Menu
EUR

Fiat 88-94 tractor parts & technical data

Running a Fiat 88-94 from the 94 series? This page lists more than 250 parts that fit it, with a wide choice of lighting, electrics and trailer couplings.

260 parts found for Fiat 88-94
Show:
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 110 mm, mounting angle l 55
€630,00 €520,66 €590,60 €488,10
You save 6%
GRANIT Ball joint 95 mm, M18 x 1,5, M24 x 1,5, taper 20 - 22,2 mm
GRANIT
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 95 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tape...
€51,53 €42,59 €48,95 €40,45
You save 5%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€105,50 €87,19 €100,20 €82,81
You save 5%
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
Feed pump 2 bores, hole spacing 45 mm, flange 38 mm
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Menke no.: 49521. More
Version: 2 holes, Hole spacing: 45 mm, Flange to lever end: 38 mm. Men...
€39,15 €32,36
PROBOSS Seat PROBOSS AS3510 air suspended, fabric, 510 mm, 12 V
PROBOSS
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 260 mm. Seat width: 510 mm. Joystick console: Optiona... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.333,40 €1.101,98
FEBI Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€278,30 €230,00 €150,06 €124,02
You save 46%
GRANIT Radiator hose, bottom inner-Ø 35 mm, length 80 mm
GRANIT
Inner Ø: 35 mm. Length: 80 mm. More
Inner Ø: 35 mm. Length: 80 mm.
€4,84 €4,00
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
You save 21%
Start safety switch make contact M14 x 1,5
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug connector. More
Version: Make contact, Thread: M14 x 1.5, Connection cable with plug c...
€25,70 €21,24
Cobo Lens indicator/position light left / right
Cobo
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborghini, Landini, Massey Ferguson, Mc Cormick, Renault, Same More
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborgh...
€14,10 €11,65
Alternator 14 V / 65 A, form A, flange 70,0 mm, pulley-Ø 90,0 mm
To fit as: Case IH, Fiat, Laverda, New Holland More
To fit as: Case IH, Fiat, Laverda, New Holland
€297,94 €246,23 €269,55 €222,77
You save 10%
HELLA Alternator 14 V / 45 A, pulley-Ø 93 mm, 1 groove
HELLA
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14 | Additional information: With pulley | Pulley Ø (mm): 93 | Nominal values (V ... More
No. of grooves: 1 | Charging current (A): 45 | Nominal voltage (V): 14...
€292,84 €242,02 €235,40 €194,55
You save 20%
LUK Clutch kit double plate connection without release bearing, 30,60 kg
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228007717, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€808,50 €668,18 €768,00 €634,71
You save 5%
Alternator 14 V / 55 A, pulley-Ø 82 mm, flange 72 mm
Additional information: Connections: B+ (M6), D+ (M5) | Installation angle (°): 0 | Flange size (mm): 72,0 | Belt width (mm) / type: 9,7 | Pulley spa... More
Additional information: Connections: B+ (M6), D+ (M5) | Installation a...
€173,96 €143,77 €165,25 €136,57
You save 5%
GRANIT Bush 10 teeth Fiat Series 46 - 94, L 60-95, New Holland TN95
€42,65 €35,25 €40,50 €33,47
You save 5%
GRANIT Tank cap tank collar Ø 60 mm, thread Ø 58 / 60 mm
GRANIT
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm. More
Thread Ø mm: 58 / 60. Filler neck Ø: 60 mm.
€31,20 €25,79
GRANIT Spacer spring
GRANIT
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66, 50-66, 50-66S, 55-66, 55-66F, 55-66S, 56-66S, 60-66, 60-66S, 60-66F, 65-66, 65... More
Version / types: Fiat: 55-46, 60-46, 65-46, 55-56, 60-56, 70-56, 45-66...
€23,75 €19,63
GRANIT Holder left Fiat Series 66-94
€55,44 €45,82 €52,65 €43,51
You save 5%
Showing 25 - 48 of 260

Fiat 88-94 parts: clutch, cooling and three-point linkage

After many seasons, a Fiat 88-94 tends to bring back the same jobs: an alternator that stops charging, a clutch that starts to slip, a thermostat that sticks. This page holds more than 250 replacement parts for this tractor from makers such as GRANIT, Cobo, MAHLE, LUK and Walterscheid.

Clutch and engine

On the clutch side there are double clutch pressure plates and thrust bearings. With the tractor split anyway, always replace the thrust bearing too, even if it still runs quietly. It is a small part, but if it starts whining later you are back to splitting the tractor. For the engine there are gear reduction starters, alternators, air filters, V-belts and gaskets, including those for the turbocharger at the exhaust manifold and for the water pump. Fit a new O-ring with every new thermostat. An old ring that has been squashed flat will almost always let coolant past once the engine warms up.

Air conditioning, seat and hydraulics

If your 88-94 has a cab with air conditioning, there are aircon compressors for this model. When you replace a compressor, flush the system and fit a new receiver drier, or debris from the failed unit ends up in the new one. Match the compressor oil quantity to the system as well, since too much oil cools poorly and too little wears the new compressor.

The driver gets air-suspended tractor seats. At the rear there are drawbars, lift rods and seals for the lift cylinder, such as the seal for the outer lift cylinder and piston sealing rings. If the linkage slowly drops with a load on it, those piston seals are the first thing to check.

Finding the part that fits

The type plate on the tractor tells you exactly which model you have. Fiat made several tractors in the 94 series that look much alike at first glance. When you remove a part, look for a stamped or printed reference number and compare it with the number shown with the product. With an alternator, check the flange and the pulley. With a V-belt, check the length printed on the back of the old belt.

Each tractor in the 94 series has its own page with the parts that fit that model:

Other Fiat models are on the Fiat parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart