

Fiat 88-94 tractor parts & technical data

Running a Fiat 88-94 from the 94 series? This page lists more than 250 parts that fit it, with a wide choice of lighting, electrics and trailer couplings.

260 parts found for Fiat 88-94
Show:
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longit...
€1.245,00 €1.028,93
 
LUK Double clutch 280, 35 x 40, 14 splines sintered Case IH, Fiat
5%
LUK
Double clutch 280, 35 x 40, 14 splines sintered Case IH, Fiat
Dimensions (mm): 35 x 40 14 grooves | Flywheel dimension (mm): 2 (erhöht) | Mate...
€629,05 €519,88 €597,55 €493,84
 
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
49%
FEBI
Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65...
€30,67 €25,35 €15,73 €13,00
 
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
6%
MAHLE
Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€630,00 €520,66 €590,60 €488,10
 
PTO shaft end piece 260 mm Ford, Fiat, New Holland
5%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm.
€105,50 €87,19 €100,20 €82,81
 
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
 
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49...
€39,15 €32,36
 
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€1.333,40 €1.101,98
 
HELLA Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
20%
HELLA
Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14 | Additio...
€292,84 €242,02 €235,40 €194,55
 
LUK Clutch kit double plate connection without release bearing, 30,60 kg
5%
LUK
Clutch kit double plate connection without release bearing, 30,60 kg
Supplementary set: Without release bearing | Connection: For vehicles with doubl...
€808,50 €668,18 €768,00 €634,71
 
Alternator 14 V / 55 A, pulley-Ø 82 mm, flange 72 mm
5%
Alternator 14 V / 55 A, pulley-Ø 82 mm, flange 72 mm
Additional information: Connections: B+ (M6), D+ (M5) | Installation angle (°): ...
€173,96 €143,77 €165,25 €136,57
 
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
46%
FEBI
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
 
GRANIT Fan cowl Mod. 94 Fiat 780-980, 55-90 - 110-90
GRANIT
Fan cowl Mod. 94 Fiat 780-980, 55-90 - 110-90
€114,80 €94,88
 
GRANIT O-ring thermostat Ford, Fiat, New Holland
GRANIT
O-ring thermostat Ford, Fiat, New Holland
€7,45 €6,16
 
GRANIT Radiator hose, bottom inner-Ø 35 mm, length 80 mm
GRANIT
Radiator hose, bottom inner-Ø 35 mm, length 80 mm
Inner Ø: 35 mm. Length: 80 mm.
€4,84 €4,00
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
 
Start safety switch make contact M14 x 1,5
Start safety switch make contact M14 x 1,5
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug connector.
€25,70 €21,24
 
Cobo Lens indicator/position light left / right
Cobo
Lens indicator/position light left / right
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborghini, Landin...
€14,10 €11,65
 
Alternator 14 V / 65 A, form A, flange 70,0 mm, pulley-Ø 90,0 mm
10%
Alternator 14 V / 65 A, form A, flange 70,0 mm, pulley-Ø 90,0 mm
To fit as: Case IH, Fiat, Laverda, New Holland
€297,94 €246,23 €269,55 €222,77
 
GRANIT Bush 10 teeth Fiat Series 46 - 94, L 60-95, New Holland TN95
5%
GRANIT
Bush 10 teeth Fiat Series 46 - 94, L 60-95, New Holland TN95
€42,65 €35,25 €40,50 €33,47
 
GRANIT Spacer spring
GRANIT
Spacer spring
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66, 50-66, 5...
€23,75 €19,63
 
GRANIT Holder left Fiat Series 66-94
5%
GRANIT
Holder left Fiat Series 66-94
€55,44 €45,82 €52,65 €43,51
 
GRANIT Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
GRANIT
Oil pressure switch engine M12 x 1,5, 0,2 - 0,5 bar, blade terminal 6,3 mm
Version: Thread: M12 x 1.5, Switching pressure: 0.2 - 0.5 bar, Blade terminal 6....
€25,60 €21,16
 
Showing 25 - 48 of 260

Fiat 88-94 parts: clutch, cooling and three-point linkage

After many seasons, a Fiat 88-94 tends to bring back the same jobs: an alternator that stops charging, a clutch that starts to slip, a thermostat that sticks. This page holds more than 250 replacement parts for this tractor from makers such as GRANIT, Cobo, MAHLE, LUK and Walterscheid.

Clutch and engine

On the clutch side there are double clutch pressure plates and thrust bearings. With the tractor split anyway, always replace the thrust bearing too, even if it still runs quietly. It is a small part, but if it starts whining later you are back to splitting the tractor. For the engine there are gear reduction starters, alternators, air filters, V-belts and gaskets, including those for the turbocharger at the exhaust manifold and for the water pump. Fit a new O-ring with every new thermostat. An old ring that has been squashed flat will almost always let coolant past once the engine warms up.

Air conditioning, seat and hydraulics

If your 88-94 has a cab with air conditioning, there are aircon compressors for this model. When you replace a compressor, flush the system and fit a new receiver drier, or debris from the failed unit ends up in the new one. Match the compressor oil quantity to the system as well, since too much oil cools poorly and too little wears the new compressor.

The driver gets air-suspended tractor seats. At the rear there are drawbars, lift rods and seals for the lift cylinder, such as the seal for the outer lift cylinder and piston sealing rings. If the linkage slowly drops with a load on it, those piston seals are the first thing to check.

Finding the part that fits

The type plate on the tractor tells you exactly which model you have. Fiat made several tractors in the 94 series that look much alike at first glance. When you remove a part, look for a stamped or printed reference number and compare it with the number shown with the product. With an alternator, check the flange and the pulley. With a V-belt, check the length printed on the back of the old belt.

Each tractor in the 94 series has its own page with the parts that fit that model:

Other Fiat models are on the Fiat parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart