Menu
EUR

Fiat 88-94 tractor parts & technical data

Running a Fiat 88-94 from the 94 series? This page lists more than 250 parts that fit it, with a wide choice of lighting, electrics and trailer couplings.

260 parts found for Fiat 88-94
Show:
Hand brake cable 690 mm Fiat 60-56, 60-66, 55-88 - 88-94
To fit as: Fiat 60-56, 60-66, 55-88, 60-88, 65-88, 70-88, 80-88, 55-90, 60-90, 65-90, 70-90, 80-90, 85-90, 60-93, 65-93, 72-93, 82-93, 88-93, 60-94, 6... More
To fit as: Fiat 60-56, 60-66, 55-88, 60-88, 65-88, 70-88, 80-88, 55-90...
€61,10 €50,50 €58,00 €47,93
You save 5%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
You save 5%
SACHS Clutch plate 280 22 x 25 mm, 10 splines
SACHS
Dimensions (mm): 22 x 25, 10 grooves More
Dimensions (mm): 22 x 25, 10 grooves
€135,53 €112,01 €128,75 €106,41
You save 5%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€188,76 €156,00 €179,30 €148,18
You save 5%
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5131169 More
Reference no.: 5131169
€253,62 €209,60 €240,90 €199,09
You save 5%
SANDEN Air conditioning compressor 12 V, pulley Ø 119 mm, 2 grooves, 200 ccm oil
SANDEN
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fixing: EM | Suitable oil: SP 10 | Oil quantity (ccm): 200 | Refrigerant: R 134a More
No. of grooves: 2 | Nominal voltage (V): 12 | Pulley Ø (mm): 119 | Fi...
€701,70 €579,92 €666,60 €550,91
You save 5%
GRANIT Bush 10 teeth Fiat Series 56 - 94, L 60-95, New Holland TN55-TN95
€46,46 €38,40 €44,10 €36,45
You save 5%
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,60 €213,72
GRANIT Gear lever knob Ø upper 20 mm, length 35 mm, thread M8
GRANIT
Version: Ø top 20 mm, length 35 mm, thread M8. More
Version: Ø top 20 mm, length 35 mm, thread M8.
€7,00 €5,79
Radiator Fiat 65-94, 72-94, 82-94, 88-94
To fit as: Fiat Series 94: 65-94, 72-94, 82-94, 88-94 More
To fit as: Fiat Series 94: 65-94, 72-94, 82-94, 88-94
€952,69 €787,35 €905,00 €747,93
You save 5%
GRANIT Water pump with flange-mounted design and gasket Ford, Fiat
GRANIT
To fit: Fiat. Reference no.: S.59000. Version: Old version with flange connection and gasket. Description: With gasket. More
To fit: Fiat. Reference no.: S.59000. Version: Old version with flange...
€122,95 €101,61 €116,80 €96,53
You save 5%
Cylinder head bolt M12 x 1,25 x 122 mm Ford, Fiat, New Holland
Dimensions: M12 x 1.25 x 122 mm. More
Dimensions: M12 x 1.25 x 122 mm.
€6,75 €5,58
Spacer 25 x 40 x 25 mm Fiat series 66 - 94, L 60 - L 95
Dimensions: 25 x 40 x 25 mm. More
Dimensions: 25 x 40 x 25 mm.
€10,00 €8,26
GRANIT Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€48,32 €39,93 €45,90 €37,93
You save 5%
GRANIT Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
GRANIT
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€24,15 €19,96
GRANIT Lifting shaft sealing ring 55 x 70 x 8/8,5 mm Ford, Fiat, New Holland
GRANIT
Dimensions: 55 x 70 x 8/8.5 mm. More
Dimensions: 55 x 70 x 8/8.5 mm.
€3,60 €2,98
Lift rod left 470 - 620 mm, eye Ø 22/27 x 97 mm, M27 x 3 Fiat
Eye Ø: 22 / 27 x 97 mm. Thread: M27 x 3 mm. Length min./max.: 470 - 620 mm. Fork inner width: 36,7 mm. More
Eye Ø: 22 / 27 x 97 mm. Thread: M27 x 3 mm. Length min./max.: 470 - 6...
€256,88 €212,30 €244,00 €201,65
You save 5%
GRANIT Lift rod right and left 650 - 730 mm, Ø lower 25, upper 26 mm Fiat
GRANIT
Dimensions: Length = min. 650, max. 730, Ø bottom 25, top 26, Clevis width inside 35 mm. More
Dimensions: Length = min. 650, max. 730, Ø bottom 25, top 26, Clevis ...
€213,20 €176,20 €202,50 €167,36
You save 5%
GRANIT Chock folding Fiat, Ford, New Holland
€162,87 €134,60 €154,70 €127,85
You save 5%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
Showing 73 - 96 of 260

Fiat 88-94 parts: clutch, cooling and three-point linkage

After many seasons, a Fiat 88-94 tends to bring back the same jobs: an alternator that stops charging, a clutch that starts to slip, a thermostat that sticks. This page holds more than 250 replacement parts for this tractor from makers such as GRANIT, Cobo, MAHLE, LUK and Walterscheid.

Clutch and engine

On the clutch side there are double clutch pressure plates and thrust bearings. With the tractor split anyway, always replace the thrust bearing too, even if it still runs quietly. It is a small part, but if it starts whining later you are back to splitting the tractor. For the engine there are gear reduction starters, alternators, air filters, V-belts and gaskets, including those for the turbocharger at the exhaust manifold and for the water pump. Fit a new O-ring with every new thermostat. An old ring that has been squashed flat will almost always let coolant past once the engine warms up.

Air conditioning, seat and hydraulics

If your 88-94 has a cab with air conditioning, there are aircon compressors for this model. When you replace a compressor, flush the system and fit a new receiver drier, or debris from the failed unit ends up in the new one. Match the compressor oil quantity to the system as well, since too much oil cools poorly and too little wears the new compressor.

The driver gets air-suspended tractor seats. At the rear there are drawbars, lift rods and seals for the lift cylinder, such as the seal for the outer lift cylinder and piston sealing rings. If the linkage slowly drops with a load on it, those piston seals are the first thing to check.

Finding the part that fits

The type plate on the tractor tells you exactly which model you have. Fiat made several tractors in the 94 series that look much alike at first glance. When you remove a part, look for a stamped or printed reference number and compare it with the number shown with the product. With an alternator, check the flange and the pulley. With a V-belt, check the length printed on the back of the old belt.

Each tractor in the 94 series has its own page with the parts that fit that model:

Other Fiat models are on the Fiat parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart