Menu
EUR

Linde H35 forklift parts & technical data

Is there a Linde H35 in your warehouse? See more than 60 matching parts for this diesel or LPG forklift, from lighting and seats to hydraulics.

69 parts found for Linde H35
Show:
VICTOR REINZ Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
GRANIT Piston ring set Massey Ferguson Series 400-8220, Linde
€50,99 €42,14 €48,40 €40,00
You save 5%
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm. More
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€22,70 €18,76
GRANIT Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
GRANIT
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 44 mm, Flange to lever end: 34 mm. More
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacin...
€38,50 €31,82 €36,55 €30,21
You save 5%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€46,86 €38,73 €44,50 €36,78
You save 5%
GRAMMER Seat belt lap belt ELR 22 mm, Maximo, Compacto W
GRAMMER
Lap belt (22 mm belt clip) with Duo Sensitiv function Retractor can only be fitted on the left | Sitzoberteil: 721, 722, 731, 732, 741 More
Lap belt (22 mm belt clip) with Duo Sensitiv function Retractor can on...
€203,64 €168,30 €193,45 €159,88
You save 5%
GRANIT Clamp 60 - 80 mm, band width 9 mm, DIN 3017, W1
GRANIT
Material: galvanised steel | Band width (mm): 9 | Clamping range (mm): 60 - 80 | DIN: 3017 | Form: 6 | PP: 1 | Quality: W1 More
Material: galvanised steel | Band width (mm): 9 | Clamping range (mm):...
€1,60 €1,32
Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
You save 55%
FEBI Air filter C13114/4
€37,09 €30,65 €16,38 €13,54
You save 56%
Housing inner-Ø 133,3 mm, height 24 mm, FPM, with flange
Material: FPM (fluoro rubber). Inner Ø d1: 133,3 mm. Height 1: 24 mm. Supplementary set: With flange / with mounting sleeves. More
Material: FPM (fluoro rubber). Inner Ø d1: 133,3 mm. Height 1: 24 mm....
€55,85 €46,16
GRANIT Back cushion PVC, black, upper part 20 and 90
GRANIT
To fit: DS83/20, DS83/90, DS85/20, DS85/90, MSG83/20, MSG85/20, MSG95A/20. Upholstery type: PVC. More
To fit: DS83/20, DS83/90, DS85/20, DS85/90, MSG83/20, MSG85/20, MSG95A...
€143,00 €118,18
GRANIT Back cushion fabric, black, upper part 20 and 90
GRANIT
Colour: Black. To fit: Upper part 20 and 90. Upholstery type: Fabric. More
Colour: Black. To fit: Upper part 20 and 90. Upholstery type: Fabric.
€150,00 €123,97
HELLA Cover for switch mounting holes mounting strip
HELLA
Additional information: - for closing intended switch installation openings in the mounting strips and in the mounting strip plug-in system. More
Additional information: - for closing intended switch installation ope...
€5,45 €4,50
HELLA Lens, left / right - 2 pieces
HELLA
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399 More
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399
€31,92 €26,38
Water pump Landini, Linde, McCormick
€112,63 €93,08 €106,95 €88,39
You save 5%
GRAMMER Tractor seat Maximo M MSG85/721 Still
GRAMMER
Seat type: MSG85/721. Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 480 mm. Restraint sy... More
Seat type: MSG85/721. Suspension: Mechanical. Upholstery type: Fabric....
€1.366,09 €1.129,00 €1.297,75 €1.072,52
You save 5%
BOSCH Wiper blade Twin 450 / 450 mm - 2 pieces
BOSCH
Length: 450 / 450 mm. Length: 18 / 18 inches. Version: Twin. Part no.: 837. Reference no.: 3397118505. More
Length: 450 / 450 mm. Length: 18 / 18 inches. Version: Twin. Part no.:...
€33,25 €27,48
GRANIT Seat cushion PVC, black, upper part 20 and 90
GRANIT
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, DS85/90, MSG83/20, MSG85/20, MSG95A/20. Upholstery type: PVC. Description: 90/20... More
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, ...
€162,13 €133,99 €154,00 €127,27
You save 5%
Showing 49 - 69 of 69

Linde H35 parts for the fuel system, engine and cab

When the engine cuts out halfway through a lift with a full pallet on the forks, you want to find the cause quickly. On the diesel Linde H35 it often lies in the fuel supply. The truck also comes with LPG drive, and for both there are more than 60 matching parts on this page from GRANIT, HELLA, GRAMMER, FEBI and BOSCH.

Feed pump and fuel filter

The feed pump draws diesel from the tank and delivers it to the injection pump. As it weakens, the engine still idles cleanly but falters as soon as you ask for power while lifting. Before replacing the pump, look at the fuel filter. A clogged filter causes exactly the same complaint and takes less time to change. After any work on the fuel side, bleed the system until only clear fuel without bubbles comes from the bleed screw.

Seals, exhaust and charging

For the engine there is a crankshaft seal, a further crankshaft sealing ring, an exhaust gasket, an alternator and a start switch. A blown exhaust gasket shows itself as a ticking or puffing noise on a cold start, often with black soot marks around the flange. Use new nuts if the old ones are seized or distorted, and tighten them evenly in a cross pattern so the flange pulls down flat.

If the battery stops charging, check the belt and the earth connection before you change the alternator. A slipping belt often squeals only for the first few minutes of a shift.

Air filters, cushions and visibility

  • Air filters and safety cartridges for the intake
  • Seat cushions and back cushions in black PVC
  • Black mirrors and wiper blades
  • Halogen bulbs and a symbol for the hazard light switch

An air filter left in too long makes the engine breathe harder, which shows as more smoke and less pull when lifting. A fixed interval for the filter change keeps that from happening.

Checking before you order

The data plate tells you whether the truck is an H35 and whether it runs on diesel or LPG, which matters for anything on the fuel side. Hold the number on the old filter or pump against the reference number shown with the product. With the alternator, the flange and pulley of the old unit help confirm that a replacement suits it.

If you run several trucks of this make, each model has a page of its own. They are grouped under Linde parts, so the rest of your fleet is covered just as quickly.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart