Menu
EUR

Linde H40 forklift parts & technical data

Hydraulics, lighting and seats with accessories: the Linde H40 on diesel or LPG is well covered here with more than 60 parts that fit this forklift.

63 parts found for Linde H40
Show:
GRANIT Piston ring set Massey Ferguson Series 400-8220, Linde
5%
GRANIT
Piston ring set Massey Ferguson Series 400-8220, Linde
€50,99 €42,14 €48,40 €40,00
 
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€22,70 €18,76
 
GRANIT Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
5%
GRANIT
Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 44 mm, ...
€38,50 €31,82 €36,55 €30,21
 
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
5%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod ...
€46,86 €38,73 €44,50 €36,78
 
GRANIT Clamp 60 - 80 mm, band width 9 mm, DIN 3017, W1
GRANIT
Clamp 60 - 80 mm, band width 9 mm, DIN 3017, W1
Material: galvanised steel | Band width (mm): 9 | Clamping range (mm): 60 - 80 |...
€1,60 €1,32
 
Air filter C15165/3, AF4135
55%
Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
 
FEBI Air filter C13114/4
56%
FEBI
Air filter C13114/4
€37,09 €30,65 €16,38 €13,54
 
Housing inner-Ø 133,3 mm, height 24 mm, FPM, with flange
Housing inner-Ø 133,3 mm, height 24 mm, FPM, with flange
Material: FPM (fluoro rubber). Inner Ø d1: 133,3 mm. Height 1: 24 mm. Supplement...
€55,85 €46,16
 
GRANIT Back cushion PVC, black, upper part 20 and 90
GRANIT
Back cushion PVC, black, upper part 20 and 90
To fit: DS83/20, DS83/90, DS85/20, DS85/90, MSG83/20, MSG85/20, MSG95A/20. Uphol...
€143,00 €118,18
 
GRANIT Back cushion fabric, black, upper part 20 and 90
GRANIT
Back cushion fabric, black, upper part 20 and 90
Colour: Black. To fit: Upper part 20 and 90. Upholstery type: Fabric.
€150,00 €123,97
 
HELLA Cover for switch mounting holes mounting strip
HELLA
Cover for switch mounting holes mounting strip
Additional information: - for closing intended switch installation openings in t...
€5,45 €4,50
 
HELLA Lens, left / right - 2 pieces
HELLA
Lens, left / right - 2 pieces
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399
€31,92 €26,38
 
GRAMMER Tractor seat Maximo M MSG85/721 Still
5%
GRAMMER
Tractor seat Maximo M MSG85/721 Still
Seat type: MSG85/721. Suspension: Mechanical. Upholstery type: Fabric. Seat cont...
€1.366,09 €1.129,00 €1.297,75 €1.072,52
 
BOSCH Wiper blade Twin 450 / 450 mm - 2 pieces
BOSCH
Wiper blade Twin 450 / 450 mm - 2 pieces
Length: 450 / 450 mm. Length: 18 / 18 inches. Version: Twin. Part no.: 837. Refe...
€33,25 €27,48
 
GRANIT Seat cushion PVC, black, upper part 20 and 90
5%
GRANIT
Seat cushion PVC, black, upper part 20 and 90
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, DS85/90, M...
€162,13 €133,99 €154,00 €127,27
 
Showing 49 - 63 of 63

Linde H40 parts for lights, visibility and the engine

With a heavy load on the forks and people in the aisle, clear visibility on a Linde H40 is not optional. A cracked lens, a loose mirror or a wiper blade that only smears are jobs worth doing straight away. For this forklift, whether it is a diesel, often written as H40D, or the LPG version, there are more than 60 matching parts from GRANIT, HELLA, GRAMMER, FEBI and BOSCH.

Lights and lenses

Lighting is covered by indicator and position lights, separate lenses for the left and right side, and halogen bulbs. If only the lens is cracked, replace just that and leave the lamp body in place. Clean the bulb holder while you are there. Green deposits on the contacts cause dim or flickering light even with a brand new bulb. Never touch the glass of a halogen bulb with bare fingers, as the grease burns in and shortens its life.

You will also find black mirrors, wiper blades and a symbol for the hazard light switch. A wiper blade with a torn rubber edge drags grit across the screen and leaves scratches over time, so it is worth changing early.

Under the bonnet

  • A rear crankshaft seal and an additional crankshaft sealing ring
  • An alternator and a start switch
  • Air filters and fuel filters
  • Cutting rings for hydraulic lines

Oil under the truck right where the engine meets the drive points to the rear crankshaft seal. When you replace it, check the running surface on the crankshaft. If the old seal has worn a groove, set the new one slightly deeper or further out so the lip runs on clean metal, otherwise it will soon leak again.

The operator seat

Seat cushions and back cushions in black PVC are available for the driver's seat. A split cover lets moisture into the foam, and the cushion then collapses quickly. It pays to swap a cushion as soon as the cover opens up. What decides the fit is the upper part of the seat the cushion is fixed to.

Data plate and other models

The data plate shows whether the truck is an H40 and which drive it has. With lighting, also check the side, since lenses and lights come in left and right versions. Compare the number on the old part with the reference number given with the product.

Other Linde forklifts have pages of their own, each showing the parts that suit that model, gathered together on Linde parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart