Menu
EUR

Fiat 88-94 tractor parts & technical data

Running a Fiat 88-94 from the 94 series? This page lists more than 250 parts that fit it, with a wide choice of lighting, electrics and trailer couplings.

260 parts found for Fiat 88-94
Show:
Starter switch 12 V, blade terminal, parking light, Ø 40 mm
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Housing Ø 40 mm. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€27,50 €22,73
Cobo Lamp glass left
Cobo
Installation location: Left. Menke no.: 55039. More
Installation location: Left. Menke no.: 55039.
€27,80 €22,98
Cobo Rear light left 169 x 62 x 90 mm, 12 V, hole spacing 132 mm
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Plug. Width: 169 mm. Form: Rectangular. Height: 62 mm. Cable length: 0.11 m. Hole spacing: 132 mm. Dim... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Connection: Plug. Width: 169 mm. F...
€44,23 €36,55 €42,00 €34,71
You save 5%
Cobo Lens indicator/position light left / right
Cobo
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborghini, Landini, Massey Ferguson, Mc Cormick, Renault, Same More
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborgh...
€14,10 €11,65
FLEETGUARD Air filter AF25557, inner filters AF25558
FLEETGUARD
Suitable secondary element AF25558 More
Suitable secondary element AF25558
€61,14 €50,53 €58,00 €47,93
You save 5%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.663,76 €1.375,01 €1.580,55 €1.306,24
You save 5%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.214,60 €1.003,80 €954,30 €788,68
You save 21%
Bearing support center four-wheel drive Fiat 55-88 - 88-94
€246,09 €203,38 €233,75 €193,18
You save 5%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€33,94 €28,05 €32,20 €26,61
You save 5%
GRANIT Clutch DuT 280 35 x 40 mm, 14 splines, sintered Fiat, Ford
GRANIT
Dimensions (mm): 35 x 40, 14 grooves | Flywheel dimension (mm): 2 (erhöht) | Material specifications: Sintered clutch lining | Additional information... More
Dimensions (mm): 35 x 40, 14 grooves | Flywheel dimension (mm): 2 (erh...
€384,30 €317,60 €365,00 €301,65
You save 5%
HELLA Alternator 12 V, 55 A, pulley Ø 82 mm, 9 teeth
HELLA
No. of grooves: 1 | Nominal power (kW): 55 | Flange size (mm): 76 | Nominal voltage (V): 12 | Nominal values (V / A): 12 / 55 | Direction of rotation:... More
No. of grooves: 1 | Nominal power (kW): 55 | Flange size (mm): 76 | No...
€254,54 €210,36 €204,65 €169,13
You save 20%
MAHLE Starter motor 12V 2,8 kW, 9 teeth clockwise, mounting Ø 110 mm
€266,10 €219,92 €249,45 €206,16
You save 6%
Expander Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 52 mm. B: 31 mm. C: 12 mm. Ø D: 25 mm. Ø E: 20 mm. Ø F: 25 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€296,34 €244,91 €281,50 €232,64
You save 5%
GRANIT Brake hose Fiat, New Holland, Case IH, Ford
€60,44 €49,95 €57,40 €47,44
You save 5%
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
GRANIT Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€23,30 €19,26
GRANIT Lifting strut upper part Fiat Series 88 - 94, L 60-95
€155,48 €128,50 €147,70 €122,07
You save 5%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
GRANIT Drive shaft 820 mm, M18 x 1,5 / M16 x 1
GRANIT
Version: Thread: M18 x 1.5 / M16 x 1. More
Version: Thread: M18 x 1.5 / M16 x 1.
€33,30 €27,52
Hand brake cable 690 mm Fiat 60-56, 60-66, 55-88 - 88-94
To fit as: Fiat 60-56, 60-66, 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 80-90, 85-90, 60-93, 65-93, 72-93, 82-93, 88-93, 60-94, 6... More
To fit as: Fiat 60-56, 60-66, 55-88, 60-88, 65-88, 70-88, 80-88, 55-90...
€61,10 €50,50 €58,00 €47,93
You save 5%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
You save 5%
Showing 49 - 72 of 260

Fiat 88-94 parts: clutch, cooling and three-point linkage

After many seasons, a Fiat 88-94 tends to bring back the same jobs: an alternator that stops charging, a clutch that starts to slip, a thermostat that sticks. This page holds more than 250 replacement parts for this tractor from makers such as GRANIT, Cobo, MAHLE, LUK and Walterscheid.

Clutch and engine

On the clutch side there are double clutch pressure plates and thrust bearings. With the tractor split anyway, always replace the thrust bearing too, even if it still runs quietly. It is a small part, but if it starts whining later you are back to splitting the tractor. For the engine there are gear reduction starters, alternators, air filters, V-belts and gaskets, including those for the turbocharger at the exhaust manifold and for the water pump. Fit a new O-ring with every new thermostat. An old ring that has been squashed flat will almost always let coolant past once the engine warms up.

Air conditioning, seat and hydraulics

If your 88-94 has a cab with air conditioning, there are aircon compressors for this model. When you replace a compressor, flush the system and fit a new receiver drier, or debris from the failed unit ends up in the new one. Match the compressor oil quantity to the system as well, since too much oil cools poorly and too little wears the new compressor.

The driver gets air-suspended tractor seats. At the rear there are drawbars, lift rods and seals for the lift cylinder, such as the seal for the outer lift cylinder and piston sealing rings. If the linkage slowly drops with a load on it, those piston seals are the first thing to check.

Finding the part that fits

The type plate on the tractor tells you exactly which model you have. Fiat made several tractors in the 94 series that look much alike at first glance. When you remove a part, look for a stamped or printed reference number and compare it with the number shown with the product. With an alternator, check the flange and the pulley. With a V-belt, check the length printed on the back of the old belt.

Each tractor in the 94 series has its own page with the parts that fit that model:

Other Fiat models are on the Fiat parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart