Even an electric truck like the Linde E35 needs a new part now and then. Choose from more than 30 matching items here, such as lighting, seats and electrics.
The Linde E35 is an electric forklift, and on trucks like this the wear tends to show up around the operator rather than in the drivetrain. Gas struts lose their push, seat cushions split, wiper blades smear and bulbs fail. This page brings together more than 30 replacement parts that fit the E35, made by GRANIT and by suppliers such as GRAMMER, HELLA, BOSCH and MANN-FILTER.
Start at the data plate to confirm the truck really is an E35. After that, the old part usually tells you more. Gas struts tend to carry a number printed on the body, which you can compare with the reference number listed with the product. For cushions, check which upper part the seat has, since a back cushion made for upper part 721 to 741 is meant for that seat family. For bulbs, pull the old one and read the base type off it before you order.
Where two struts work side by side, replace both at once. A fresh strut paired with a tired one ends up carrying the bulk of the load and wears out early. Fit the strut with the rod pointing down whenever the mounting allows it, which keeps the seal wetted with oil and helps the strut hold pressure. Prop the cover or door while you swap them, because without a strut it can drop without warning.
The same care applies to the cutting ring in a hydraulic fitting. If you rebuild a joint, use a new ring. An old ring has already bitten into the pipe at one spot and will rarely seal again somewhere else.
Running other trucks from the same maker alongside the E35 is common in a warehouse. All of them are collected on the Linde parts page, where you pick the model and go straight to the parts that fit it.